Aluminum Electrolytic Capacitors RGA RGA Series Features 105, 2,000 hours assured 105 standard series for general purposes RoHS Compliance If there is any requirement on ESR, it's suggested to use low ESR series instead of RGA. Please consult us for any inquiry. Sleeve & Marking Color: Black & White Specifications Performance Items Category Temperature Range 6.3~400V -40 ~ +105 450V -25 ~ +105 20% Capacitance Tolerance Rated voltage Time Leakage Current (at 20) (at 120Hz, 20) 100V 100V after 2 minutes after 5 minutes CV 1,000 I = 0.01CV or 3 (A) CV 1,000 Leakage Current whichever is greater I = 0.03CV + 15(A) I = 0.02CV + 25(A) Where, C = rated capacitance in F V = rated DC working voltage in V Rated Voltage Tan (max) Tan (at 120 Hz, 20) 6.3 10 16 25 35 50 63 100 160 200 250 350 400 0.23 0.20 0.16 0.14 0.12 0.10 0.09 0.08 0.12 0.14 0.17 0.20 0.25 When the capacitance exceeds 1,000F, 0.02 shall be added every 1,000F increase. Rated Voltage Z(-25) Impedance /Z(+20) Ratio Z(-40) /Z(+20) Low Temperature Characteristics (at 120Hz) 450 0.25 Impedance ratio shall not exceed the values given in the table below. 6.3 10 16 25 35 50 63 100 160 200 250 350 400 450 D16 4 3 3 2 2 2 2 2 3 6 8 12 14 16 D16 6 4 4 3 3 3 3 3 D16 8 6 6 4 4 3 3 3 4 8 10 16 18 D16 12 10 8 8 8 8 6 6 Test Time 2,000 Hrs Capacitance Change Within 20% of initial value Tan Less than 200% of specified value Leakage Current Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage applied with rated ripple current for 2,000 hours at 105. Endurance Test Time 1,000 Hrs Capacitance Change With in 20% of initial value Tan Less than 200% of specified value Leakage Current Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. The rated voltage shall be applied to the capacitors before the measurements for 160 ~ 450V (Refer to JIS C 5101-4 4.1). Shelf Life Test Freq. (Hz) Ripple Current & Frequency Multipliers Cap. (F) 60 (50) 120 500 1k 10k up 0.70 0.75 0.80 1.00 1.00 1.00 1.30 1.20 1.10 1.40 1.30 1.12 1.50 1.35 1.15 Under 100 100 C 1,000 1,000 up above Diagram of Dimensions L+ max Lead Spacing and Diameter D+max d Vent6.3 5 6.3 8 10 12.5 16 18 22 25 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 10 12.5 15 min P0.5 d Sleeve 4 min 0.5 0.6 80 15 min 4 min P0.5 Sleeve D+max d L+ max 0.8 L<20: 1.5, L20: 2.0 The case size of 12.5x16, 16x16, 16x20, 18x16, 18x20 and 18x25 are suitable for below diagram: Vent Unit: mm D All product specifications in the catalog are subject to change without notice. (CAT. 2014E1) 0.5 1.0 2.0 Aluminum Electrolytic Capacitors RGA Dimension: D x L(mm) Ripple Current: mA/rms at 120 Hz, 105 Dimension & Permissible Ripple Current V. DC 6.3V (0J) Contents DxL 16V (1C) 5x11 mA 3.3 3R3 30 5x11 30 5x11 4.7 31 4R7 5x11 33 5x11 36 10 100 5x11 50 22 220 5x11 78 6.3x11 86 33 330 470 100 130 141 54 93 99 130 47 6.3x11 6.3x11 8x11.5 6.3x11 6.3x11 8x11.5 8x11.5 10x12.5 165 10x20 12.5x16 12.5x25 16x16 265 290 440 420 220 221 5x11 5x11 682 10,000 103 15,000 153 22,000 223 33,000 333 V. DC F 1 235 190 8x11.5 236 8x11.5 270 10x12.5 300 10x16 335 310 335 10x20 12.5x16 12.5x20 16x16 510 460 640 665 16x25 620 16x31.5 18x25 715 745 16x25 930 18x40 1,275 18x40 2,280 25x45 2,400 22x40 2,510 25x40 3,000 8x11.5 310 10x12.5 8x11.5 380 10x12.5 460 10x16 560 10x20 12.5x16 10x16 690 10x20 760 12.5x16 780 12.5x25 222 6,800 10x12.5 290 2,200 120 188 8x11.5 102 90 6.3x11 8x11.5 230 1,000 5x11 90 150 270 6.3x11 75 5x11 6.3x11 8x11.5 471 472 6.3x11 5x11 142 200 470 4,700 175 97 10x20 12.5x16 12.5x20 16x16 12.5x25 16x20 10x12.5 350 10x16 410 10x20 530 12.5x16 425 680 12.5x20 810 12.5x25 950 590 16x16 720 16x20 830 16x25 1,260 16x35.5 1,470 1,110 18x20 1,110 18x31.5 1,520 1,440 16x31.5 1,420 18x35.5 1,770 1,220 18x25 1,570 1,650 18x35.5 1,900 22x40 2,340 1,550 2,000 18x40 2,250 25x40 2,530 2,160 2,720 2,410 380 10x16 460 840 12.5x20 1,100 12.5x25 1,170 16x25 850 16x16 940 16x16 950 18x20 1,090 12.5x25 1,260 16x20 1,185 16x31.5 1,010 16x16 1,060 18x16 1,290 18x25 1,460 16x31.5 1,930 16x40 16x20 1,270 1,190 18x20 1,585 18x35.5 16x31.5 2,220 16x35.5 2,210 22x40 16x20 1,340 18x25 1,800 18x31.5 2,330 18x45 16x31.5 2,365 18x31.5 2,620 18x40 2,950 25x40 3,200 18x25 2,290 16x35.5 2,590 16x40 2,800 18x40 3,230 22x40 3,460 18x35.5 2,930 18x45 3,080 22x40 4,090 25x45 4,500 160V (2C) mA Contents DxL 200V (2D) DxL 250V (2E) mA 350V (2V) mA DxL DxL 400V (2G) mA 010 450V (2W) DxL mA DxL mA 6.3x11 21 8x11.5 27 2.2 2R2 6.3x11 30 6.3x11 35 6.3x11 35 8x11.5 39 8x11.5 39 3.3 3R3 6.3x11 39 6.3x11 40 4.7 4R7 6.3x11 43 8x11.5 45 10 100 8x11.5 65 8x11.5 65 10x12.5 92 8x11.5 8x11.5 10x12.5 10x16 43 45 55 95 8x11.5 8x11.5 10x12.5 10x16 45 50 55 95 8x11.5 8x11.5 10x12.5 10x20 45 50 55 105 22 220 10x12.5 110 10x16 140 10x16 140 10x16 150 10x20 170 12.5x16 175 220 215 205 160 330 12.5x20 12.5x25 16x16 12.5x20 33 16x20 225 47 470 10x20 195 12.5x16 215 12.5x20 16x16 230 245 16x20 255 16x25 295 68 680 12.5x20 275 16x20 320 355 540 18x40 560 151 16x25 470 18x20 510 425 415 550 535 18x35.5 150 16x25 18x20 16x31.5 18x25 360 370 460 430 360 375 12.5x25 18x25 16x31.5 18x31.5 16x35.5 18x25 16x31.5 101 265 290 365 360 160 225 220 280 285 400 420 100 12.5x20 16x16 16x20 18x16 12.5x20 16x20 18x16 16x25 18x20 16x35.5 18x31.5 22x40 730 22x40 770 22x45 930 220 221 16x31.5 660 18x31.5 750 18x35.5 760 330 331 18x35.5 820 18x40 965 22x40 1,140 470 330 22x40 1,130 22x40 1,130 25x40 1,325 18x40 600 25x40 22x45 25x45 865 850 1,070 Part Numbering System RGA series 470F 20% 6.3V DxL 6.3x11 6.3x11 331 332 6.3x11 110 8x11.5 10x12.5 330 3,300 140 5x11 DxL mA 100V (2A) 5x11 DxL mA 63V (1J) 20 DxL mA 50V (1H) 2R2 101 mA 35V (1V) DxL DxL mA 25V (1E) mA 100 mA 10V (1A) DxL F 2.2 Bulk Package Gas Type 6.3x11L RGA 471 M 0J BK - 0611 Series Capacitance Capacitance Tolerance Rated Voltage Lead Configuration & Package Rubber Type Case Size Pb-free and PET coating case Lead Wire and Coating Type Note: For more details, please refer to "Part Numbering System (Radial Type)" on page 10. All product specifications in the catalog are subject to change without notice. (CAT. 2014E1) 81