Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Metal (Oxide) Film Resistors
E
1
R
2
G
3 4
2
5
S
6
J
7 8
1
9
0
10
3
11 12
12
1
2
3
5
0.5 W
1W
2W
3W
5W
Power Rating
at 70 °C Amb.
ERG
ERX
Metal Oxide
Film Resistors
Metal Film
Resistors
Product Code Special Feature
S
F
Small size
0.5 W to 5 W
G
J
±2%
±5%
Resistance
Tolerance
The first two digits are significant figures of resistance
and the third one denotes number of zeros following.
Decimal point is expressed by
Ras2.7=2R7.
Ant-heat conducting
for PCB
Small size
(Fe lead wire type)
1Wto5W
···
···V
···P
U···V
···E
W···E
S···E
···H
Straight lead wire type
Axial paping type (Straight lead)
Cut & Forming type
Axial paping type (Stand off)
Radial taping type (E type)
Radial taping type (WE type)
Radial taping type (SE type)
Cut & Forming type
ERG(X)12S ±2% 0.10 to 0.91 () 1.0 to 9.1 ()10to22k ()
±5% 0.10 to 0.18 () 0.20 to 9.1 ()10to47k ()
ERG(X)1S ±2% 0.10 to 0.91 () 1.0 to 9.1 ()10to68k ()
±5% 0.10 to 0.18 () 0.20 to 9.1 ()10to100k ()
ERG(X)2S ±2% 0.10 to 0.91 () 1.0 to 9.1 ()10to100k ()
±5% 0.10 to 0.20 () 0.22 to 9.1 ()10to100k ()
ERG(X)3S ±2% 0.10 to 0.91 () 1.0 to 9.1 ()10to100k ()
±5% 0.10 to 0.20 () 0.22 to 9.1 ()10to100k ()
ERG(X)5S ±2% _1.0 to 9.1 ()10to100k ()
±5% 0.33 to 9.1 ()10to100k ()
Part No.
Resistance
Resistance range
Tolerance
ERX첸첸SZ ERX첸첸SERG첸첸S
Part No.
Resistance
Resistance range
Tolerance
ERX첸첸FZ ERX첸첸F ERG첸첸F
ERG(X)1F ±2% 0.10 to 0.91 () 1.0 to 9.1 ()10to68k ()
±5% 0.10 to 0.18 () 0.20 to 9.1 ()10to100k ()
ERG(X)2F ±2% 0.10 to 0.91 () 1.0 to 9.1 ()10to100k ()
±5% 0.10 to 0.20 () 0.22 to 9.1 ()10to100k ()
ERG(X)3F ±2% 0.10 to 0.91 () 1.0 to 9.1 ()10to100k ()
±5% 0.10 to 0.20 () 0.22 to 9.1 ()10to100k ()
ERG(X)5F ±2% _1.0 to 9.1 ()10to100k ()
±5% 0.33 to 9.1 ()10to100k ()
Forming / Packaging Forming & Taping matrix
Code 12S 1S 2S 3S 5S 1F 2F 3F 5F
앩앩앩앩
앩앩앩앩
앩앩앩앩
앩앩
앩앩
앩앩앩앩
앩앩
앩앩
Resistance Value
Metal (Oxide) Film Re sis tors
Type: ERG(X)S (Small size)
(0.5 W, 1 W, 2 W, 3 W, 5 W)
ERG(X)F
(Anti-heat conducting for PCB)
(1 W, 2 W, 3 W, 5 W)
Features
Miniaturized
50 % smaller compared to existing models
Non-fl ammable
High Reliability
Automatic Insertion
Reference Standards
IEC 60115-2, IEC 60115-4, JIS C 5201-4, EIAJ RC-2138
Explanation of Part Numbers
The above example shows a small size metal oxide fi lm resistor, 2 W pow er rat ing, resistance value of 10 k ohms, tolerance ±5 %, and pack age of
standard bulk packing.
Feb. 2006
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Metal (Oxide) Film Resistors
fd
fDkk L
–60 –40 –20 0 20 40 60 80 100 120 140 160 180 200 220 240
0
20
40
60
80
100
120
130 °C
70 °C–55 °C
ERG(X)12S
ERG(X)1S, 1F
ERG(X)3S, 3F
ERG(X)5S, 5F
235 °C
Ambient Temperature (°C)
Rated Load (%)
ERG(X)2S, 2F
Construction Dimensions in mm (not to scale)
Ratings
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the fi gure on the right.
Type
Power
Rating
at 70 °C
(W)
L
imiting
Element
Voltage
(Maximum
RCWV)
(1)
(V)
Maximum
Overload
Voltage(2)
(V)
Maximum
Intermittent
Overload
Voltage(3)
(V)
Dielectric
With-
stand ing
Voltage
(VAC)
Res.
Tol .
(%)(4)
Resistance
Range ()(5) T.C.R.
[҂10–6/°C
(ppm/°C)]
Standard
Resistance
Value
min.(6) max.
ERG(X)12S
0.5 300 600 600 350 G (±2) 1 22 k ±350 E24
J (±5) 0.2 47 k
ERG(X)1S
ERG(X)1F
1 350 600 600 350 G (±2) 1 68 k ±350 E24
J (±5) 0.2 100 k
ERG(X)2S
ERG(X)2F
2 350 700 1000 600 G (±2) 1 100 k ±350 E24
J (±5) 0.22 100 k
ERG(X)3S
ERG(X)3F
3 350 700 1000 1000 G (±2) 1 100 k ±300 E24
J (±5) 0.22 100 k
ERG(X)5S
ERG(X)5F
5 500 1000 1500 1000 G (±2) 1 100 k ±200 E24
J (±5) 0.33 100 k
Type
Dimensions (mm) Mass
(Weight)
[g/pc.]
LfDkfd
ERG(X)12S
6.35+0.65 2.3+0.5 30.0±3.0 0.65±0.05 0.26
ERG(X)1S
ERG(X)1F
9.00+1.50 2.8±0.5 30.0±3.0 0.65±0.05 0.33
ERG(X)2S
ERG(X)2F
12.00+1.50 4.0±1.0 30.0±3.0 0.80±0.05 0.66
ERG(X)3S
ERG(X)3F
15.00±1.50 5.5±1.0 38.0±3.0 0.80±0.05 1.47
ERG(X)5S
ERG(X)5F
24.00±1.50 8.0±1.0 38.0±3.0 0.80±0.05 3.54
–0.3
–0.35
–1.00
–1.00
Code Type Res.
T
ol.
Res. Value Range
Code Type Res.
T
ol.
Res. Value Range
Z
12S ±2 %
0.1 to 0.91
Z
2S
2F
±2 %
0.1 to 0.91
±5 %
0.1 to 0.18
±5 %
0.1 to 0.2
1S
1F
±2 %
0.1 to 0.91
3S
3F
±2 %
0.1 to 0.91
±5 %
0.1 to 0.18
±5 %
0.1 to 0.2
(1) Rated Continuous Working Voltage (RCWV) shall be determined
from RCWV=Power Rating҂Resistance Value or Limiting Element
Voltage (max. RCWV) listed above whichever less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) shall be de-
termined from SOTV=2.5҂Power Rating or max. Overload Voltage
listed above whichever less.
(3) Intermittent Overload Test Voltage (IOTV) shall be determined from
IOTV=4.0҂Power Rating or max. Intermittent Overload Voltage listed
above whichever less.
(4) Resistance tolerance is of use besides range listed, please inquire.
(5) Resistance Range Type ERG : >10
Type ERX : <9.1
(6) As for the low resistance value range, "Z" is given to the part
number. (Refer to the explanation of part numbers.)
Z type is non standard resistance values.
High reliable metal oxide fi lm (ERG)
High reliable metal plating fi lm
(ERX)
Flame and solvent retardant
End cap
Spi ral ling
turns
Ceramic core
(High ther mal con duc tiv i ty)
Lead wire
S type : Cu wire
F type : Fe wire
( )
Marking
Feb. 2006
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Metal (Oxide) Film Resistors
Marking
a
b
c
6.0±0.5
W
PP
fd
crush width 0.8 mm (1 W)
1.1 mm (2 W, 3 W)
HH
W
W1
fd
S
L
f 0.80±0.05
1.0
1.4±0.2
fD
Upper surface
of PW board
h
5.0±1.5
S
LfD
Upper surface
of PW board
h
0.8 (0.5W,1W)
1.0 (2 W, 3 W, 5 W)
1.2±0.2 (0.5 W, 1 W)
1.4±0.2 (2 W, 3 W, 5 W)
f 0.65±0.05 (0.5 W, 1 W)
f 0.80±0.05 (2 W, 3 W, 5 W)
4.0±1.5
ERG(X) 첸첸S첸첸첸첸VERG(X) 첸첸SU첸첸첸V
Part Number
Standard
Quantity
(pcs./box)
Dimensions (mm)
LfDS h
ERG(X)12S첸첸첸첸P2000 6.35+0.65 2.3+0.5 10.0±1.5 4.0±1.5
ERG(X)1S첸첸첸첸P2000 9.00+1.50 2.8±0.5 12.5±1.5 4.0±1.5
ERG(X)2S첸첸첸첸P1000 12.00+1.50 4.0±1.0 15.0±1.5 6.0±1.5
ERG(X)3S첸첸첸첸P1000 15.00±1.50 5.5±1.0 20.0±2.0 6.5±1.5
ERG(X)5S첸첸첸첸P500 24.00±1.50 8.0±1.0 30.0±2.0 7.5±1.5
–1.00
–1.00
–0.35 –0.3
Part Number
Standard
Quantity
(pcs./box)
Dimensions (mm)
LfDS h
ERG(X)2F첸첸첸첸H1000 12.0+1.5 4.0±1.0 15.0±1.5 6±2
ERG(X)3F첸첸첸첸H1000 15.0±1.5 5.5±1.0 20.0±2.0 10±2
ERG(X)5F첸첸첸첸H500 24.0±1.5 8.0±1.0 30.0±2.0 10±2
–1.0
ERG(X) 첸첸S첸첸첸첸P
ERG(X) F첸첸첸첸H
Taped & Box: Stand-off Taped & Box:
Cut & Formed Type
Part Number
Standard
Quantity
(pcs./box)
Taping (mm) Box (mm)
P50
҂PW H W
1fda b c
ERG(X)12S첸첸첸첸첸V2000 5.0±0.3 250±2 52.0±1.5 ——
0.65±0.05
85 80 255
ERG(X) 1S첸첸첸첸첸V2000 5.0±0.3 250±2 52.0±1.5 ——
0.65±0.05
85 80 255
ERG(X) 1SU첸첸첸V12.0+0 1.2+0.15
ERG(X) 2S첸첸첸첸첸V1000 5.0±0.3 250±2 52.0±1.5 ——
0.80±0.05
85 80 255
ERG(X) 2SU첸첸첸V15.5+0 1.4+0.15
ERG(X) 3S첸첸첸첸첸V1000 10.0±0.5 500±2 74.0±2.0 ——
0.80±0.05
105 100 325
ERG(X) 3SU첸첸첸V23.0+0 1.4+0.15
–2.0
–2.0
–2.0 0
– 0
– 0
Feb. 2006
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Metal (Oxide) Film Resistors
a
b
c
Marking
P1P
AB
FP2
H1
H0
W1
W
fd
fD
P0fD0
P0fD0
fd
W
H1
P1
F
PP
2
fD
A
Insulated
Lead
W1
H0
Type ERG(X) 첸첸S첸첸첸첸E (12S, 1S, 2S)
Type ERG(X) 첸첸SW첸첸첸E (12S, 1S, 2S, 3S)
Dimensions (mm) Dimensions (mm) Dimensions (mm) Dimensions (mm) Dimensions (mm)
P 12.7±1.0 W 18.0±0.5
H1
12S 32 max.
A
12S 6.35+0.65
fD
12S 2.3+0.5
P012.7±0.3 W19.0±0.5 1S 32 max. 1S 9.0+1.5 1S 2.8±0.5
P13.85±0.70 2S 38 max. 2S 12.0+1.5 2S 4.0±1.0
P26.35±1.00 H016.0±0.5 fd 0.65±0.05
F 5.0±0.8 fD04.0±0.2
–0.3–0.35
–1.0
–1.0
Part Number Dimensions (mm) Standard Quantity
(pcs./box)
abc
ERG(X)12S첸첸첸첸E46 130 335 2000
ERG(X) 1S첸첸첸첸E46 130 335 2000
ERG(X) 2S첸첸첸첸E49 100 335 1000
For Panasert Au to mat ic Insertion Machine Radial Tape & Box
For Panasert Automatic Insertion Machine Radial Taped & Box
Radial Tape Package Specifi cations
–0.35
–1.0
–1.0
–0.3
Dimensions (mm) Dimensions (mm)
P12S 12.7±1.0 fD012S, 1S, 2S, 3S 4.0±0.2
1S, 2S, 3S 30.0±1.0
A
12S 6.35+0.65
P0
12S 12.7±0.3 1S 9.0+1.5
1S, 2S, 3S 15.0±0.3 2S 12.0+1.5
P1
12S 6.3 5±1.00 3S 15.0 ±1.5
1S, 2S, 3S 7.5±1.0
B
12S 11.2 max.
P2
12S 3.85±0.70 1S 14.0 max.
1S, 2S, 3S 3.75±0.50 2S 17.0 max.
F12S 5.0±0.5 3S 21.0 max.
1S, 2S, 3S 7.0.8
fD
12S 2.3+0.5
W12S, 1S, 2S, 3S 18.0±0.5 1S 2.8± 0.5
W112S, 1S, 2S, 3S 9.0±0.5 2S 4.0±1.0
H0
12S 16.0±0.5 3S 5.5±1.0
1S, 2S 18.0±1.0 fd12S f0.65±0.05
3S 19.0±1.0 1S, 2S, 3S f0.80±0.05
H1
12S 6.5+0.6
1S, 2S 6.5+1.0
3S 8.0+1.0
– 0
– 0
– 0
Feb. 2006
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Metal (Oxide) Film Resistors
P1P
F
P2
H2
H1
H0
fd
P0
fD0
fD
W1
W
A B
a
b
c
Marking
Type ERG(X) FS첸첸첸E (1F, 2F, 3F)
Type Dimensions (mm) Standard Quantity
(pcs./box)
abc
ERG(X)12SW첸첸첸E46 145 325 2000
ERG(X) 1SW첸첸첸E49 150 317 1000
ERG(X) 1FS첸첸첸E
ERG(X) 2SW첸첸첸E49 150 317 500
ERG(X) 2FS첸첸첸E
ERG(X) 3FS첸첸첸E49 190 315 500
For Panasert Automatic Insertion Machine Radial Taped & Box
Radial Tape Package Specifi cations
Dimensions (mm) Dimensions (mm)
P 30.0±1.0 H21.0±0.3
P015.0±0.3 fD04.0±0.2
P17.5±1.0
A
1F 9.0+1.5
P23.75±0.50 2F 12.0+1.5
F 7.5±0.8 3F 15.0±1.5
W 18.0±0.5
B
1F 14 max.
W19.0±0.5 2F 17 max.
H016.0+1.0 3F 21 max.
H0
1F 7.0+1.0
fD
1F 2.8±0.5
2F 8.0+1.0 2F 4.0±1.0
3F 9.0+1.0 3F 5.5±1.0
fd 0.80±0.05
–1.0
–1.0
– 0
– 0
– 0
– 0
Feb. 2006
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Metal (Oxide) Film Resistors
A
B
Measuring position
25 50 75 1000
+50
+100
+150
+200
+250
Rated Load (%)
TemperatureT(°C)
1S-A
1S-B
12S-A
12S-B
25 50 75 1000
+50
+100
+150
+200
+250
Rated Load (%)
TemperatureT(°C)
2F-A
2S-A
2S-B
2F-B
25 50 75 1000
+50
+100
+150
+200
+250
Rated Load (%)
TemperatureT(°C)
3F-A
3S-A
3S-B
3F-B
25 50 75 1000
+50
+100
+150
+200
+250
Rated Load (%)
TemperatureT(°C)
5F-A
5S-A
5S-B
5F-B
Hot-spot Temperature (for Reference)
The temperature of the resistor body increases with the curve below. A touching vinyl wire may cause damages
to resistor element. Do not place vinyl wires around resistors and be sure to consider where the resistors will be
placed.
Safety Precautions
The following are precautions for individual products. Please also refer to the precautions common to Fixed
Resistors shown on page ER3 of this catalog.
1. Transient voltage
If there is a possibility that the transient phenomenon (signifi cantly high voltage applied in a short time) may
occur or that a high voltage pulse may be applied, make sure to evaluate and check the characteristics of
Metal(Oxide) Film Resistors (hereafter called the resistors) mounted on your product rath er than only depending
on the calculated pow er limit or steady-state conditions to complete the design or decide to use the resistors.
2. The resistors are covered with a special coating. Do not apply shock or vibration to them, or pinch them with
long-nose pliers. Otherwise, the resistors may be damaged.
3. Do not apply excessive tension to the lead-connect ed sections. When bending the lead wire, do not apply
excessive stress to the resistors and provide the wire with a natural curvature.
4. Do not brush the resistors during or after the cleaning process, which may be conducted after soldering.
Otherwise, the coating fi lm may be damaged.
Feb. 2006
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Metal (Oxide) Film Resistors
t
T
PP(VP)
Type K Vp max. (V)
ERG(X)12S 0.5 600
ERG(X) 1S 0.5 600
ERG(X) 2S 0.5 700
ERG(X) 3S 0.5 700
ERG(X) 5S 0.5 1000
PP :Pulse limit power (W)
VP :Pulse limit voltage (V)
t :Pulse continuous time (s)
T : Period (s)
VR :Rated voltage (V)
P : Rated power (W)
R : Resistance value ()
Vp max. : Max. pulse limit volt age (V)
Pulse Char ac ter is tics (Usual)
(Data for Reference)
T>1(s) T=1(s)
T/t>100 T/t=100
PP<P P stands for PP
(VP<VR V
R stands for VP)
Added voltage<Vp max.
PP or VP is referent value
Conditions:Pulse added time=1000 h
Resistance change=±5 %
Room temperature
Withstand pulse limit power is calculated by the next
method.
PP= K·P·T/t
VP=K·P·R·T/t
Reference to the right about a fi xed number of VP max.
Feb. 2006
– ER3 –
Safety Precautions
(Common precautions for Fixed Resistors)
• When using our products, no matter what sort of equipment they might be used for, be sure to make a written
agreement on the specifi cations with us in advance. The design and specifi cations in this catalog are subject
to change without prior notice.
Do not use the products beyond the specifi cations described in this catalog.
• This catalog explains the quality and performance of the products as individual components. Be fore use, check
and evaluate their operations when installed in your products.
• Install the following systems for a failsafe design to ensure safety if these products are to be used in equip ment
where a defect in these products may cause the loss of human life or other signicant damage, such as damage to
vehicles (au to mo bile, train, vessel), trafc lights, medical equipment, aerospace equipment, elec tric heating
ap pli anc es, com bus tion/gas equipment, rotating equipment, and disaster/crime prevention equip ment.
Systems equipped with a protection circuit and a protection device
Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault
(1) Precautions for use
• These products are designed and manufactured for general and stan dard use in general elec tron ic
equipment (e.g. AV equipment, home electric ap pli anc es, ofce equipment, information and com mu ni ca tion
equipment)
• These products are not intended for use in the following special conditions. Be fore using the products, care ful ly
check the effects on their quality and performance, and determine whether or not they can be used.
1. In liquid, such as water, oil, chemicals, or organic solvent
2. In direct sunlight, outdoors, or in dust
3. In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
4. Electric Static Discharge (ESD) Environment
These components are sensitive to static electricity and can be damaged under static shock (ESD).
Please take measures to avoid any of these environments.
Smaller components are more sensitive to ESD environment.
5. Electromagnetic Environment
Avoid any environment where strong electromagnetic waves exist.
6. In an environment where these products cause dew condensation
7. S ea ling or co ating of these products or a printed circuit board on which these products are mounted, with resin
or other materials
• These products generate Joule heat when energized. Carefully position these products so that their heat will not
affect the other components.
• Carefully position these products so that their temperatures will not exceed the category temperature range due
to the effects of neighboring heat-generating com po nents. Do not mount or place heat-generating com po nents or
infl ammables, such as vinyl-coated wires, near these products .
• Note that non-cleaning solder, halogen-based highly active fl ux, or water-soluble fl ux may deteriorate the
performance or reliability of the products.
• Carefully select a fl ux cleaning agent for use after soldering. An unsuitable agent may deteriorate the
performance or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave
water res i dues. Otherwise, the insulation performance may be deteriorated.
(2) Precautions for storage
The performance of these products, including the solderability, is guaranteed for a year from the date of arrival at your
company, provided that they remain packed as they were when delivered and stored at a temperature of 5 °C to 35 °
C and a relative humidity of 45 % to 85 %.
Even within the above guarantee periods, do not store these products in the fol low ing conditions. Otherwise, their
elec tri cal performance and/or solderability may be deteriorated, and the packaging materials (e.g. tap ing ma te ri als)
may be de formed or deteriorated, resulting in mounting failures.
1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
2. In direct sunlight
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
Feb. 2006