THIRD ANGLE PROJ.
REV
DWG SIZE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE:
6 - 30mm
0.5 - 6mm 30 - 120mm ANGLES
<0.5mm
NOTICE - These drawings, specifications, or other data (1) are, and remain the
property of Amphenol corp. (2) must be returned upon request; and (3) are
confidential and not to be disclosed to any person other than those to whom they
are given by Amphenol Corp. the furnishing of these drawings, specifications, or
other data by Amphenol Corp., or to any other person to anyone for any purpose is
not to be regarded by implication or otherwise in any manner licensing, granting
rights to permitting such holder or any other person to manufacture, use or sell
any product, process or design, patented or otherwise, that may in any way be
related to or disclosed by said drawings, specifications, or other data.
EAR#
REF:
REF11,40
0.449[ ]
AREA "A"
1.50 MAX.
[0.059]
FROM BODY TO HST
REF26,45
1.041[ ]
3,25
0.128[ ]
1,20
0.047[ ]
1,18
0.046[ ]
5,33
0.210[ ]
REF
TYP(2)
4,60
0.181[ ]
REF
MAX. PANEL THICKNESS
3,20
0.126[ ]
x45$0,20
0.008[ ]
CENTER CONDUCTOR
3,30
0.130[ ]
BRAID
7,90
0.311[ ]
DIELECTRIC & FOIL
1,90
0.075[ ]
6,50
0.256[ ]
6,00
0.236[ ]
REVISIONS
REV DESCRIPTION DATE ECN APPR
A RELEASE TO MFG. 17-Oct-19 13304 VR
901-10662
PART NO.
901-10662
ITEM NO.
901-10662
DRAWING NO.
Amphenol RF
www.amphenolrf.com
AB
SHEET 2 OF 2SCALE: 5.5:1.0
SMA STR BHD JACK IP 67
FOR LMR 200 CABLE
TITLE
CAD FILE
17-Oct-19K.CAPOZZI
DATE APPROVED
06-Feb-19KRISHNA S
DATE ENGINEER
06-Feb-19
KRISHNA S
DATE DRAWN
FINISH
CONFIGURATION LEVEL: In Work
901-10641
8898
REFERENCE
SEE NOTES
MATERIAL
4. PACKAGING:
A. QUANTITY: SINGLE PACK
B. MARKING: BAG TO BE MARKED
"AMPHENOL RF, 901-10662 AND DATE CODE"
5. CABLE ASSEMBLY INSTRUCTIONS:
A. TRIM CABLE AS SHOWN.
B. SLIDE HEAT SHRINK TUBING, FERRULE AND INSULATOR DISC ONTO CABLE.
C. SOLDER CABLE CENTER CONDUCTOR TO CONTACT.
D. INSERT CABLE, UNTIL IT BOTTOMS, WITH FOIL ENTERING CONNECTOR
AND BRAID OVER KNURL.
E. CRIMP FERRULE OVER BRAID WITH 0.213" HEX DIE.
F. APPLY HEAT SHRINK TUBING OVER FERRULE.
G. HEAT SHRINK TUBING SHOULD FULLY (360$) COVER THE BUMP ON BODY
AND END WITHIN AREA "A".
6 ADHESIVE LINED HEAT SHRINK TUBE (ITEM 10) IS INCLUDED (NOT SHOWN).
7. SHOWS CABLE ENTRY DIMENSIONS
NOTES:
1. MATERIALS AND FINISHES:
BODY, HEX NUT & LOCKWASHER - BRASS, NICKEL PLATING
INSULATOR & INSULATOR DISC - PTFE, NATURAL
CONTACT - BeCu, GOLD PLATING
GASKET - SILICONE RUBBER, RED
FERRULE - COPPER, NICKLE PLATING
HEAT SHRINK TUBING - CROSSLINKED POLYOLEFIN, BLACK
O-RING - FLUORO SILICONE RUBBER, BLACK
2. ELECTRICAL:
A. IMPEDANCE: 50 OHM
B. FREQUENCY RANGE: DC - 8 GHz
C. VSWR: 1.20 MAX.
3. MECHANICAL:
A. DURABILITY: 500 CYCLES MIN.
B. TEMPERATURE RANGE: -65$C TO +165$C
RECOMMENDED CABLE
STRIPPING DIMENSIONS
SCALE 1.500
INSULATOR DISC FERRULE
LOCK WASHER
O-RING
INTERFACE PER
MIL-STD-348
SERIES: SMA JACK
5.85 [0.230]
'D' FLAT
1/4-36UNS-2A
THREAD
CONTACT
11.00 MM WRENCH
8.00 MM WRENCH
RECOMMENDED MOUNTING
HOLE DIMENSIONS
CUSTOMER OUTLINE DRAWING
ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY
777
7
