MBR10100CTW SCHOTTKY BARRIER RECTIFIERS REVERSE VOLTAGE FORWARD CURRENT FEATURES - 100 Volts - 10 Amperes TO-220AB * Metal of silicon rectifier, majority carrier conduction * Guard ring for transient protection * Low power loss, high efficiency * High surge&current capability, low VF * For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications MECHANICAL DATA * Case: TO-220AB molded plastic * Plastic package has UL flammability classification 94V-0 * Terminals: Matte Tin, solderable per MIL-STD-202 Method 208 * Lead Free Finish, RoHS Compliant * Polarity: As marked on the body * Weight: 0.06 ounces, 2.24 grams * Mounting position: Any * Max. mounting torque = 0.5 N.m (5.1 Kgf-cm) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. PARAMETER SYMBOL MBR10100CTW UNIT Maximum Repetitive Peak Reverse Voltage @IR=100uA VRRM 100 V Maximum RMS Voltage @IR=100uA VRMS 71 V Maximum DC Blocking Voltage @IR=100uA VDC 100 V IF 10 A IFSM 150 A Tj=25C Tj=125C Tj=25C Tj=125C VF 0.85 0.75 0.95 0.85 V Maximum DC Reverse Current at Rated DC Tj=25C Blocking Voltage Tj=125C IR 10 15 uA mA Average Rectified Output Current @Tc=105C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage Note(1) IF=5A@ IF=5A@ IF=10A@ IF=10A@ Typical thermal resistance Junction to Case (Note 3) RJA 10 C/W Typical thermal resistance Junction to Case (Note 3) RJL 4.0 C/W Typical thermal resistance Junction to Case (Note 3) RJC 5.0 C/W Typical junction Capacitance per element (Note 2) Cj 120 pF Operating junction temperature range TJ -55 to +150 C TSTG -55 to +150 C Storage temperature range REV. 1, Feb-2012, KTHC98 Note : (1) (2) (3) 300us Pulse Width, 2% Duty Cycle. Measured at 1.0MHz and applied reverse voltage of 4.0 VDC. Thermal Resistance Junction to Case, device mounted on 50mm X 50mm X 2mm copper plate. RATING AND CHARACTERISTIC CURVES MBR10100CTW FIG.2- MAXIMUM NON-REPETITIVE SURGE CURRENT FIG.1- FORWARD CURRENT DERATING CURVE 150 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 12 10 120 8 6 4 2 90 60 30 8.3ms Single Half Sine-Wave RESISTIVE OR INDUCTIVE LOAD 0 0 0 25 50 75 100 125 1 150 10 CASE TEMPERATURE, (C) FIG.4- TYPICAL FORWARD CHARACTERISTICS FIG.3- TYPICAL JUNCTION CAPACITANCE 100 INSTANTANEOUS FORWARD CURRENT, (A) 1000 100 Tj=25, f=1MHz 10 1 10 100 10 Tj=125C, 1 Tj=25C, 0.1 PULSE WIDTH 300us, 2% Duty Cycle 0.01 REVERSE,VOLTAGE, (V) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 INSTANTANEOUS FORW ARD VOLTAGE, (V) FIG.5- TYPICAL REVERSE CHARACTERISTICS 10 Tj=150C INSTANTANEOUS REVERSE CURRENT, (mA) Capacitance,(pF) 100 NUMBER OF CY CLES AT 60Hz 1 Tj=125C Tj=100C 0.1 Tj=75C 0.01 Tj=50C 0.001 Tj=25C 0.0001 0.00001 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 120 1.2 1.3 1.4 Legal Disclaimer Notice MBR10100CTW Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.