GBPC6005 thru GBPC610
Document Number 88613
08-Jul-05
Vishay General Semiconductor
www.vishay.com
1
Case Style GBPC6
~
~
~
~
Glass Passivated Single-Phase Bridge Rectifier
Major Ratings and Characteristics
IF(AV) 6 A
VRRM 50 V to 1000 V
IFSM 175 A
IR5 µA
VF1.0 V
Tj max. 150 °C
Features
• UL Recognition file number E54214
• Ideal for printed circuit boards
• Typical IR less than 0.5 µA
• High surge current capability
• High case dielectric strength 1500 VRMS
• Solder Dip 260 °C, 40 seconds
Typical Applications
General purpose use in ac-to-dc bridge full wave rec-
tification for Power Supply, Home Appliances, Office
Equipment, Industrial Automation applications
Mechanical Data
Case: GBPC6
Epoxy meets UL-94V-0 Flammability rating
Terminals: Silver plated (E4 Suffix) leads, solderable
per J-STD-002B and JESD22-B102D
Polarity: As marked, Positive lead by belevled corner
Mounting Torque: 10 cm-kg (8.8 inches-lbs) max.
Recommended Torque: 5.7 cm-kg (5 inches-lbs)
Maximum Ratings
Ratings at 25 °C ambient temperature unless otherwise specified.
Parameter Symbols GBPC
6005
GBPC
601
GBPC
602
GBPC
604
GBPC
606
GBPC
608
GBPC
610
Unit
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS bridge input voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward TC = 50 °C (1)(2)
rectified output current at TA = 40 °C (3)
IF(AV) 6.0
3.0
A
Peak forward surge current single sine-wave
superimposed on rated load
IFSM 175 A
Rating for fusing (t < 8.3 ms) I2t127 A2sec
Operating junction and storage temperature
range
TJ, TSTG - 55 to + 150 °C
www.vishay.com
2
Document Number 88613
08-Jul-05
GBPC6005 thru GBPC610
Vishay General Semiconductor
Electrical Characteristics
Ratings at 25 °C ambient temperature unless otherwise specified.
Thermal Characteristics
Ratings at 25 °C ambient temperature unless otherwise specified.
Notes:
(1) Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with #6 screw
(2) Unit mounted on 5.5 x 6.0 x 0.11" thick (14 x 15 x 0.3 cm) Al. Plate
(3) Unit mounted on P.C.B. at 0.375" (9.5 mm) lead length with 0.5 x 0.5" (12 x 12 mm) copper pads
Ratings and Characteristics Curves
(TA = 25 °C unless otherwise noted)
Parameter Test condition Symbols GBPC
6005
GBPC
601
GBPC
602
GBPC
604
GBPC
606
GBPC
608
GBPC
610
Unit
Maximum instantaneous
forward voltage drop per leg
at 3.0 A VF 1.0 V
Maximum DC reverse
current at rated DC blocking
voltage per leg
TA = 25 °C
TA = 125 °C
IR 5.0
500
µA
Typical junction capacitance
per leg
at 4.0 V, 1 MHz CJ186 90 pF
Parameter Symbols GBPC
6005
GBPC
601
GBPC
602
GBPC
604
GBPC
606
GBPC
608
GBPC
610
Unit
Typical thermal resistance per leg(1) RθJA
RθJC
22
7.3
°C/W
Figure 1. Derating Curve Output Rectified Current
Temperature (°C)
Average Forward Output Current (A)
050 100 150
0
2.0
4.0
6.0
8.0
Case Temperature,
T
C
Heatsink Mounting
5.5 x 6.0 x 0.11" Thk
(14 x 15 x 0.3 cm)
AL. Plate
60 H
Z
Resistive or
Inductive Load
Ambient Temperature, T
A
P.C.B. Mounting
0.375" (9.5 mm) Lead Length
Figure 2. Maximum Non-Repetitive Peak Forward Surge Current
Per Leg
Number of Cycles at 60 H
Z
Peak Forward Surge Current (A)
110 100
50
75
100
125
150
175
200
1.0 Cycle
T
J
=T
J max.
Single Half Sine-Wave
GBPC6005 thru GBPC610
Document Number 88613
08-Jul-05
Vishay General Semiconductor
www.vishay.com
3
Package outline dimensions in inches (millimeters)
Figure 3. Typical Forward Characteristics Per Leg
Figure 4. Typical Reverse Leakage Characteristics Per Leg
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
10
0.4 1.0 1.8
0.01
0.1
1
100
0.6 0.8 1.2 1.6
1.4
T
J
=25°C
Pulse Width = 300 µs
1% Duty Cycle
Percent of Rated Peak Reverse Voltage (%)
Instantaneous Reverse Current (µA)
020 40 60 80 100
0.1
1
10
100
T
A
= 125°C
T
J
=25°C
T
J
= 100°C
Figure 5. Typical Junction Capacitance Per Leg
Figure 6. Typical Transient Thermal Impedance Per Leg
Reverse Voltage (V)
Junction Capacitance, pF
0.1 110 100
10
100
1,000
50 - 400 V
600 - 1000 V
TJ=25 °C
f = 1.0 MH
Z
Vsig = 50mVp-p
t, Heating Time (sec.)
Transient Thermal Impedance (°C/W)
0.01 0.1 110 100
0.1
1
10
100
HOLE FOR
#6 SCREW
0.158 (4.01)
0.142 (3.61)
DIA.
0.128 (3.25)
0.048 (1.22)
0.200 (5.08)
0.160 (4.06)
0.750
(19.05)
MIN.
0.040 (1.02) TYP.
0.094 (2.4) x 45 degrees
0.445 (11.30)
0.405 (10.29)
0.630 (16.00)
0.590 (14.98)
AC
AC
Polarity shown on side of case: Positive lead by beveled corner
0.445 (11.30)
0.405 (10.29)
0.630 (16.00)
0.590 (14.98)
DIA.
0.042(1.07)
0.038(0.96)
Case Style GBPC6
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
