1
Rectifier Device Data
Lead mounted standard recovery rectifiers are designed for use in power supplies
and other applications having need of a device with the following features:
•High Current to Small Size
•High Surge Current Capability
•Low Forward Voltage Drop
•Void–Free Economical Plastic Package
•Available in Volume Quantities
Mechanical Characteristics
•Case: Epoxy, Molded
•Weight: 1.1 gram (approximately)
•Finish: All External Surfaces Corrosion Resistant and Terminal Leads are
Readily Solderable
•Lead and Mounting Surface Temperature for Soldering Purposes:
220°C Max. for 10 Seconds, 1/16″ from case
•Shipped in plastic bags, 5,000 per bag.
•Available Tape and Reeled, 1500 per reel, by adding a “RL” suffix to the
part number
•Polarity: Cathode Indicated by Polarity Band
•Marking: 1N5400, 1N5401, 1N5402, 1N5404, 1N5406, 1N5407, 1N5408
MAXIMUM RATINGS
Rating Symbol 1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
50 100 200 400 600 800 1000 Volts
Non–repetitive Peak Reverse Voltage VRSM 100 200 300 525 800 1000 1200 Volts
Average Rectified Forward Current
(Single Phase Resistive Load,
1/2″ Leads, TL = 105°C)
IO3.0 Amp
Non–repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions) IFSM 200 (one cycle) Amp
Operating and Storage Junction
Temperature Range TJ
Tstg – 65 to +170
– 65 to +175 °C
THERMAL CHARACTERISTICS
Characteristic Symbol Typ Unit
Thermal Resistance, Junction to Ambient (PC Board Mount, 1/2″ Leads) RθJA 53 °C/W
ELECTRICAL CHARACTERISTICS
Characteristic Symbol Min Typ Max Unit
*Instantaneous Forward Voltage (1)
(iF = 9.4 Amp) vF— — 1.2 Volts
Average Reverse Current (1)
DC Reverse Current (Rated dc Voltage, TL = 80°C) IR(AV)
IR—
——
—500
500 µA
*JEDEC Registered Data.
(1) Measured in a single phase halfwave circuit such as shown in Figure 6.25 of EIA RS–282, November 1963. Operated at rated load conditions
TL = 80°C, IO = 3.0 A, Vr = VRWM.
Preferred devices are Motorola recommended choices for future use and best overall value.
Ratings at 25°C ambient temperature unless otherwise specified.
60 Hz resistive or inductive loads.
For capacitive load, derate current by 20%.
Motorola, Inc. 1996
Order this document
by 1N5400/D
SEMICONDUCTOR TECHNICAL DATA
STANDARD
RECOVERY RECTIFIERS
50–1000 VOLTS
3.0 AMPERE
CASE 267–03
1N5404 and 1N5406 are
Motorola Preferred Devices
Rev 2
2Rectifier Device Data
PACKAGE DIMENSIONS
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
STYLE 1:
PIN 1. CATHODE
2. ANODE
1
2
K
A
K
D
B
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.370 0.380 9.40 9.65
B0.190 0.210 4.83 5.33
D0.048 0.052 1.22 1.32
K1.000 ––– 25.40 –––
CASE 267–03
ISSUE C
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Af firmative Action Employer.
Mfax is a trademark of Motorola, Inc.
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center,
P.O. Box 5405, Denver , Colorado 80217. 303–675–2140 or 1–800–441–2447 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 81–3–3521–8315
Mfax: RMFAX0@email.sps.mot.com – TOUCHTONE 602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
– US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
INTERNET: http://motorola.com/sps
1N5400/D
◊
