42 420-002 SealtiteTM/Liquidtite Conduit Backshell Direct Coupling - Low Profile 420 F S 002 M 16 03-6 CONNECTOR DESIGNATORS * A-B -C-D-E-F G-H-J-K-L-S * Conn. Desig. B See Note 6 DIRECT COUPLING Product Series Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Connector Designator Cable Entry (Table V) Angle and Profile A = 90 B = 45 S = Straight Shell Size (Table I) Finish (Table II) Basic Part No. Length .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) A Thread (Table I) Length * Sealtite/Liquidtite Conduit or Equivalent (Customer Furnished) O-Ring B (Table I) STYLE 2 (STRAIGHT) J K ** * Length .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) M ** ** (Table V) J G (Table III) (Table IV) E (Table III) (Table IV) B (Table I) N Wrench Flat (Table V) L ** F (Table IV) B (Table I) H (Table IV) (c) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 42 - Page 4 42 420-002 SealtiteTM/Liquidtite Conduit Backshell Direct Coupling - Low Profile Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F C J-H-L-S D-B-G-K 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) Elbow Size 01 02 03 04 05 06 07 Dash No. 01 02 03 04 05 06 07 Conduit Size (Ref.) 3/8 1/2 3/4 1 1 1/4 1 1/2 2 (c) 2005 Glenair, Inc. See inside back cover fold-out or pages 13 and 14 for Tables I and II. 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. Sealtite is a trademark of Anaconda Corp. 6. When using Connector Designator B refer to pages 18 and 19 for part number development. TABLE IV: ELBOW DIMENSIONS E G F Max Max Max .630 (16.0) 1.870 (47.5) .709 (18.0) .692 (17.6) 1.930 (49.0) .734 (18.6) .848 (21.5) 2.130 (54.1) .990 (25.1) 1.036 (26.3) 2.320 (58.9) 1.090 (27.7) 1.130 (28.7) 2.470 (62.7) 1.325 (33.7) 1.317 (33.5) 2.620 (66.5) 1.827 (46.4) 1.348 (34.2) 2.710 (68.8) 2.027 (51.5) H Max 1.940 (49.3) 1.960 (49.8) 2.120 (53.8) 2.290 (58.2) 2.400 (61.0) 2.820 (71.6) 2.820 (71.6) TABLE V: CABLE ENTRY K Dimension L Dimension Max Min Max Min .504 (12.8) .690 (17.5) .710 (18.0) .484 (12.3) .642 (16.3) .820 (20.8) .840 (21.3) .622 (15.8) .840 (21.3) 1.030 (26.2) 1.050 (26.7) .820 (20.8) 1.290 (32.8) 1.315 (33.4) 1.041 (26.4) 1.066 (27.1) 1.630 (41.4) 1.660 (42.2) 1.380 (35.1) 1.410 (35.8) 1.875 (47.6) 1.900 (48.3) 1.575 (40.0) 1.600 (40.6) 2.350 (59.7) 2.375 (60.3) 2.020 (51.3) 2.045 (51.9) CAGE Code 06324 M Max 1.155 (29.3) 1.282 (32.6) 1.531 (38.9) 1.781 (45.2) 2.218 (56.3) 2.468 (62.7) 3.031 (77.0) N Max Wrench Flat 1.000 (25.4) 1.125 (28.6) 1.375 (34.9) 1.625 (41.3) 2.062 (52.4) 2.312 (58.7) 2.875 (73.0) Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 42 - Page 5