■Model Encoding / Order Information
■Description
RSP-1600 is a 1.6KW single output enclosed type AC/DC power supply with a 1U low profile and a high
power density up to 25W/inch . This series operates for 90~264VAC input voltage and offers the models
3
with the DC output mostly demanded from the industry. Each model is cooled by the thermostatically
controlled fan. Moreover, RSP-1600 provides vast design flexibility by equipping various built-in functions
such as the output programming, active current sharing, remote ON-OFF control, auxiliary power, etc.
Factory control or automation apparatus
Test and measurement instrument
Laser related machine
Aging facility
Digital broadcasting
Constant current source
Redundant system
■Features ■Applications
Universal AC input / Full range
(Withstand 300VAC surge input for 5 seconds)
Built-in active PFC function
High efficiency up to 93%
Forced air cooling by built-in DC fan
Output voltage and constant current level programmable
Active current sharing up to 9600W (5+1)
Built-in remote ON-OFF control / remote sense /
auxiliary power DC OK signal / OTP alarm signal
/
Protections: Short circuit / Overload / Over voltage
/ Over temperature
Optional PMBus or CANBus protocol
5 years warranty
1600W Power Supply with Single Output RSP-1600 series
3.35
Dimension
L
300
11.8
W
85
H
41 (1U)
(1U)
mm
inch1.61
*
*
*
*
*
*
File Name:RSP-1600-SPEC 2020-10-13
Type Communication Protocol
PM
CAN
Blank None
PMBus protocol
CANBus protocol
Note
By request
By request
In Stock
R33100
RoHS
CNS14336-1 UL62368-1 TPTC004 IEC62368-1EN62368-1
Bauar
Sicherheit
egel gema
t gepruft
od
be
www.
ID 2000000000
tuv.com
wac g
os
Output wattage
Communication protocol option
Output voltage (12V/24V/27V/36V/48V)
48RSP - -1600
Series name
SPECIFICATION
1600W Power Supply with Single Output RSP-1600 series
File Name:RSP-1600-SPEC 2020-10-13
RSP-1600-12 RSP-1600-24 RSP-1600-27
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT VOLTAGE ADJ. RANGE
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE Note.5
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
INPUT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
AC CURRENT (Typ.) Note.5
12V 24V 27V
125A 67A 59A
0 ~ 125A 0 ~ 67A 0 ~ 59A
1500W 1608W 1593W
150mVp-p
11.5 ~ 15V
200mVp-p 200mVp-p
23.5 ~ 30V 26.5 ~ 33.5V
±1.0% ±1.0% ±1.0%
±0.5%
±0.5%
1500ms, 60ms/230VAC at full load
16ms / 230VAC at 75% load 10ms / 230VAC at full load
90 ~ 264VAC 127 ~ 370VDC
47 ~ 63Hz
0.97/230VAC at full load
89%
COLD START 35A/230VAC
14A/115VAC 8A/230VAC
15A/115VAC 8.5A/230VAC
<2mA / 230VAC
RSP-1600-48RSP-1600-36
48V36V
33.5A44.5A
0 ~ 33.5A0 ~ 44.5A
1608W1602W
300mVp-p250mVp-p
47.5 ~ 58.8V35.5 ~ 45V
±1.0%±1.0%
±0.5% ±0.5% ±0.5%±0.5%
±0.5% ±0.5% ±0.5%±0.5%
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.4
91.5% 92% 93%92%
OVER TEMPERATURE
OVERLOAD
OVER VOLTAGE
105 ~ 115% rated output power
15.75 ~ 18.75V
Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
31.5 ~ 37.5V 35.2 ~ 41.9V 63 ~ 75V47.2 ~ 56.3V
PROTECTION
ALARM SIGNAL
REMOTE SENSE
REMOTE ON-OFF CONTROL
AUXILIARY POWER 5V @ 0.3A, 12V @ 0.8A
FUNCTION
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-30 ~ +70 (Refer to "Derating Curve")℃
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH℃non-condensing
±℃ ℃0.03%/ (0 ~ 50 )
ENVIRONMENT
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS
WITHSTAND VOLTAGE
UL62368-1, CAN/CSA C22.2 , TUV EN62368-1 , EAC TP TC 004 approved
,,BSMI CNS14336-1 AS/NZS62368.1No. 62368-1
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCE
MTBF
DIMENSION
PACKING
OTHERS
160.9K hrs min. Telcordia SR-332 (Bellcore) ; 42.1K hrs min. MIL-HDBK-217F (25 )℃
300*85*41mm (L*W*H)
SAFETY &
EMC
(Note 7)
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃
2.1Kg;6pcs/13.6Kg/1.25CUFT
Parameter
Parameter
ESD
Radiated
EFT / Burst
Surge
Conducted
Magnetic Field
Voltage Dips and Interruptions
Conducted
Radiated
Harmonic Current
Voltage Flicker
Standard
Standard
EN55032 (CISPR32)
EN55032 (CISPR32)
EN61000-3-2
EN61000-3-3
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
Test Level / Note
Test Level / Note
Class B
Class A
Class A
-----
NOTE
EMC IMMUNITY
EMC EMISSION
Isolated signal output for T-alarm and DC OK
Compensate voltage drop on the load wiring up to 0.5V. Please refer to the Function Manual
By electrical signal or dry contact Power ON:short Power OFF:open. Please refer to the Function Manual
Adjustment of output voltage is allowable to 40 ~ 125% of nominal output voltage (60 ~ 125% for 12V).
Please refer to the Function Manual.
EN55024, EN61000-6-2, BSMI CNS13438
Level 3, 8KV air ; Level 2, 4KV contact
Level 3
Level 3
Level 4, 2KV/Line-Line 4KV/Line-Earth
Level 3
Level 4
>95% dip 0.5 periods, 30% dip 25 periods,
>95% interruptions 250 periods
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Under parallel operation ripple of the output voltage may be higher than the SPEC at light load condition. It will go back to normal ripple level once the
output load is more than 5%.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
6. PV/PC functions when users are not operating on PMBus/CANBus. SVR functions when users are neither operating on PMBus/CANBus nor using PV/PC.
7. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.720 360 For guidance on how to
perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
8. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃
※ Product Liability Disclaimer For detailed information, please refer to ： https://www.meanwell.com/serviceDisclaimer.aspx
Protection type : Constant current limiting, unit will shut down o/p voltage after 5 sec. re-power on to recover
Adjustment of constant current level is allowable to 20 ~ 100% of rated current.
Please refer to the Function Manual.
OUTPUT VOLTAGE
PROGRAMMABLE(PV) Note 6
OUTPUT CURRENT
PROGRAMMABLE(PC) Note 6
81
82
83
84
85
86
87
88
89
90
91
92
93
94
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
EFFICIENCY (%)
LOAD
◎The curve above is measured at 230VAC.
PFC fosc : 90KHz
PWM fosc : 70KHz
LIMITING
ACTIVE
CURRENT
INRUSH
CONTROL
I/P RECTIFIERS
&
FILTER
SWITCHING
POWER
RECTIFIERS
FILTER
EMI
PWM CIRCUIT
DETECTION
POWER
AUX
&
PFC
FILTER
&
12V/0.8A
AUX POWER
PFC
CONTROL
5V/0.3A
MCU
DETECTION
CIRCUIT
O.V.P.
MCU
O.T.P.
DA/DB
PV/PC
DC-OK
SDA/SCL or
CANH/CANL
(
(
T-Alarm
Remote ON-OFF
FAN
+V
+S
-S
RECTIFIERS
ORING
FET
-V
ORING FET
CONTROL
TRANSCEIVERS
DATA
ISOLATION
AMBIENT TEMPERATURE ( )℃
LOAD (%)
230VAC
Input only
-30 -25 0-10 15 30 50 60 70
20
40
60
50
80
100
(HORIZONTAL)
LOAD (%)
INPUT VOLTAGE (VAC) 60Hz
90 100 115 180 264
80
90
100
70
60
50
40
30
Derating Curve Efficiency vs Load (48V Model)
Static Characteristics
MODEL
INPUT 12V
1500W
1200W
1050W
900W
1608W
1286.4W
1125.6W
964.8W
1593W
1274.4W
1115.1W
955.8W
1602W
1281.6W
1121.4W
961.2W
1608W
1286.4W
1125.6W
964.8W
125A
100A
87.5A
75A
67A
53.6A
46.9A
40.2A
59A
47.2A
41.3A
35.4A
44.5A
35.6A
31.15A
26.7A
33.5A
26.8A
23.45A
20.1A
180~264VAC
115VAC
100VAC
90VAC
24V 27V 36V 48V
1600W Power Supply with Single Output RSP-1600 series
File Name:RSP-1600-SPEC 2020-10-13
Block Diagram
※In addition to the adjustment via the built-in potentiometer, the output voltage can be trimmed by applying EXTERNAL VOLTAGE.
2. Output Voltage Programming (or, PV / remote voltage programming / remote adjust / margin programming / dynamic voltage trim)
60 80 100 125 V
100
40
60
80
20
OUTPUT CURRENT (%)
OUTPUT VOLTAGE (%)
40
EXTERNAL VOLTAGE (DC)
Function Manual
40
60
OUTPUT VOLTAGE(%)
EXTERNAL VOLTAGE (DC)
100
125
Vout
0.40 1 4.7 5 V
Non-Linear
12V
Others
◎The rated current should change with the Output Voltage Programming accordingly.
◎For Remote Sense / Local Sense, please refer to “Voltage Drop Compensation” section.
CN1
PIN14 -V(signal)
PIN12 PV
+V
-V
1600W Power Supply with Single Output RSP-1600 series
File Name:RSP-1600-SPEC 2020-10-13
◎The +S signal should be connected to the positive terminal of the load whereas -S signal to the negative terminal.
1.Voltage Drop Compensation
Sense lines should be twisted in pairs to minimize noise pick-up.
LOAD
LOAD
-V
-V
+V
+V
PIN16 -S
PIN15 +S
PIN16 -S
PIN15 +S
PIN13 +V(signal)
PIN14 -V(signal)
CN1
CN1
+V
+V
-V
-V
※The Remote Sense compensates voltage drop on the load wiring up to 0.5V
1.1 Remote Sense
1.2 Local Sense
※ The +S,-S have to be connected to the +V(signal), -V(signal), respectively, as the following diagram, in order to get the correct output voltage if
Remote Sense is not used.
1600W Power Supply with Single Output RSP-1600 series
File Name:RSP-1600-SPEC 2020-10-13
4. Remote ON-OFF Control
5. Alarm Signal Output
※The power supply can be turned ON/OFF individually or along with other units by using the "Remote ON-OFF" function.
※There are 2 alarm signals, DC OK and T-ALARM, in TTL signal form, on CN1. These signals are isolated from output. The maximum sink current
is 10mA.
Between Remote ON-OFF and +5V-AUX
Switch Short
Switch Open
Power Supply Status
ON
OFF
switch
PIN4 Remote ON-OFF
PIN6 T-ALARM
PIN2 GND-AUX
Application
Circuit
PIN3 +5V-AUX
PIN5 DC OK
CN1
CN1
+V
+V
-V
-V
3. Constant Current Level Programming (or, PC / remote current programming / dynamic current trim)
Iout
V
0.4 1 4.7 5
20
100
EXTERNAL VOLTAGE (VDC)
OUTPUT CURRENT (%)
Non-Linear
110
※The constant current level can be trimmed to 20~100% of the rated current by applying EXTERNAL VOLTAGE.
EXTERNAL VOLTAGE (DC)
CN1
PIN14 -V(signal)
PIN11 PC
+V
-V
◎For Remote Sense / Local Sense, please refer to “Voltage Drop Compensation” section.
6.Current Sharing with Remote Sense
RSP-1600 has the built-in active current sharing function and can be connected in parallel, up to 6 units, to provide higher output power as exhibited below :
※The power supplies should be paralleled using short and large diameter wiring and then connected to the load.
※Difference of output voltages among parallel units should be less than 0.2V.
※The total output current must not exceed the value determined by the following equation:
the current shared among units may not be balanced.
※ ×When the total output current is less than 5% of the total rated current, or say (5% of Rated current per unit) (Number of unit)
※Under parallel operation ripple of the output voltage may be higher than the SPEC at light load condition. It will go back to normal ripple level once the
output load is more than 5%.
※CN500/SW1 Function pin connection
◎-V(signal)DA,DB and are connected mutually in parallel.
◎For Remote Sense / Local Sense, please refer to “Voltage Drop Compensation” section.
(V : CN500 connected ; X : CN500 not connected.)
Parallel
CN500 CN500 CN500 CN500 CN500 CN500SW1 SW1 SW1 SW1 SW1 SW1
PSU1 PSU2 PSU3 PSU4 PSU5 PSU6
1 unit X
OFF
OFF
OFF
OFF
OFF
OFF OFF
OFF OFF OFF
ON
ON
ON
ON
ON
ON
∣
∣∣
∣∣
∣
∣
∣
∣
∣
∣
∣
∣∣
∣∣∣
∣
∣
∣
∣
∣
∣
∣
∣∣
∣∣∣
∣
ONV
VV
V
V
V
ON
V
V
V
ON
ON
ON
V
V
V
V
VV
V
V
V
V
V
2 unit
3 unit
4 unit
5 unit
6 unit
Maximum output current at parallel operation=(Rated current per unit) (Number of unit) 0.9××
DA DA DA DA DA DA
DB DB DB DB DB
DB DB DB DB DB DB
RSP-1600 RSP-1600 RSP-1600 RSP-1600 RSP-1600 RSP-1600
+V
If the lines of CN500 are too long, they should
be twisted in pairs to avoid the noise.
-V
LOAD
33333
PSU2 CN500 PSU3 CN500 PSU4 CN500 PSU5 CN500
PSU6 CN500PSU1 CN500
Fig 5.1
222222444444666666
TB1
-V
+V
TB1
-V
+V
TB1
-V
+V
TB1
-V
+V
TB1
-V
+V
TB1
-V
+V
DA DA DA DA DA DADB -V(signal) -V(signal) -V(signal) -V(signal) -V(signal) -V(signal)
-V(signal) -V(signal) -V(signal) -V(signal) -V(signal) -V(signal)
PSU1 PSU2 PSU3 PSU4 PSU5 PSU6
3111111555555
1600W Power Supply with Single Output RSP-1600 series
File Name:RSP-1600-SPEC 2020-10-13
Twisted wires
Mechanical Specification
Case No.250 Unit:mm
※Mounting Instruction
Hole No. Recommended Screw Size MAX. Penetration Depth LRecommended mounting torque
1
2
M3 4mm
M4 5mm
1600W Power Supply with Single Output RSP-1600 series
4Remote
ON-OFF
2
7,8,9
GND-AUX
NC
A0,A1,A2
Auxiliary voltage output GND.
The signal return is isolated from the output terminals (+V & -V).
For standard model: Retain for future use.
For PMBus / CANBus model: PMBus / CANBus interface address lines. (Note.1)
Pin No.
5
6
3
1
Function
DC-OK
T-ALARM
+5V-AUX
+12V-AUX
Description
High (4.5 ~ 5.5V) : When the Vout 80% 5%.≦±
Low (-0.1 ~ 0.5V) : When Vout 80% 5%.≧±
The maximum sourcing current is 10mA and only for output. (Note.2)
Auxiliary voltage output, 4.5~5.5V, referenced to GND-AUX (pin2).
Auxiliary voltage output, 10.6~13.2V, referenced to GND-AUX (pin2).
The maximum load current is 0.3A. This output has the built-in "Oring diodes" and is not controlled by “Remote ON-OFF
The maximum load current is 0.8A. This output has the built-in "Oring diodes" and is not controlled by “Remote ON-OFF”.
12
11
10
PV
PC
NC
Connection for output voltage . (Note.1)programming
15 +S Positive sensing for remote sense.
High (4.5 ~ 5.5V) : When the internal temperature exceeds the limit of temperature alarm, or when Fan fails.
Low (-0.1 ~ 0.5V) : When the internal temperature is normal, and when Fan normally works.
The maximum sourcing current is 10mA and only for output(Note.2)
Connection for constant current level programming. (Note.1)
Retain for future use.
1
2
15
16
※Control Pin No. Assignment( ) : HRS DF11-16DP-2DS or equivalentCN1
Mating Housing
Terminal
HRS DF11-16DS or equivalent
HRS DF11-**SC or equivalent
6~8Kgf-cm
7~1 Kgf-cm0
16 -S Negative sensing for remote sense.
15
16
LED SW1
2
8
-V
+V
2
1
10
2
3
9
I/P
CN1 CN500
28
38
1
2
12 max.
ψ6.5
13
(Bottom View)
3-M3 L=4
16.1
70
7.5
264.7
5.8 252
(Top View)
22.8
22.8
42.5
41
300
5.8 252
1
11
2 2
2 2
2-M4 L=5
2-M4 L=5
1
7
Air flow
85
direction
30
21.6
29.6
20
SVR
13
14
+V (Signal)
-V (Signal)
Positive output voltage signal.
Negative output voltage signal.
It is for local sense; it cannot be connected directly to the load.
It is for local sense and certain function reference; it cannot be connected directly to the load.
Mounting Screw
Mounting Surface Chassis of RSP-1600
The unit can turn the output ON/OFF by electrical signal or dry contact between and . (Note.2)Remote ON/OFF +5V-AUX
Short (4.5 ~ 5.5V) : Power ON ; Open (0 ~ 0.5V) : Power OFF ; The maximum input voltage is 5.5V.
2-M3
File Name:RSP-1600-SPEC 2020-10-13
Note.1: Non-isolated signal, referenced to [-V(signal)].
Note.2: Isolated signal, referenced to GND-AUX.
1600W Power Supply with Single Output RSP-1600 series
File Name:RSP-1600-SPEC 2020-10-13
Installation Manual
Please refer to : http://www.meanwell.com/manual.html
LED
Green
Red
The power supply functions normally.
Description
Abnormal status (Over temperature protection, Overload protection, Fan fail.)
LED Status Indicators※
※AC Input Terminal Pin No. Assignment
Pin No.
1
3
2
Assignment Diagram Maximum mounting torque
8Kgf-cm
AC/N
AC/L
FG
Pin No.
Pin No.
1,2
1,2
7
8
5,6
3,4
Function
Function
DA
Terminal
resistance
NC
NC
SDA
SCL
CANH
CANL
-V (Signal)
DB
Description
Description
Differential digital signal for parallel control.
SW1 is the selector of terminal resistor that is designed for DA/DB signals and parallel control function.
Differential digital signal for parallel control.
For standard model: None.
For standard model: None.
For PMBus model: Serial Data used in the PMBus interface. (Note)
For PMBus model: Serial Clock used in the PMBus interface. (Note)
For CANBus model: Data line used in CANBus interface. (Note)
For CANBus model: Data line used in CANBus interface. (Note)
※Control Pin No. Assignment(SW1)
7
8
1
2
※Control Pin No. Assignment( ) : HRS DF11-8DP-2DS or equivalentCN500
Mating Housing
Terminal
HRS DF11-8DS or equivalent
HRS DF11-**SC or equivalent
Negative output voltage signal.
It is for certain function reference; it cannot be connected directly to the load.
Note: Isolated signal, referenced to GND-AUX.
