MIL-C-26482, Series I Crimp
Commercial and Military QPL’d
PWF/MS Receptacle
and Plug Connectors
Array PWF Series
Crimp/Bayonet
Coupling Connectors
ARRAY CONNECTOR CORPORATION
US Headquarters And Manufacturing Facilities:
12555 S. W. 130th Street • Miami, FL 33186
Phone: (305) 234-1000 • Fax: (305) 234-6601 • www.arrayconnector.com
®
1) Coupling nut
2) Wave washer
3) Back shell
4) Compression sleeve
5) Grommet
6) Pin contact
7) Pin insert
8) Socket insert
9) Socket contact
10) Plug shell
11) Receptacle shell
12) Gasket
13) Contact retention disk
Nine shell sizes are
available and twenty-
four insert arrange-
ments with both pin
and socket contacts.
PWF00/MS3120
Wall Mount Receptacle
PWF01/MS3121
In-Line Receptacle
PWF02/MS3122
Box Mount Receptacle
PWF06/MS3126
Straight Plug
PWF07/MS3124
Jam Nut Receptacle
(Environmental)
Design Solutions ISO 9001
ACC and are registered trademarks of Array Connector Corporation.
CONTENTS
Product Data and Polarization.....................................................................................3
Nomenclature Guide and Cross Reference.................................................................4
Contacts Arrangements...............................................................................................5
Panel Mounting Data....................................................................................................6
Series PWF00/MS3120 Wall Mount Receptacle.........................................................7
Series PWF01/MS3121 In-Line Receptacle................................................................8
Series PWF02/MS3122 Box Mount Receptacle..........................................................9
Series PWF07/MS3124 Jam Nut Receptacle..........................................................10
Series PWF06/MS3126 Straight Plug.......................................................................11
Series PW80/MS3180 and PW81/MS3181 Protective Caps....................................12
Contact Data..............................................................................................................13
Crimping Instructions.................................................................................................14
FEATURES
Array’s PWF family of connectors meet or exceed the requirements of MIL-C-26482
Series I Crimp and are listed in the U.S. Department of Defense Qualified Parts List.
These connectors are available in 9 shell sizes and 24 insert arrangements, all inter-
mateable and interchangeable with connectors produced in accordance with MIL-C-
26482 Series I and Series II. Standard contact termination is by crimping using stan-
dard crimp tools: either automated wire stripping and crimping machines or manually
with the use of hand crimping tools. Contact insertion and extraction is also accom-
plished with the use of standard tools.
Designed for wire sizes AWG 16 through 24, these highly durable connectors are
used in wide variety of applications including aerospace, military equipment, machine
tools, robotics, communications, medical equipment, automation equipment, and
industrial sensors to name just a few.
Shells and hardware are made of high strength aluminum alloys and are available
with a variety of plated or anodized finishes. Contacts are machined from solid cop-
per alloy and gold plated in accordance with MIL-G-45204 type II. With a standard
operating temperature range of -55ºC to +125ºC available with a variety of acces-
sories and features, Array’s PWF series is widely called out by design engineers and
specifiers seeking reliability and durability throughout a broad range of environmental
requirements.
ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601
®
ARRAY CONNECTOR CORPORATION
®Array PWF Series
Crimp/Bayonet Coupling Connectors
MIL-C-26482, Series I Crimp
Commercial and Military QPL’d
Array Connector Corporation produces high quality products. These products are intended to be used in accordance with the specifications described in this catalog. Any use or application that devi-
ates from the stated operating specifications is not recommended and may be unsafe. Alimited warranty is applicable. Except for obligations assumed by Array Connector Corporation under
warranty, Array will be not be liable for any loss, damage, repairs, incidental or consequential damages of any kind, whether or not based upon expressed or implied warranty, contract,
negligence, or liability arising from the application or manufacture or repair of these products. This catalog is not a contractual offering; it is for informational purposes only.
2
ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601 3
ARRAY CONNECTOR CORPORATION
®
Product Data
Electrical Standard Material and Finishes
Contact Termination
Number of Contacts
Wire Size, AWG
Wire Range Accomodations
Contact Size AWG Wire Size Min. Max.
Contact Size Rated Amps Test current Max. Millivolt Drop
20 7.5 7.5 55
16 13.0 13.0 49
(PWF) Crimp
Shell (Mil-Std)
Aluminum alloy, conductive olive
drab chromate over cadmium
finish per QQ-P-416. (Consult
Factory for Commercial options.)
Shell Styles
00 - Wall mounting receptacle
01 - Cable in line receptacle
02 - Box mounting receptacle
06 - Straight plug
07 - Jam nut receptacle
08 - 90º Angle plug
Contact Rating
Voltage Rating
Altitude Service Rating
Sea Level
70,000 ft.
1
AC(rms)
1500
2300
375
500
DC
2100
3200
535
770
AC(rms)
600
1000
300
DC
850
1400
510
450 740
2
1
2
Test Voltage Max. Working Voltage
3 to 61
16 to 24
Insulation O.D. Limits
Insulator Synthetic Rubber
Synthetic Rubber
-55ºC to +125ºC
Cooper alloy, gold plate per MIL-
G-45204 type II.
Grommet and Seal
Contacts
Temperature Range
E - Grommet seal
F - Grommet seal with strain relief
N - No back end, no termination
hardware
P- Potted
8 thru 24Shell Size
Five keyway/three point bayonet
locking.
Polarization/Coupling
Service
Classes
20 24, 22 and 20 .066 (1.52) .083 (2.11)
16 20, 18 and 16 .066 (1.68) .109 (2.77)
Mechanical
Shell
Size Layout
Position
W
8
10
12
14
3A
33
6
7
3
8
10
5
12
15
18
19
60º
90º
90º
90º
-
-
-
-
-
-
-
-
-
180º
-
-
-
-
-
-
112º 203º 292º
270º 295º
184º 273º
--
155º 234º
180º 270º
315º -
155º
92º
90º
110º
90º
165º
90º
60º
40º
43º
17º
15º
30º
XYZ
Polarization
The diagrams indicate alternate insert positions. The five positions (W, X, Y, Z and Normal) differ in degree of
rotation for various size and layouts. The exact angle of rotation for the combinations are listed in the table below.
Note: for polarization data for the other contact
arragements, consult factory.
Shell
Size Layout
Position
W
16
18
20
22
24
8
23
26
11
32
16
39
41
21
41
55
61
54º
158º
60º
62º
85º
152º
270º
-
119º
180º
-
275º
241º
222º
331º
-
338º
340º
265º
138º
318º 333º 347º
252º 333º
225º -
175º 349º
264º -
226º 314º
270º 324º
144º
126º
135º
135º
142º
180º
238º
63º
45º
16º
39º
30º
90º
XYZ
Engaging Face-
Pin Inserts
Position N
(Normal)
L*TE*O*A
ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601
4
ARRAY CONNECTOR CORPORATION
®
PWF
PWF
MS
06
*6
3126
E
E
E
22-
22-
22-
55
55
55
P
P
P
Y
Y
Y
K001**
SERIES
PREFIX
PWF = ARRAY
MS = MILITARY
SHELL SIZE
00 = wall receptacle
01 = in-line receptacle
02 = box mount receptacle
06 = straight plug
07 = jam nut mount receptacle
08 = 90º plug
SERVICE TYPE (Class)
E = grommet seal
F = same as E with strain relief
P= potting shell
N = no back end, threaded with no cable
termination hardware
POLARIZATION
(See Chart, page 3)
MODIFICATION CODES
A602 = Black Anodize Plating
A610 = Aluminate Plating
A611 = Nickel Plating
A612 = Electroless Nickel Plating
A617 = Tin Plating
F602 = Clinch Nuts
M901 = Stainless Steel Construction
** For modification codes not listed, consult
factory
CONTACT TYPE
P= pins
S = sockets
A= pin less contacts
B = socket less contacts
CONTACT ARRANGEMENT
(See page 5)
SHELL SIZE
0 thru 24 available
Nomenclature Guide
Example #1
#2
#3
*NOTE: When modification to a standard plug or receptacle is required, delete the “0” between the PWF and the “6” as in example #2.
CANNON FCI/BURNDY
PWF05*
PWF04*
~~~~~ PWF08*
Cross Reference
LEADING SUPPLIERS’ COMMERCIAL EQUIVALENT
MIL SPEC
PART NOs. ARRAY AMPHENOL-
BENDIX SOURIAU VEAM
MS3120E*
MS3120F*
MS3120P*
MS3121E*
MS3121F*
MS3121P*
MS3122E*
MS3124E*
MS3124F*
MS3124P*
MS3126E*
MS3126F*
MS3126P*
~~~~~
MS3127E*
MS3128E*
PWF00E*
PWF00F*
PWF00P*
PWF01E*
PWF01F*
PWF01P*
PWF02E*
PWF07E*
PWF07F*
PWF07P*
PWF06E*
PWF06F*
PWF06P*
PWF**N*
No rear accessories (Commercial part numbering only)
PT00SE*
PT00SE*(SR)
PT00SP*
PT01SE*
PT01SE*(SR)
PT01SP*
PT02SE*
PT07SE*
PT07SE*(SR)
PT07SP*
PT06SE*
PT06SE*(SR)
PT06SP*
PT08SE*
PT03/4/5SE*
MF02S*
MF00SE*
L*TF*O*A
L*TP*0*A
L*TE*1*A
L*TF*1*A
L*TP*1*A
L*TE*2*A
L*TE*4*A
L*TF*4*A
L*TP*4*A
L*TE*6*A
L*TF*6*A
L*TP*6*A
L*TE*7*A
L*TE*8*A
VPT00SE*
VPT00SE*(SR)
VPT00SP*
VPT01SE*
VPT01SE*(SR)
VPT01SP*
851-00R*50*
851-00RC*50
851-00RP*50
851-01R*50
851-01RC*50
851-01RP*50
851-02R*50
851-07R*50
851-07RC*50
851-07RP*50
851-06R*50
851-06RC*50
851-06RP*50
851-08RP*50
VPT02SE*
VPT07SE*
VPT07SE*(SR)
VPT07SP*
VPT06SE*
VPT06SE*(SR)
VPT06SP*
VPT08SE*
KPSE00E*
KPSE00F*
KPSE00P*
KPSE01E*
KPSE01F*
KPSE01P*
KPSE02E*
KPSE07E*
KPSE07F*
KPSE07P*
KPSE06E*
KPSE06F*
KPSE07P*
KPSE08*
KPSE03/4/5*
KP27E*
KP28E*
NOTES:
1. Souriau is “commercial only”. Not on QPL.
2. For MS connectors “without contacts”, include “less contacts” after the complete connector MS number. The MS number does not change.
3. Connectors per MS have spare contacts and sealing plugs. Connectors per supplier’s commercial part number do not have these additional parts.
90o Cable Entry Plug (No MS drawing. Do not confuse with MS3128)
Wall Mount, Special Wide Flange (Special)
Box Mount, Special Large Flange (Special)
08
10
18
14
12
16
20
22
24
ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601 5
ARRAY CONNECTOR CORPORATION
®
Contact Arrangement
(Engaging Face of Pin Insert)
** Commercial arrangement.
º MIL-C-26482 Series 1 Contact arrangements, per MIL-STD-1669
(For contact arrangements not shown, contact factory)
3A
10
8.572
.697
.885
1.010
1.135
1.260
1.385
1.510
1.635
.540
.665
.828
.952
1.076
1.201
1.326
1.451
1.576
14.53
17.70
22.45
25.67
28.87
32.00
35.18
38.35
41.50
13.72
16.90
21.03
24.20
27.35
30.75
33.65
36.83
40.00
12
14
16
18
20
22
24
ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601
6
ARRAY CONNECTOR CORPORATION
®
Panel Mounting Data
Series PWF Panel Cutout Dimensions
Front Panel Mounting Rear Panel Mounting
Max Panel & Screw Heads
SHELL
SIZE
8
10
12
14
16
18
20
22
24
PWF00
0.212 0.212
0.087 0.087
PWF02
SHELL
SIZE
INCHES MILLIMETERS
.125±.005 DIA.
FOR SIZES 8 - 22
.155± .005 DIA.
FOR SIZES 24
Wall & Box Mounting
Receptacle 00, 02
Square flange PWF receptacles are
normally front panel mounted, using
dimensions indicated. Hole location “R”
is true position and is located within
.005 dia. of (TP). When back panel
mounting, provision must be made for
bayonet pin and coupling clearance.
Jam Nut Receptacle 07
PWF jam nut receptacles are rear
panel mounted in a “D” shaped mount-
ing hole. Minimum panel thickness is
.062”, maximum is .125” for sizes 8
through 18 and .250” for sizes 20
through 24.
A R A R
10
8.479
.603
.730
.855
.979
1.103
1.223
1.350
1.475
.594
.719
.812
.906
.969
1.062
1.156
1.250
1.375
12.17
15.32
18.54
21.72
24.87
28.02
30.56
33.78
36.96
15.08
18.28
20.61
23.00
24.60
27.00
29.36
31.75
33.98
12
14
16
18
20
22
24
SHELL
SIZE
INCHES MILLIMETERS
A R A R
Note: All dimensions relate to distance in
front of flange required for proper mating.
DIMENSIONS IN INCHES
ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601 7
ARRAY CONNECTOR CORPORATION
®
Series PWF00/MS3120
Wall Mount Receptacle
Application: Wall Mounting Connector.
Note: L* = Total connector length including cable accessory.
SHELL
SIZE
8
10
12
14
16
18
20
22
24
.234
.297
.422
.547
.609
.734
.734
.922
.984
.317
.434
.548
.673
.798
.899
1.024
1.149
1.274
.062
.062
.062
.062
.062
.062
.094
.094
.094
.608 .431
.431
.431
.431
.431
.431
.556
.556
.589
.471
.588
.748
.873
.998
1.123
1.248
1.373
1.498
.828
.954
1.047
1.141
1.234
1.328
1.453
1.578
1.703
.828
.891
1.016
1.141
1.203
1.469
1.469
1.656
1.750
.120
.120
.120
.120
.120
.120
.120
.120
.147
.734
.858
.984
1.110
1.234
1.360
1.484
1.610
Xf
MIN.
Xp
MIN.
K
± .016
Y
MAX.
Yf
MAX.
M
+.031
-.000
A
±.003
S
MAX.
T
±.005
V V THREAD
CLASS 2A
7/16-28 UNEF
9/16-24 UNEF
11/16-24 UNEF
13/16-20 UNEF
15/16-20 UNEF
1 1/16-18 UNEF
1 3/16-18 UNEF
1 5/16-18 UNEF
1 7/16-18 UNEF
DIMENSIONS IN MILLIMETERS
SHELL
SIZE
8
10
12
14
16
18
20
22
24
5.95
7.54
10.72
13.89
15.47
18.64
18.64
23.42
24.99
8.05
11.02
13.92
17.09
20.27
22.83
26.01
29.18
32.26
1.57
1.57
1.57
1.57
1.57
1.57
2.39
2.39
2.39
15.44
18.64
21.79
24.99
28.19
31.34
34.54
37.82
40.89
21.03 10.95
10.95
10.95
10.95
10.95
10.95
14.12
14.12
14.96
11.99
14.94
19.00
22.17
25.35
28.52
31.70
34.27
38.05
21.03
24.23
26.59
28.98
31.34
33.73
36.91
40.08
43.26
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.73
22.63
25.81
28.98
30.56
37.31
37.31
42.06
44.45
Xf
MIN.
Xp
MIN. K
± .406
Y
MAX.
Yf
MAX.
M
+ .787
- .000
A
± .076
S
MAX.
T
± .127
V V THREAD
CLASS 2A
7/16-28 UNEF
9/16-24 UNEF
11/16-24 UNEF
13/16-20 UNEF
15/16-20 UNEF
1 1/16-18 UNEF
1 3/16-18 UNEF
1 5/16-18 UNEF
1 7/16-18 UNEF
CLASS N CLASS E CLASS F CLASS P
.938
ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601
8
ARRAY CONNECTOR CORPORATION
®Series PWF01/MS3121
In-Line Receptacle
DIMENSIONS IN INCHES
Application: Cable-To-Cable Connector (suggested mates are PWF06/MS3126).
Note: L* = Total connector length including cable accessory.
SHELL
SIZE
8
10
12
14
16
18
20
22
24
.234
.297
.422
.547
.609
.734
.734
.922
.984
.317
.434
.548
.673
.798
.899
1.024
1.149
1.274
.094
.094
.094
.094
.094
.094
.115
.115
.115
.608
.734
.858
.984
1.110
1.234
1.360
1.484
1.610
.828 .400
.400
.400
.400
.400
.400
.535
.535
.568
.471
.588
.748
.873
.998
1.123
1.248
1.373
1.498
1.062
1.156
1.250
1.344
1.438
1.562
1.688
1.812
.891
1.016
1.141
1.203
1.469
1.469
1.656
1.750
Xf
MIN.
Xp
MIN.
K
± .010
Y
MAX.
Yf
MAX.
M
+.031
-.000
A
±.003
G
±.020
.828
.954
1.047
1.141
1.234
1.328
1.453
1.578
1.70
S
MAX.
V V THREAD
CLASS 2A
7/16-28 UNEF
9/16-24 UNEF
11/16-24 UNEF
13/16-20 UNEF
15/16-20 UNEF
1 1/16-18 UNEF
1 3/16-18 UNEF
1 5/16-18 UNEF
1 7/16-18 UNEF
DIMENSIONS IN MILLIMETERS
SHELL
SIZE
8
10
12
14
16
18
20
22
24
5.94
7.54
10.72
13.89
15.47
18.64
18.64
23.42
24.99
8.05
11.02
13.92
17.09
20.27
22.83
26.01
29.18
32.26
2.39
2.39
2.39
2.39
2.39
2.39
2.92
2.92
2.92
15.44
18.64
21.79
24.99
28.19
31.34
34.54
37.82
40.89
21.03 10.16
10.16
10.16
10.16
10.16
10.16
13.59
13.59
14.43
11.99
14.94
19.00
22.17
25.35
28.52
31.70
34.27
38.05
21.03
24.23
26.59
28.98
31.34
33.73
36.91
40.08
43.26
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.73
22.63
25.81
28.98
30.56
37.31
37.31
42.06
44.45
Xf
MIN.
Xp
MIN.
K
± .254
Y
MAX.
Yf
MAX.
M
+.787
-.000
A
± .076
S
MAX.
G
± .508
V V THREAD
CLASS 2A
7/16-28 UNEF
9/16-24 UNEF
11/16-24 UNEF
13/16-20 UNEF
15/16-20 UNEF
1 1/16-18 UNEF
1 3/16-18 UNEF
1 5/16-18 UNEF
1 7/16-18 UNEF
CLASS N CLASS F CLASS P CLASS E
1.234
1.328
1.453
1.578
1.703
1.047
1.141
.828
.954
S
MAX.
ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601 9
ARRAY CONNECTOR CORPORATION
®
Application: Box Mount Receptacle.
DIMENSIONS IN INCHES
SHELL
SIZE
8
10
12
14
16
18
20
22
24
.062
.062
.062
.062
.062
.062
.094
.094
.094
.438
.558
.688
.812
.938
1.062
1.188
1.312
1.438
1.320
1.320
1.320
1.320
1.320
1.320
1.367
1.367
1.418
.431
.431
.431
.431
.431
.431
.556
.556
.589
.471 .594
.719
.812
.906
.969
1.062
1.156
1.250
1.375
T
± .005
.120
.120
.120
.120
.120
.120
.120
.120
.147
.588
.748
.873
.998
1.123
1.248
1.373
1.498
K
± .010
N
± .015
L MAX.
M
+.031
-.000
A
±.003
R
(Tp)
31.34
33.73
36.91
40.08
43.26
26.59
28.98
21.03
24.23
S
MAX.
DIMENSIONS IN MILLIMETERS
SHELL
SIZE
8
10
12
14
16
18
20
22
24
1.57
1.57
1.57
1.57
1.57
1.57
2.39
2.39
2.39
11.13
36.53
14.27
17.48
20.62
23.83
26.97
30.18
33.32
33.53
33.53
33.53
33.53
33.53
33.53
34.72
34.72
36.02
10.95
10.95
10.95
10.95
10.95
10.95
14.12
14.12
14.96
12.01 15.09
18.26
20.62
23.01
24.61
26.97
29.36
31.75
34.93
T
± .127
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.05
3.73
14.99
19.05
22.23
25.40
28.58
31.75
34.93
38.10
K
± .254
N
± .381
L MAX.
M
+.787
-.000
A
± .076
R
(Tp)
Series PWF02/MS3122
Box Mount Receptacle
24
Xf
MIN.
.234
.297
.422
.547
.609
.734
.734
.922
.984
PA
±.003
AA
MAX. Z THREAD
S
MAX.
Lp
MAX.
M
+.031
-.000
Lf
MAX.
Le
MAX.
Yp
MAX.
K
±.020
Yf
MAX.
1.141
Xp
MIN.
ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601
10
ARRAY CONNECTOR CORPORATION
®
DIMENSIONS IN INCHES
Application: Jam Nut Mounting with O-ring to D-shaped Chassis Hole. (See panel cutout dimensions on page 6.)
Note: L* = Total connector length including cable accessory.
SHELL
SIZE
8
10
12
14
16
18
20
22
.062
.062
.062
.062
.062
.062
.062
.062
.062
.125
.125
.125
.125
.125
.125
.250
.250
.250
.317
.434
.548
.673
.798
.899
1.024
1.149
1.274
.117
.117
.117
.117
.117
.117
.148
.148
.148
.828
.891
1.016
1.203
1.469
1.469
1.656
1.750
.608 .691
.691
.691
.691
.691
.691
.879
.879
.912
.471
.588
.748
.873
.998
1.123
1.248
1.373
1.498
.767
.892
1.079
1.205
1.329
1.455
1.579
1.705
1.829
.954
1.078
1.266
1.391
1.516
1.641
1.828
1.954
2.078
.734
.858
.984
1.110
1.234
1.360
1.484
1.610
1.547
1.547
1.547
1.547
1.547
1.547
1.709
1.709
1.709
2.422
2.422
2.422
2.422
2.537
2.537
2.824
2.824
2.900
1.675
1.675
1.675
1.675
1.675
1.675
1.963
1.963
2.025
MIN. MAX.
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 UNEF
1 1/4-18 UNEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 5/8-18 UNEF
Series PWF07/MS3124
Jam Nut Receptacle
24
Xf
MIN.
5.94
7.54
10.72
13.89
15.47
18.64
18.64
23.42
24.99
PA
±.076
AA
MAX. Z THREAD
S
MAX.
Lp
MAX.
M
+.787
-.000
Lf
MAX.
Le
MAX.
Yp
MAX.
K
± .508
Yf
MAX.
29.98
Xp
MIN.
DIMENSIONS IN MILLIMETERS
SHELL
SIZE
8
10
12
14
16
18
20
22
1.57
1.57
1.57
1.57
1.57
1.57
1.57
1.57
1.57
3.18
3.18
3.18
3.18
3.18
3.18
6.35
6.35
6.35
8.05
11.02
13.92
17.09
20.27
22.83
26.01
29.18
32.36
2.97
2.97
2.97
2.97
2.97
2.97
3.76
3.76
3.76
21.03
22.63
25.81
30.56
37.31
37.31
42.06
44.45
15.44 17.90
17.90
17.90
17.90
17.90
17.90
22.68
22.68
23.52
11.99
14.94
19.00
22.17
25.35
28.52
31.70
34.87
38.05
19.48
22.66
27.41
30.61
33.76
36.96
40.11
43.31
46.46
24.23
27.38
32.16
35.33
38.51
41.68
46.43
49.63
52.78
18.64
21.79
24.99
28.19
31.34
34.54
39.69
40.89
39.29
39.29
39.29
39.29
39.29
39.29
43.41
43.41
43.41
61.52
61.52
61.52
61.52
64.44
64.44
71.73
71.73
73.66
42.55
42.55
42.55
42.55
42.55
42.55
49.86
49.86
51.44
MIN. MAX.
5/8-24 UNEF
3/4-20 UNEF
7/8-20 UNEF
1-20 UNEF
1 1/8-18 UNEF
1 1/4-18 UNEF
1 3/8-18 UNEF
1 1/2-18 UNEF
1 5/8-18 UNEF
CLASS N CLASS E CLASS F CLASS P
V V THREAD
V V THREAD
ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601 11
ARRAY CONNECTOR CORPORATION
®
DIMENSIONS IN INCHES
Application: Straight Plug Connector, General Cable Coupling.
Note: L* = Total connector length including cable accessory.
SHELL
SIZE
8
10
12
14
16
18
20
22
24
.234
.297
.422
.547
.609
.734
.734
.922
.984
.317
.434
.548
.673
.798
.899
1.024
1.149
1.274
.608
.734
.858
.984
1.110
1.234
1.360
1.484
1.610
.828
.891
1.016
1.141
1.203
1.469
1.469
1.656
1.750
1.513 2.413
2.413
2.413
2.413
2.528
2.528
2.753
2.753
2.830
1.750
1.750
1.750
1.750
1.750
1.750
1.892
1.892
1.892
.782
.926
1.043
1.183
1.305
1.391
1.531
1.656
1.777
1.513
1.513
1.513
1.513
1.513
1.638
1.638
1.638
Xf
MIN.
Xp
MIN.
Y
MAX.
Yf
MAX.
Le
MAX.
Lf
MAX.
Lp
MAX.
Q
MAX.
7/16-28 UNEF
9/16-24 UNEF
11/16-24 UNEF
13/16-20 UNEF
15/16-20 UNEF
1 1/16-18 UNEF
1 3/16-18 UNEF
1 5/16-18 UNEF
1 7/16-18 UNEF
DIMENSIONS IN MILLIMETERS
SHELL
SIZE
8
10
12
14
16
18
20
22
24
5.94
7.54
10.72
13.89
15.47
18.64
18.64
23.42
24.99
8.05
11.02
13.92
17.09
20.27
22.83
26.01
29.18
32.26
15.44
18.64
21.79
24.99
28.19
31.34
34.54
37.82
40.89
21.03
22.63
25.81
28.98
30.56
37.31
37.31
42.06
44.45
38.43 61.29
61.29
61.29
61.29
64.21
64.21
69.93
69.93
71.88
44.45
44.45
44.45
44.45
44.45
44.45
48.06
48.06
49.61
19.86
23.52
26.49
30.05
33.15
35.33
38.89
42.06
45.14
38.43
38.43
38.43
38.43
38.43
41.61
41.61
41.61
Xf
MIN.
Xp
MIN.
Y
MAX.
Yf
MAX.
Le
MAX.
Lf
MAX.
Lp
MAX.
Q
MAX.
7/16-28 UNEF
9/16-24 UNEF
11/16-24 UNEF
13/16-20 UNEF
15/16-20 UNEF
1 1/16-18 UNEF
1 3/16-18 UNEF
1 5/16-18 UNEF
1 7/16-18 UNEF
CLASS N
CLASS E CLASS F CLASS P
Series PWF06/MS3126
Straight Plug
DASH NO.
WITH
CHAIN
L
MAX.
DIMENSIONS IN INCHES
ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601
12
ARRAY CONNECTOR CORPORATION
®
PW80/MS3180 and
PW81/MS3181 Protective Caps
Part No. PW80-** or MS3180-**
**=“Dash Number”
Part No. PW81-** or MS3181-**
**=“Dash Number”
(MS 3180)
(MS 3181)
DASH NO.
SHELL
SIZE
8
10
12
14
16
18
20
22
24
G1
G2
G3
G4
G5
G6
G7
G8
G9
G11
G12
G13
G14
G15
G16
G17
G18
G19
.473
.590
.750
.875
1.000
1.125
1.250
1.375
1.500
.719
.844
1.000
1.125
1.250
1.375
1.500
1.625
1.750
3.00
3.00
3.50
3.50
3.50
3.50
4.00
4.00
4.00
.562
.562
.562
.562
.562
.562
.625
.625
.658
.378
.378
.378
.378
.378
.378
.440
.440
.473
12.01
14.98
19.05
22.21
25.40
28.58
31.75
34.93
38.10
18.28
21.41
25.40
28.58
31.75
34.93
38.10
41.28
44.45
76.20
76.20
88.90
88.90
88.90
88.90
101.60
101.60
101.60
14.27
14.27
14.27
14.27
14.27
14.27
15.87
15.87
16.71
9.60
9.60
9.60
9.60
9.60
9.60
11.17
11.17
12.05
G1
G2
G3
G4
G5
G6
G7
G8
G9
G11
G12
G13
G14
G15
G16
G17
G18
G19
G1
G2
G3
G4
G5
G6
G7
G8
G9
G11
G12
G13
G14
G15
G16
G17
G18
G19
G21
G22
G23
G24
G25
G26
G27
G28
G29
G21
G22
G23
G24
G25
G26
G27
G28
G29
14.27
14.27
14.27
14.27
14.27
14.27
14.27
14.27
15.29
14.68
17.86
22.63
25.80
28.98
32.15
35.33
38.50
41.68
18.26
20.64
25.40
28.58
31.75
34.93
38.10
41.28
44.45
76.20
76.20
88.90
88.90
88.90
88.90
101.60
101.60
101.60
3.00
3.00
3.50
3.50
3.50
3.50
4.00
4.00
4.00
.562
.562
.562
.562
.562
.562
.562
.562
.602
.578
.703
.891
1.016
1.141
1.266
1.391
1.516
1.641
.719
.812
1.000
1.125
1.250
1.375
1.500
1.625
1.750
G1
G2
G3
G4
G5
G6
G7
G8
G9
G11
G12
G13
G14
G15
G16
G17
G18
G19
8
10
12
14
16
18
20
22
24
8
10
12
14
16
18
20
22
24
8
10
12
14
16
18
20
22
24
WITHOUT
CHAIN WITH
CHAIN
A
+.001
-.005
F
MAX.
H
±.25
M
±.010
L
MAX.
DIMENSIONS IN MILLIMETERS
DASH NO.
SHELL
SIZE WITHOUT
CHAIN WITH
CHAIN
A
+.03
-.13
F
MAX.
H
±6.35
M
±.25
N
MIN.
DIMENSIONS IN INCHES
SHELL
SIZE WITHOUT
CHAIN WITH
CHAIN
WITH
CHAIN &
WASHER
HL
MAX.
Q
MAX.
N
MIN.
DIMENSIONS IN MILLIMETERS
SHELL
SIZE WITHOUT
CHAIN
WITH
CHAIN &
WASHER
HL
MAX.
Q
MAX.
DASH NO.
Contact Data
1000 VAC eff.
Test
Class
Contact ratings
20
Contact size
Pin16
Socket 20
Contact size
20 w/support cup
16
20 w/o support cup
16
857-0668-XXX
Socket 20 with wire well support
Service
13 A
ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601 13
ARRAY CONNECTOR CORPORATION
®
Contacts
Crimp contacts
1) Socket and pin with wire well support (size 20 only)
1)
Rated current
Test current
Voltage drop
7.5 A
7.5 A
55 mV
16
13 A
50 mV
Contacts for MS 312_ and PWF Series
Contact size
Socket 16
Pin 20 with wire well support
857-0670-XXX
857-0672-XXX
806-0673-XXX
Pin 20 806-0687-XXX
806-0688-XXX
806-0673-XXX
857-0668-XXX
806-0688-XXX
857-0672-XXX
806-0687-XXX
857-0670-XXX
M39029/31-240 M22520/1-01 +
M22520/2-01 + MS24256A20
MS24256A20
MS24256A16
MS24256A16
MS24256A20
MS24256A20
Insertion Tool
MS24256R20
MS24256R20
MS24256R16
MS24256R16
MS24256R20
MS24256R20
Removal Tool
M22520/2-02
-----
-----
M22520/2-01 +
M22520/2-02
M39029/32-259
M39029/31-228
M39029/32-247
M39029/31-223
M39029/32-242
20 w/support cup
Array P/N MS P/N Handcrimping tool
P
S
P
S
P
S
M22520/1-02
20 w/o support cup
1450 VDC
Ratings (sea level)
I
600 VAC eff.
850 VDC
1500 VAC eff.
II
2300 VAC eff.
Contact
Material
Copper alloy - Gold plate over nickel
MS 312_ and PWF_ connectors are normally supplied with size 20 contacts with wire well support.
All crimp contacts can be crimped, inserted and removed with commercially available appropriate tooling.
ARRAY CONNECTOR CORPORATION • 12555 S.W. 130th St. • Miami, FL 33186 • Ph: (305) 234-1000 • Fax: (305) 234-6601
14
ARRAY CONNECTOR CORPORATION
®
Crimping Instructions
Cut wire to length and strip 1/4 inch of insulation
from end for use with size 16 contacts. Strip 3/16
inch from end for use with size 20 contacts. Hot
wire stripping is recommended. Avoid nicking
individual strands if other methods are used.
Insert and bottom wire in contact. Insulation must
extend into insulation wire well support. Check to
make certain strands are visible in the inspection
hole provided.
Insert wired contact into crimping tool, previously
arranged; see table on page 13.
Close tool handles to the full extent of their travel;
release pressure on handles and remove the
complete crimped contact/wire assembly. The
tool will automatically position for the next
crimping cycle.
Apneumatic crimping tool provided with magazine for
large capacity production is available on specialized
market.