Push Buttons and Operator Interface Specifiers Guide XVP Illuminated Indicating Banks Supplement Class 9001 CONTENTS Schneider Electric Brands Description Page XVP Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 XVP Bank Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 XVP Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 XVP Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 XVP Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 XVP Illuminated Indicating Banks Characteristics CHARACTERISTICS Environment Product certifications UL Listed, CSA Certified File E164353 CCN NKCR Conforming to standards File LR 44087 Class 3211 03 CE Marked File E164353 CCN NKCR 2 IEC/EN 60947-5-1. UL 508 Protective Treatment "TC" Ambient Air Temperature (Storage) -40 to + 158 F -40 to +70 C Operation Illuminated lens unit, steady, with LED or 7 W incandescent bulb -13 to +122 F (-25 to +50 C) Flashing Units with LED or 7 W incandescent bulb Units with Strobe Audible Sounder Units Electric Shock Protection conforming to IEC 536 Tube mounting Class 1 Direct mounting on base unit Class 2 Degree of Protection To IEC 60529 and NF C 20-010 To UL 50 and CSA 22.2 No. 94 IP 65 Type 1, 12, 13 Material Illuminated lens unit Polycarbonate Base unit and top cover ABS + Polycarbonate Ring on lens and base Polyamide Tube mounting Aluminum Tulip ABS + Polycarbonate Electrical Characteristics Rated Insulation Voltage (UL) Conforming to IEC 60947-1 250 Vac Consumption LED unit 24 Vac/Vdc: <60 mA 120-230 Vac: <20 mA Rated Impulse withstand voltage Steady Incandescent bulb 7W 24 Vac/Vdc: <300 mA; 120-230 Vac: 65-35 mA Flashing 24 Vac or 24 Vdc <250 mA; 120-230 Vac < 30mA Unit with strobe (on energization) 24 Vdc: 0.3 Joules, 40 mA; 120 Vac: 0.6 Joules, 20mA; 230 Vac: 0.6 Joules, 11mA Audible sounder units 24 Vdc, 12 mA; 120 Vac, 15 mA; 230 Vac, 15 mA Conforming to IEC 60947-1 U imp = 4 kV Bulb type Illuminated units, steady or flashing Bayonet type BA 15d; 5 W minimum power; 7 W maximum power Illuminating Power Strobe Units 0.3 Joules, 24 Vdc, 1.2 cd; 0.6 Joules, 120 Vac, 5.0 cd; 0.6 Joules, 230 Vac, 5.0 cd Audible sounder units Signal At one meter: 75-85 dB Terminal marking Common 1 terminal marked -/N Depending on type of units 1 to 5 terminals marked 1+/L to 5+/L Ground Marked with grounding symbol Cable size Maximum wire size 2 x #16 AWG (1.5 mm2) with cable end Terminals Torque requirement Removable and captive screw terminals: 4.4 lb-in (0.5 Nm) Ring tongue connectors Burndy YAV14RL33 Wire: 20-14 AWG Studs: 4-6 Width: 0.25 in. Frequency of Illuminated units Strobe Units 0.7 Hz-2.0 Hz Specific Characteristics of Protected LED Bulbs Voltage limits Nominal voltage 24 V: 19.2 to 30 Vdc; 21.6 to 24.6 Vac 120 V: 100 to 132 Vac 240 V: 200 to 264 Vac Current consumption Applicable to all colors 24 Vac/Vdc supply: 24 mA 120 Vac supply: 18 mA 240 Vac supply: 18 mA Service life At nominal voltage and at an ambient temperature of 77 F (25 C) 100,000 hours Surge withstand Conforming to IEC 61000-4-5 1 kV (differential) Resistance to fast transients Conforming to IEC 61000-4-4 2 kV Resistance to electromagnetic fields Conforming to IEC 61000-4-3 10 V/m Resistance to electrostatic discharges Conforming to IEC 61000-4-2 8/6 kV Electromagnetic emission Conforming to EN 55011 Class B 2 (c) 2001 Schneider Electric All Rights Reserved 11/01 XVP Illuminated Indicating Banks Components COMPONENTS Base Units with Cover (for direct or tube mounting) Description Color For use with Indicating Banks Catalog Number 50 mm base unit Black 50 mm diameter only XVPC21 50 mm base unit Off-white 50 mm diameter only XVPC21W 50 mm diameter only XVPC21WR 50 mm base unit with ring-tongue compatible terminal XVPC21 Illuminated Lens Units (Steady or Flashing) Description Ring Color Light Source and Voltage Lens Color Catalog Number 50 mm steady lens unit Black Bulb (7 W max) not included 250 V max Green Red Amber Blue Clear Yellow XVPC33 XVPC34 XVPC35 XVPC36 XVPC37 XVPC38 Off-white Bulb (7 W max) not included 250 V max Green Red Amber Blue Clear Yellow XVPC33W XVPC34W XVPC35W XVPC36W XVPC37W XVPC38W (See part numbers under "LEDs" on page 4 to select steady or flashing mode) XVPC37 Illuminated Lens Units with Strobe Description Ring Color Light Source and Voltage Lens Color Catalog Number 50 mm strobe lens unit Black Strobe 24 Vdc 0.3 Joule Green Red Amber Blue Clear Yellow XVPC6B3 XVPC6B4 XVPC6B5 XVPC6B6 XVPC6B7 XVPC6B8 Strobe 120 Vac 0.6 Joule Green Red Amber Blue Clear Yellow XVPC6G3 XVPC6G4 XVPC6G5 XVPC6G6 XVPC6G7 XVPC6G8 Strobe 230 Vac 0.6 Joule Green Red Amber Blue Clear Yellow XVPC6M3 XVPC6M4 XVPC6M5 XVPC6M6 XVPC6M7 XVPC6M8 Strobe 24 Vdc 0.3 Joule Green Red Amber Blue Clear Yellow XVPC6B3W XVPC6B4W XVPC6B5W XVPC6B6W XVPC6B7W XVPC6B8W Strobe 120 Vac 0.6 Joule Green Red Amber Blue Clear Yellow XVPC6G3W XVPC6G4W XVPC6G5W XVPC6G6W XVPC6G7W XVPC6G8W Strobe 230 Vac 0.6 Joule Green Red Amber Blue Clear Yellow XVPC6M3W XVPC6M4W XVPC6M5W XVPC6M6W XVPC6M7W XVPC6M8W XVPC33 XVPC6B8 Off-white XVPC6G6 XVPC6M5 3 11/01 (c) 2001 Schneider Electric All Rights Reserved XVP Illuminated Indicating Banks Components Audible Sounder Units Description Ring Color Supply Voltage Catalog Number 50 mm sounder unit Black 24 Vdc XVPC09B 120 Vac XVPC09G Ten tone selections, 75-85 dB at 1 m Off-white XVPC09B 230 Vac XVPC09M 24 Vdc XVPC09BW 120 Vac XVPC09GW 230 Vac XVPC09MW LEDs Description Voltage Color Catalog Number Steady-On LEDs 24 Vac/Vdc White Green Red Blue Yellow/Amber DL1BDB1 DL1BDB3 DL1BDB4 DL1BDB6 DL1BDB8 120 Vac White Green Red Blue Yellow/Amber DL1BDG1 DL1BDG3 DL1BDG4 DL1BDG6 DL1BDG8 230 Vac White Green Red Blue Yellow/Amber DL1BDM1 DL1BDM3 DL1BDM4 DL1BDM6 DL1BDM8 24 Vac/Vdc White Green Red Blue Yellow/Amber DL1BKB1 DL1BKB3 DL1BKB4 DL1BKB6 DL1BKB8 120 Vac White Green Red Blue Yellow/Amber DL1BKG1 DL1BKG3 DL1BKG4 DL1BKG6 DL1BKG8 230 Vac White Green Red Blue Yellow/Amber DL1BKM1 DL1BKM3 DL1BKM4 DL1BKM6 DL1BKM8 DL1BDB1 Flashing LEDs DL1BKB1 NOTE: Protected LEDs provide additional circuit protection against overvoltage, overcurrent, and electrostatic discharge. See page 2. Incandescent Bulbs DL1BEJ Description Voltage Bayonet type BA 15d, 7 W 12 Vac/Vdc Catalog Number DL1BEJ 24 Vac/Vdc DL1BEB 48 Vac/Vdc DL1BEE 120 Vac/Vdc DL1BEG 230 Vac/Vdc DL1BEM 4 (c) 2001 Schneider Electric All Rights Reserved 11/01 XVP Illuminated Indicating Banks Accessories ACCESSORIES Description Color Characteristics Catalog Number Threaded tube with bracket Silver 100 mm (4 in.) XVPC02T 250 mm (10 in.) XVPC03T Tube with tulip base Black Off-white Wall mounting bracket XVPC12 Bulb mounting tool 400 mm (16 in.) XVPC04T 100 mm (4 in.) XVPC02 250 mm (10 in.) XVPC03 400 mm (16 in.) XVPC04 100 mm (4 in.) XVPC02W 250 mm (10 in.) XVPC03W 400 mm (16 in.) XVPC04W Black -- XVPC12 Off-white -- XVPC12W -- -- XVPCX13 XVPC03T XVPC02 Does not include lens units XVPC02W WIRING DIAGRAM Cable Connections O Supply line max.: 1.5 mm2 (#16 AWG) +/4 wire 5 wire 4 wire 3 wire 2 wire 1 wire 6 green-yellow +/5 XVPC21 XVPC21W captive screw +/3 +/2 O 12 0.47 +/1 -/C XVPC21WR removable screw 5 11/01 (c) 2001 Schneider Electric All Rights Reserved XVP Illuminated Indicating Banks Dimensions DIMENSIONS Pozidriv no. 1 screw terminals: 2 x 1.5 mm 2 (16 AWG) cover 24 0.9 Bases +/2 Date code (YYWW) 1 +/ +/ 3 ring +/4 O 56 2.2 XVP-C21 EN/IEC 60 947-5-1 IP65 Ue:12...230V Indonesia 39 1.5 base 5 +/ -/C Encl. Type 4x Indoor Use only and 13 O 54 2.1 Steady Lights for BA15d Bulbs 2 0.1 flat gasket Dimensions in mm (in.) O 54 2.1 lampholder XVP-C33 O-ring 46 x 1.5 (1.8 x 0.06) +50 C Ue:12...230V BA15d 7W max IP65 -25 C IEC/EN 60 947-5-1 lens Encl. Type 12 and 13 Indoor Use Only 81.5 3.2 Indonesia Date code (YYWW) ring Dimensions in mm (in.) O 56 2.2 Strobes XVP-C6B3 +50 C Ue:24V 0,6 Joule Imax:40mA IP65 -25 C IEC/EN 60 947-5-1 Encl. Type 12 and 13 Indoor Use only Indonesia 6 (c) 2001 Schneider Electric All Rights Reserved 11/01 XVP Illuminated Indicating Banks Dimensions Tube Stands Stand with tulip base Threaded tubular stand with bracket O12.5 0.5 O12.5 0.5 O16 0.6 O16 0.6 tube O-ring 100 3.9 tube 42 1.7 glued tube O-ring 20 0.8 tulip O70 2.8 flat gasket thickness = 2 (0.08) 2 x O9 (0.4) O20 (0.8) 4 x O4,8 (0.2) O70 2.8 Wall Mounting Bracket Dimensions in mm (in.) XVP-C12 wall bracket 75 3.0 42.5 1.7 11 4.3 0 O3 0.12 cover 50 2.0 O4 0.16 2 x O4.5 0.18 2 x O9 0.35 Dimensions in mm (in.) 7 11/01 (c) 2001 Schneider Electric All Rights Reserved XVP Illuminated Indicating Banks Dimensions Audible Sounder Units 85 dB max assembly ring Date code (YYWW) XVP-C09B +50 C 1-7 -25 C IEC/EN 60 947-5-1 Ue:24V Imax: 12mA IP43 LISTED Ind. Cont. Eq. Volume control Tone selection Indonesia label Platine PCB Tone No. 109 4.3 housing ring O56 2.2 Square D Company 8001 Highway 64 East Knightdale, NC 27545 1-888-SquareD (1-888-778-2733) www.SquareD.com Schneider Canada Inc. 19 Waterman Avenue, M4B 1 Y2 Toronto, Ontario 1-800-565-6699 www.schneider-electric.ca Tone Setting 6 5 2 1 Frequency Description 1 5 1 6 2 Alternating 800 Hz / 1000 Hz at 0.25 s intervals 2 5 1 6 2 Slow whoop 500 Hz / 1200 Hz at 0.3 Hz with 0.5 s gap--repeated 3 5 1 6 2 Sawtooth 1200 Hz / 500 Hz at 1Hz 4 5 1 6 2 Alternating 544 Hz for 100 ms / 440 Hz for 400 ms (NF S 32-001) 5 5 1 6 2 Continuous at 1000 Hz 6 5 1 6 2 Simulated bell sound 7 5 1 6 2 Sweeping 800 Hz / 1000 Hz at 7 Hz 8 5 1 6 2 Sweeping 2400 Hz / 29000 Hz at 50Hz 9 5 1 6 2 420 Hz repeating 0.625 s On, 0.625 s Off 10 5 1 6 2 550/1200 Hz Sweeping 3.75 s On, 0.25 s Off (15 cycles/minute) Factory Setting Catalog No. 9001CT0101 November 2001 (c) 2001 Schneider Electric All Rights Reserved Supplement to Catalog No. 9001CT0001 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schneider Electric: DL1BDB1 DL1BDB3 DL1BDB4 DL1BDB8 DL1BDG3 DL1BEB DL1BEE DL1BEG DL1BKB4