44
www.johansontechnology.com
45
www.johansontechnology.comwww.johansontechnology.com
DIELECTRIC CHARACTERISTICS
SLC MICROWAVE / MILLIMETERWAVE CAPACITORS
KEY FEATURES
• Ceramic SLC Low Profile Devices Exhibit Very
High-Q / Low Insertion Loss, SRFs to 50 GHz
• Thin Film Gold Electrodes Provide Superior Wire
Bonding & Die Attach Performance
• Four SLC Device Types to Fit Many Applications:
Standard (Die) SLCs Border SLCs
Bar SLC Arrays Custom SLC Products
APPLICATIONS
• Microwave Integrated Components
• GaAs Integrated Circuits
• RF/Microwave Components
• DC Block, Bypass, Tuning
DIELECTRIC TEMPERATURE TEMPERATURE DISSIPATION INSULATION TEST AVAILABLE
CODE CONSTANT (K) COEFFICIENT RANGE FACTOR / FREQ. RESISTANCE COND. TOLERANCES
C 23 0 ± 30 ppm -55°C to +125°C < 0.15%/1MHz > 1000 GΩ 1 B,C,D ( A, <2pF)
K 37 0 ± 30 ppm -55°C to +125°C < 0.15%/1MHz > 1000 GΩ 1 B,C,D ( A, <2pF)
N 80 0 ± 30 ppm -55°C to +125°C < 0.15%/1MHz > 1000 GΩ 1 B,C,D ( A, <2pF)
(F - K, >10 pF)
U 120 -750 ± 120 ppm -55°C to +125°C < 0.25%/1MHz > 1000 GΩ 1 J,K (B-D)
V 160 -1500 ± 300 ppm -55°C to +125°C < 0.25%/1MHz > 1000 GΩ 1 J,K (B-D)
R 280 -2200 ± 500 ppm -55°C to +125°C < 0.25%/1MHz > 1000 GΩ 1 J,K (B-D)
L 350 -3300 ± 500 ppm -55°C to +125°C < 1.50%/1MHz > 1000 GΩ 1 J,K,M (B-D)
D 600 ± 10% -55°C to +125°C < 2.50%/1KHz > 100 GΩ 2 K,M
B 1200 ± 10% -55°C to +125°C < 2.50%/1KHz > 100 GΩ 2 K,M
W 2000 ± 10% -55°C to +125°C < 2.50%/1KHz > 100 GΩ 2 K,M
X 2700 ± 10% -55°C to +125°C < 2.50%/1KHz > 100 GΩ 2 K,M
T 4000 ± 15% -55°C to +125°C < 2.50%/1KHz > 100 GΩ 2 K,M
Z 8000 +22% -56% +10°C to +85°C < 4.00%/1KHz > 10 GΩ 2 M,Z
Y 12000 +22% -82% -30°C to +85°C < 4.00%/1KHz > 10 GΩ 2 M,Z
VOLTAGE RATINGS:
50 &100 WVDC
DIELECTRIC STRENGTH:
2.5 x WVDC min, 25°C, 50 mA max
TEST CONDITIONS:
1) All Values: 1.0±0.2 VRMS @1MHZ, 25°C
2) Values ≤100pF: Cond.1; Values >100pF: 1.0±0.2 VRMS @1KHZ, 25°C
46
www.johansontechnology.com
47
www.johansontechnology.comwww.johansontechnology.com
Recessed SLC electrode borders help prevent shorting from conductive epoxy squeeze-up and aid visual
recognition equipment. The V-Series SLCs feature dual borders (top & bottom) while the B-Series SLCs feature
a single border (top-only.)
V-SERIES & B-SERIES CAPACITANCE SELECTION
V-SERIES & B-SERIES BORDER SLC CAPACITORS
V-SERIES & B-SERIES MECHANICAL CHARACTERISTICS
SIZE V10 V12 V15 V20 V25 V30 V40 V50
W&L ±.001” .010 .012 .015 .020 .025 .030 .040 .050
(mm) (0.25) (0.30) (0.38) (0.51) (0.64) (0.76) (1.02) (1.27)
w’ NOM. .008 .010 .011 .016 .020 .026 .036 .044
(mm) (0.20) (0.25) (0.28) (0.41) (0.51) (0.66) (0.91) (1.12)
B ±.001” .001* .001* .002 .002 .002 .002 .002 .003
(mm) (0.025)* (0.025)* (0.051) (0.051) (0.051) (0.051) (0.051) (0.076)
T ±.001” .006 .006 .006 .006 .006 .006 .006 .006
(mm) (0.15) (0.15) (0.15) (0.15) (0.15) (0.15) (0.15) (0.15)
*Min Border 0.0005” Contact factory for other sizes, values or configurations
CAP. V10 V12 V15 V20 V25 V30 V40 V50
CODE VALUE 100V 100V 100V 100V 100V 100V 100V 100V
0R1 0.1 pF C C C
0R2 0.2 pF N K C C
0R3 0.3 pF N N K C C
0R4 0.4 pF V N N K C
0R5 0.5 pF V N N K C C
0R6 0.6 pF V V N K K C
0R7 0.7 pF V V V N K C
0R8 0.8 pF R V V N K C
0R9 0.9 pF R V V N K C C
1R0 1.0 pF R V V N K K C
1R1 1.1 pF R R V N N K C
1R2 1.2 pF L R V N N K C
1R3 1.3 pF L R R N N K C
1R4 1.4 pF L R R N N K C C
1R5 1.5 pF L R R V N K C C
1R6 1.6 pF D R R V N K K C
1R7 1.7 pF D R R V N K K C
1R8 1.8 pF D L R V N K K C
1R9 1.9 pF D L L V N N K C
2R0 2.0 pF D L L V N N K C
2R1 2.1 pF D L L V N N K C
2R2 2.2 pF D L L V V N K C
2R4 2.4 pF D L L V V N K K
2R7 2.7 pF D D L V V N K K
3R0 3.0 pF B D D L V N K K
3R3 3.3 pF B D D L V N N K
3R6 3.6 pF B D D L V N N K
3R9 3.9 pF B D D L V V N K
4R3 4.3 pF B D D L R V N K
4R7 4.7 pF B B D L R V N K
5R1 5.1 pF B B D L R V N K
5R6 5.6 pF B B B L R V N N
6R2 6.2 pF W B B D R V V N
6R8 6.8 pF W B B D R V V N
CAP. V10 V12 V15 V20 V25 V30 V40 V50
CODE VALUE 100V 100V 100V 100V 100V 100V 100V 100V
6R8 6.8 pF W B B D R V V N
7R5 7.5 pF W B B D L R V N
8R2 8.2 pF W W B D L R V N
9R1 9.1 pF W W B D D R V N
100 10 pF X W W D D L V V
120 12 pF X W W B D L R V
150 15 pF T X W B D L R V
180 18 pF T X X B D D R R
200 20 pF T T X B B D L R
220 22 pF Z T X B B D L R
270 27 pF Z T T W B D D L
330 33 pF Y Z T W B B D L
390 39 pF Y Z Z X W B D L
470 47 pF Y Z Z X W B D D
500 50 pF Y Y Z X W B D D
510 51 pF Y Y Z T X B D D
560 56 pF Y Y Z T X B B D
680 68 pF Y Y T X W B D
820 82 pF Y Y Z T W B D
101 100 pF Y Z T X W B
121 120 pF Z T X W B
151 150 pF Y Z T X W
181 180 pF Y Z T T W
201 200 pF Y Z T T X
221 220 pF Y Y Z T X
271 270 pF Y Z T X
331 330 pF Y Y Z T
391 390 pF Y Z T
471 470 pF Y Z T
561 560 pF Y Y Z
681 680 pF Y Z
821 820 pF Y
102 1000 pF Y
122 1200 pF Y
Color breaks used to highlight changes in dielectric material, letters indicate the specific material.
T
W
L
w’
B
Top View Side View Style V
T
w’
Side View Style B
46
www.johansontechnology.com
47
www.johansontechnology.comwww.johansontechnology.com
U-SERIES STANDARD SINGLE LAYER CAPACITORS
T
W
L
Top View
Side View Style U
Color breaks used to highlight changes in dielectric material, letters indicate the specific material
SIZE U10 U12 U15 U20 U25 U30 U35 U50 U70 U90
W +.001” .010 .012 .015 .020 .025 .030 .035 .050 .070 .090
(mm) -.003” (0.25) (0.30) (0.38) (0.51) (0.64) (0.76) (0.89) (1.27) (1.78) (2.29)
L MAX. .010 .015 .020 .020 .030 .030 .040 .060 .080 .100
(mm) (0.25) (0.38) (0.51) (0.51) (0.76) (0.76) (1.02) (1.52) (2.03) (2.54)
T(50V) ±.001” .004 .004 .004 .004 .004 .004 .004 .004 .004 .004
(mm) (0.10) (0.10) (0.10) (0.10) (0.10) (0.10) (0.10) (0.10) (0.10) (0.10)
T(100V) ±.001” .006 .006 .006 .006 .006 .006 .006 .006 .006 .006
(mm) (0.15) (0.15) (0.15) (0.15) (0.15) (0.15) (0.15) (0.15) (0.15) (0.15)
Contact factory for other sizes, values or configurations
CAPACITANCE
U10 U12 U15 U20 U25 U30 U35 U50 U70 U90
CAPACITANCE
CODE VALUE
50V 50V 50V 100 V 50V 100 V 50V 100 V 50V 100 V 50V 100V 100V 100V 100V
CODE VALUE
0R1 0.1 pF C 0R1 0.1 pF
0R2 0.2 pF K C C 0R2 0.2 pF
0R3 0.3 pF N K C K C 0R3 0.3 pF
0R4 0.4 pF N N K K C C C 0R4 0.4 pF
0R5 0.5 pF U N K N C K C 0R5 0.5 pF
0R6 0.6 pF V N K N C K C C C 0R6 0.6 pF
0R7 0.7 pF V N N N K K C K C C 0R7 0.7 pF
0R8 0.8 pF V U N N K N C K C C 0R8 0.8 pF
0R9 0.9 pF R V N U K N C K C C C 0R9 0.9 pF
1R0 1.0 pF R V N U K N K K C K C C 1R0 1.0 pF
1R1 1.1 pF R V N V K N K K C K C C C 1R1 1.1 pF
1R2 1.2 pF R V N V N N K N C K C C C 1R2 1.2 pF
1R3 1.3 pF R V N V N N K N C K C K C 1R3 1.3 pF
1R4 1.4 pF L V U V N N K N K K C K C 1R4 1.4 pF
1R5 1.5 pF L V U V N N K N K K C K C 1R5 1.5 pF
1R6 1.6 pF L R U V N U K N K N C K C 1R6 1.6 pF
1R7 1.7 pF L R U V N U K N K N C K C 1R7 1.7 pF
1R8 1.8 pF L R U R N U N N K N K K C 1R8 1.8 pF
1R9 1.9 pF L R V R N U N N K N K K C 1R9 1.9 pF
2R0 2.0 pF D R V R N U N N K N K K K 2R0 2.0 pF
2R1 2.1 pF D L V R N V N N K N K K K C 2R1 2.1 pF
2R2 2.2 pF D L V R U V N U K N K N K C 2R2 2.2 pF
2R4 2.4 pF D L V R U V N U K N K N K C 2R4 2.4 pF
2R7 2.7 pF D L R L U V N U N N K N K C C 2R7 2.7 pF
3R0 3.0 pF D L R L U V N U N N K N K C C 3R0 3.0 pF
3R3 3.3 pF D L R L V R N V N U K N K C C 3R3 3.3 pF
3R6 3.6 pF D D R L V R U V N U K N K C C 3R6 3.6 pF
3R9 3.9 pF B D R L V R U V N U N N N C C 3R9 3.9 pF
4R3 4.3 pF B D R D V R U V N V N N N C C 4R3 4.3 pF
4R7 4.7 pF B D L D R R U R N V N N N K C 4R7 4.7 pF
5R1 5.1 pF B D L D R R V R U V N U N K C 5R1 5.1 pF
5R6 5.6 pF B D L D R L V R U V N U N K K 5R6 5.6 pF
6R2 6.2 pF B D D D R L V R U V N V N K K 6R2 6.2 pF
6R8 6.8 pF B B D D R L R R V R N V N K K 6R8 6.8 pF
7R5 7.5 pF W B D D R D R L V R U V N K K 7R5 7.5 pF
8R2 8.2 pF W B D B L D R L V R U V N N K 8R2 8.2 pF
9R1 9.1 pF W B D B L D R L V R U R N N N 9R1 9.1 pF
100 10 pF X B D B L D R L R L V R V N N 100 10 pF
T
W
L
Top View
Side View Style U
48
www.johansontechnology.com
49
www.johansontechnology.comwww.johansontechnology.com
U SERIES SLC CAPACITANCE SELECTION (CONT.)
HOW TO ORDER U, V, & B SERIES
MARKING
4 = No marking
Available
CHIP STYLE
U = Standard SLC
B = Single Border SLC
V = Dual Border SLC
VOLTAGE
CODE
500 = 50 V
101 = 100 V
500
CASE SIZE
See
Mechanical
Characteristics
15
CAPACITANCE
1st two digits are
significant; third digit
denotes number of
zeros, R denotes
decimal point.
R05 = .05 pF
2R0 = 2.0 pF
210 = 21 pF
101 = 100 pF
1R0
TOLERANCE
**A = ±0.05 pF
*B = ±0.10 pF
*C = ± 0.25 pF
*D = ±0.50 pF
F = ±1%
G = ± 2%
J = ± 5%
K = ± 10%
M= ± 20%
*Values < 10 pF
**Values ≤ 2 pF
B
TERMINATION
N = TiW/Ni/Au
T = Tiw/Au
T 4
DIELECTRIC
See
Dielectric
Selection
NU
PACKAGING
S = Vial Pack / Bulk
W = Conductive
Waffle Trays
Consult factory for
special packaging or
quantity per package
requests.
W
Color breaks used to highlight changes in dielectric material, letters indicate the specific material
NOTE: The “U” series thick-film terminated SLC’s are fully supported and orders may be placed using legacy part numbers.
These parts are identified by alpha case size code and contain termination codes “G” or “9” i.e. 500UDDB200JG4W.
CAPACITANCE
U10 U12 U15 U20 U25 U30 U35 U50 U70 U90
CAPACITANCE
CODE VALUE
50V 50V 50V 100 V 50V 100 V 50V 100 V 50V 100 V 50V 100V 100V 100V 100V
CODE VALUE
100 10 pF X B D B L D R L R L V R V N N 100 10 pF
120 12 pF X W B B D D L D R L V R V N N 120 12 pF
150 15 pF T W B W D B L D R L R L V N N 150 15 pF
180 18 pF T W B W D B D D L D R L V V N 180 18 pF
200 20 pF T X W W D B D D L D R D R V N 200 20 pF
220 22 pF T X W X B B D B L D R D R V N 220 22 pF
270 27 pF Z T W X B W D B D D L D R V U 270 27 pF
330 33 pF Z T X T B W B B D B L D L R U 330 33 pF
390 39 pF Z T X T W X B W D B D B L R V 390 39 pF
470 47 pF Y Z T T W X B W D B D B D R V 470 47 pF
500 50 pF Y Z T Z W X B W B B D B D R V 500 50 pF
510 51 pF Y Z T Z W X B W B B D B D R R 510 51 pF
560 56 pF Y Z T Z X T B X B W D B D R R 560 56 pF
680 68 pF Z Z Z X T W X B W B W D L R 680 68 pF
820 82 pF Y Z Y T Z W T B X B X B D R 820 82 pF
101 100 pF Y Z Y T Z X T W X B X B D L 101 100 pF
121 120 pF Y Y T Z T T W T W X B D D 121 120 pF
151 150 pF Y Z Y T Z X T W X B B D 151 150 pF
181 180 pF Y Z Y T Z T T W T W B D 181 180 pF
201 200 pF Z Y Z Z T Z X T W B B 201 200 pF
221 220 pF Y Y Z Z T Z X T W B B 221 220 pF
271 270 pF Y Z Y T Z T Z X W B 271 270 pF
331 330 pF Y Y Y Z Z T Z X W W 331 330 pF
391 390 pF Y Z Y T Z T X W 391 390 pF
471 470 pF Y Z Y Z Y T X W 471 470 pF
561 560 pF Y Y Z Y T T X 561 560 pF
681 680 pF Y Z Y Z T X 681 680 pF
821 820 pF Y Z T X 821 820 pF
102 1000 pF Y Z T T 102 1000 pF
122 1200 pF Y Z T 122 1200 pF
152 1500 pF Y Y Z 152 1500 pF
182 1800 pF Y Z 182 1800 pF
202 2000 pF Y Z 202 2000 pF
252 2500 pF Y Y 252 2500 pF
402 4000 pF Y 402 4000 pF
48
www.johansontechnology.com
49
www.johansontechnology.comwww.johansontechnology.com
SLC TEMPERATURE CHARACTERISTICS
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
50
www.johansontechnology.com
51
www.johansontechnology.comwww.johansontechnology.com
METALIZATION TYPE
TiW/Au (Titanium-Tungsten/Gold) TiW/Ni/Au (Titanium-Tungsten/Nickel/Gold)
TERMINATION CODE
T N
ATTACHMENT
Wire / Ribbon Bonding Pb/Sn or Au/Sn Soldering
COMPATIBILITY
Silver or Gold Conductive Epoxy Au/Sn Eutectic Preform
Au/Ge or Au/Si Eutectic Preform Moderate High Temp. Resistance (325°C)
Excellent High Temperature Long term high temperature may cause Ni
Resistance (400°C) diffusion and wire bond problems on Au/Ge
Unsuitable for Pb/Sn or Au/Sn Soldering
SLC thick-film terminations ( legacy codes “G” and “9”) are still supported. Contact the factory for compatibility information.
BOND STRENGTH:
Exceeds MIL-S-883, Meth. 2011
SHEAR STRENGTH:
Exceeds MIL-S-883, Meth. 2019
SOLDER HEAT RESISTANCE:
MIL-S-202, Meth. 210-C, (260±5°C, 5 sec.)
SOLDERABILITY:
MIL-S-202, Meth. 208, (245±5°C, 5 sec.)
SHOCK:
MIL-S-202, Meth. 213-I, (100g, 6 msec.)
THERMAL SHOCK:
MIL-S-202, Meth. 107, A, (-55 to +125°C)
VIBRATION:
MIL-S-202, Meth. 204-G, (30g, 10-2000 Hz)
BURN-IN/LIFE TEST:
MIL-S-202, Meth. 108, A/F
LOW VOLTAGE HUMIDITY:
Mil-C-49464, Para. 3.17
BAROMETRIC PRESSURE:
MIL-S-202, Meth. 105, B
IMMERSION/SALT SPRAY:
MIL-S-202, Meth. 104, B
MOISTURE RESISTANCE:
MIL-S-202, Meth. 106
ENVIRONMENTAL CHARACTERISTICS
METALIZATION CHARACTERISTICS
�
�
SLC TEMPERATURE CHARACTERISTICS
