HCA0207 Vishay Draloric Carbon Film Resistors, Power Type FEATURES * * * * * Carbon film resistor with high power rating. Stable film structure on special ceramic Good overload and pulse withstanding characteristics Lead (Pb)-free solder contacts Pure tin plating provides compatibility with lead (Pb)-free and lead containing soldering processes * Compatible with "Restriction of the use of Hazardous Substances" (RoHS) directive 2002/95/EC (issue 2004) * For applications in power electronics and general purpose commercial electronics STANDARD ELECTRICAL SPECIFICATIONS MODEL POWER RATING P 70C W LIMITING ELEMENT VOLTAGE MAX. V 0.8 500 HCA0207 * Coating: green TEMPERATURE COEFFICIENT ppm / K TOLERANCE RESISTANCE RANGE E-SERIES % 1 10R - 1M0 2 4R7 - 2M2 - 220 to - 1500 5 4R7 - 2M2 * Marking see appropriate catalog or web page * Additional yellow dot at the beginning of the code 48 48 24 TECHNICAL SPECIFICATIONS 1) PARAMETER UNIT HCA0207 Rated Dissipation at 70C Limiting Element Voltage1) Max. Pulse Voltage Insulation Voltage (1 min) Thermal Resistance Insulation Resistance Category Temperature Range Failure Rate Terminal Strength, axial Weight W V V V eff K/W C 10-9/h N g 0.8 500 1050 700 130 1010 - 55 to 175 < 20 > 50 0.22 Rated Voltage PxR PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: HCA0207001000G25 H MODEL SIZE HCA 0207 C 0 2 0 0 = neutral 7 0 0 1 0 0 0 G 2 5 TC VALUE TOLERANCE PACKING SPECIAL 0 = neutral See datasheet for TC Value 3 digit value 1 digit multiplier F=1% G=2% J=5% 22 = A2 25 = A5 D5 = R5 up to 2 digits 00 = standard SPECIAL CHARACTER PRODUCT DESCRIPTION: 1) A HCA0207 - 100R 2% A5 MULTIPLIER 7 = *10-3 2 = *102 8 = *10-2 3 = *103 9 = *10-1 4 = *104 0 = *100 5 = *105 1 = *101 6 = *106 HCA0207 - 100R 2% A5 MODEL TC RESISTANCE VALUE TOLERANCE PACKING1) HCA0207 - 49K9 = 49.9K 50R1 = 50.1 1% 2% 5% A2 A5 R5 Please refer to table PACKING, page 2. NOTE: Products can be ordered using either the Product Description or the Part Number. www.vishay.com 196 For Technical Questions, contact ff1aresistors@vishay.com Document Number 20136 Revision 16-Aug-05 HCA0207 Vishay Draloric Carbon Film Resistors, Power Type DIMENSIONS 6 mm L1 L D DIMENSIONS [in millimeters] d MODEL D max. HCA0207 2.5 6.3 -0.3 L1 max B d e 7.5 53 1 0.6 7.5 -0.5 * Taping in acc. with IEC60286-1 * D and L measured in acc. with IEC60294 * d according to IEC60301 e B RATED POWER IN % 300 TEMPERATURE RISE IN C L 200 100 120 100 80 60 40 20 0 0 0.5 1.0 1.5 TEMPERATURE RISE 2.0 2.5 POWER IN WATTS 0 - 55 - 25 0 25 50 75 DERATING 70 100 125 150 175 200 AMBIENT TEMP.IN C PACKING MODEL REEL PIECES / REEL HCA0207 5000 BOX CODE MIN. ORDER QUANTITY PACKING UNITS R5 1 PIECES / BOX CODE 5000 2000 MIN. ORDER QUANTITY PACKING UNITS A5 A2 1 2 PERFORMANCE TEST Endurance 1000 hours at 70C IEC 60115-1 4.25.1 Endurance at UCT IEC60115-1 4.25.3 Overload Test IEC 60115-1 4.13 Thermal Shock IEC 60115-1 4.19, IEC 60068-2-14 Climatic Sequence IEC 60115+1 4.23 Damp Heat Steady State IEC 60115-1 4.24, IEC 60068-2-3 Resistance to Soldering Heat IEC 60115-1 4.18, IEC 60068-2-20 Robustness of Terminations IEC 60115-1 4.16, IEC 60068-2-21 Vibration IEC 60115-1 4.22 1) CONDITIONS OF TEST REQUIREMENTS 1) 1000 hours at 70C, 1.5 hours "ON", 0.5 hours "OFF" 2.0% 1000 hours at 155C without load 5.0% Short time overload 5 seconds at 2.5 x rated voltage or twice the limiting element voltage 0.5% Rapid change between upper and lower category temperature 0.25% Dry heat, damp heat cyclic, cold, low air pressure 2.0% 56 days at 40C and 93% relative humidity 2.0% 10 seconds at 260C solder bath temperature 0.25% Tensile, bending and torsion 0.25% 0.75mm or 10g, 10Hz-500Hz 6 hours 0.25% For a resistance range of 10R to 1M0 APPLICABLE SPECIFICATIONS * CECC40000 / 40100 / EN 140000 / IEC 60115-1 Document Number 20136 Revision 16-Aug-05 For Technical Questions, contact ff1aresistors@vishay.com www.vishay.com 197 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1