MBR10100CTW
SCHOTTKY BARRIER RECTIFIERS REVERSE VOLTAGE –
100 Volts
FORWARD CURRENT – 10 Amperes
FEATURES
•
Metal of silicon rectifier, majority carrier conduction
•
Guard ring for transient protection
•
Low power loss, high efficiency
•
High surge&current capability, low VF
•
For use in low voltage, high frequency inverters, free
wheeling, and polarity protection applications
MECHANICAL DATA
•
Case: TO-220AB molded plastic
•
Plastic package has UL flammability classification
94V-0
•
Terminals: Matte Tin, solderable per MIL-STD-202
Method 208
•
Lead Free Finish, RoHS Compliant
•
Polarity: As marked on the body
•
Weight: 0.06 ounces, 2.24 grams
•
Mounting position: Any
•
Max. mounting torque = 0.5 N.m (5.1 Kgf-cm)
TO-220AB
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25
°C
ambient temperature unless otherwise specified.
PARAMETER SYMBOL
MBR10100CTW UNIT
Maximum Repetitive Peak Reverse Voltage
@IR=100uA
V
RRM
100 V
Maximum RMS Voltage @IR=100uA
V
RMS
71 V
Maximum DC Blocking Voltage @IR=100uA
V
DC
100 V
Average Rectified Output Current @Tc=105°C I
F
10 A
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load I
FSM
150 A
Maximum Forward Voltage
Note(1)
IF=5A@
IF=5A@
IF=10A@
IF=10A@
Tj=25°C
Tj=125°C
Tj=25°C
Tj=125°C
V
F
0.85
0.75
0.95
0.85
V
Maximum DC Reverse Current at Rated DC
Blocking Voltage
Tj=25°C
Tj=125°C IR 10
15
uA
mA
Typical thermal resistance Junction to Case (Note 3) R
Θ
JA
10 °C/W
Typical thermal resistance Junction to Case (Note 3) R
Θ
JL
4.0 °C/W
Typical thermal resistance Junction to Case (Note 3) R
Θ
JC
5.0 °C/W
Typical junction Capacitance per element (Note 2) Cj 120 pF
Operating junction temperature range T
J
-55 to +150 °C
Storage temperature range T
STG
-55 to +150 °C
Note : REV. 1, Feb-2012, KTHC98
(1) 300us Pulse Width, 2% Duty Cycle.
(2) Measured at 1.0MHz and applied reverse voltage of 4.0 V
DC
.
(3) Thermal Resistance Junction to Case, device mounted on 50mm X 50mm X 2mm copper plate.
RATING AND CHARACTERISTIC CURVES
MBR10100CTW
FIG.1- FORWARD CURRENT DERATING CURVE
0
2
4
6
8
10
12
0 25 50 75 100 125 150
CASE TEMPERATURE, (°C)
AVERAGE FORWARD CURRENT, (A)
FIG.2- MAXIMUM NON-REPETITIVE SURGE CURRENT
0
30
60
90
120
150
1 10 100
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE CURRENT,
(A)
FIG.3- TYPICAL JUNCTION CAPACITANCE
10
100
1000
1 10 100
REVERSE,VOLTAGE, (V)
FIG.4- TYPICAL FORWARD CHARACTERISTICS
0.01
0.1
1
10
100
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4
INSTANTANEOUS FORWARD VOLTAGE, (V)
INSTANTANEOUS FORWARD CURRENT, (A)
FIG.5- TYPICAL REVERSE CHARACTERISTICS
0.00001
0.0001
0.001
0.01
0.1
1
10
0 20 40 60 80 100 120
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
INSTANTANEOUS REVERSE CURRENT, (mA)
PULSE WIDTH 300us,
2% Duty Cycle
8.3ms Single Half Sine-Wave
RESISTIVE OR INDUCTIVE LOAD
Tj=25°C
Tj=50°C
Tj=75°C
Tj=100°C
Tj=125°C
Tj=150°C
Tj=25°C,
Tj=125°C,
Tj=25℃, f=1MHz
Legal Disclaimer Notice
MBR10100CTW
Important Notice and Disclaimer
LSC reserves the right to make changes to this document and its products and specifications
at any time without notice. Customers should obtain and confirm the latest product
information and specifications before final design, purchase or use.
LSC makes no warranty, representation or guarantee regarding the suitability of its products
for any particular purpose, nor does LSC assume any liability for application assistance or
customer product design. LSC does not warrant or accept any liability with products which
are purchased or used for any unintended or unauthorized application.
No license is granted by implication or otherwise under any intellectual property rights of
LSC.
LSC products are not authorized for use as critical components in life support devices or
systems without express written approval of LSC.