SMD050F-2 - TE Connectivity [Raychem]

Tyco / Electronics

Raychem Circuit Protection

308 Constitution Drive

Menlo Park, CA 94025

Phone: 800-227-4856

Fax: 800-227-4866

PolySwitch®

PTC Devices

Overcurrent Protection Devi ce

PRODUCT: SMD050F

DOCUMENT: SCD 25656

PCN: C62453

REV LETTER: B

REV DATE: MARCH 29, 2005

PAGE NO.: 1 OF 1

Specification Status: Released

Maximum Electrical Ratings

Operating Voltage / Interrupt Current

60V / 10A

12V / 60A

5V / 125A

Marking:

Notes:

1. All metal surfaces are tin plated.

2. Devices cannot be wave soldered.

3. Drawing not to scale.

TABLE I. DIMENSIONS:

A B C D E F G H

MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN

mm: 6.73 7.98 -- 3.18 4.8 5.44 0.56 0.71 0.20 0.30 2.16 2.41 0.66 1.37 0.43

in*: (0.265) (0.314) -- (0.125) (0.19) (0.214) (0.022) (0.028) (0.008) (0.012) (0.085) (0.095) (0.026) (0.054) (0.017)

TABLE II. PERFORMANCE RATINGS:

CURRENT RATINGS** TIME TO

TRIP** RESISTANCE

VALUES

TRIPPED-STATE

POWER

DISSIPATION**

AMPS

AT 0°C AMPS

AT 20°C AMPS

AT 60°C SECONDS AT

20°C, 2.5A OHMS

AT 20°C WATTS AT

20°C

HOLD TRIP HOLD TRIP HOLD TRIP MAX MIN MAX* MAX

0.55 1.10 0.50 1.00 0.33 0.66 4.0 0.35 1.4 1.7

* Maximum resistance is measured 1 hour after reflow.

** Values specified were determined using PCB’s with 0.070”X1.5 ounce copper traces.

Agency Recognition: UL, CSA and TÜV

Reference Documents: PS300, E.N. SMD 1.0x

Precedence: This specification takes precedence over documents referenced herein.

Effectivity: Reference documents shall be the issue in effect on the date of invitation for bid.

CAUTION: Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.

Materials Information

ROHS Compliant ELV Compliant Pb-Free