05314 P15KP17 - P15KP280A Only One Name Means ProTek'TionTM 15kW power tvs component Description The P15KP Series, are discrete 15,000 Watt, silicon transient voltage suppressors (TVS) designed for use in applications where large voltage transients can permanently damage voltage sensitive components and equipment. The P15KP series is available in voltages ranging from 17V to 280V with 5 percent and 10 percent tolerances. Both tolerances are referenced to the power supply output or operating voltage level. This series is compatiable with IEC 61000-4-5 (Surge) requirements. AXIAL LEAD package Features applications * Compatible with IEC 61000-4-5 (Surge): 48A, 8/20s - L3(LineGround), L4(Line-Line) & L1 (Power) * 15,000 Watts Peak Pulse Power per Line (tp = 10/1000s) * Unidirectional and Bidirectional Configurations * Easy Mounting to Printed Circuit Board * tClamping (0V to VBR Min.) < 1 x 10-12 seconds theoretical (Unidirectional) and < 5ns (Bidirectional) * Available in Multiple Voltages Ranging From 17V to 280V * RoHS Complaint (Exemption #7) * * * * Relay Drives Motor (Start/Stop) Back EMF Protection Module Lightning Protection Secondary Lightning Protection for AC/DC mechanical characteristics * Molded Case * Approximate Weight: 5 grams * Lead-Free Pure-Tin Plating (Annealed) * Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270C * Flammability Rating UL 94V-0 CIRCUIT DIAGRAMS UNIDIRECTIONAL 05314.R1 2/11 BIDIRECTIONAL Page 1 www.protekdevices.com 05314 P15KP17 - P15KP280A Only One Name Means ProTek'TionTM typical device characteristics MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 10/1000s) - See Figure 1 SYMBOL VALUE UNITS PPP 15,000 Watts Forward Surge Rating - 1/120 seconds - See Note 2 IF 200 Amps Steady State Power Dissipation PP 1.0 Watts Storage Temperature TSTG -55 to 150 C TL -55 to 150 C Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified PART NUMBER (Notes 1 - 2) RATED STAND-OFF VOLTAGE VWM VOLTS BREAKDOWN VOLTAGE MIN V(BR) VOLTS MAXIMUM LEAKAGE CURRENT @I T mA @V WM ID A MAXIMUM CLAMPING VOLTAGE (Fig. 2) temperature coefficient of v(br) @ 10/1000s VC @ I PP qV(BR) mV/C P15KP17 17.0 18.9 50 5000 32.3V @ 464.0A 19 P15KP17A 17.0 18.9 50 5000 29.3V @ 512.0A 17 P15KP18 18.0 20.0 50 5000 34.2V @ 439.0A 20 P15KP18A 18.0 20.0 50 5000 30.9V @ 485.0A 18 P15KP20 20.0 22.2 20 1500 37.9V @ 396.0A 24 P15KP20A 20.0 22.2 20 1500 34.3V @ 437.0A 21 P15KP22 22.0 24.4 10 500 41.1V @ 365.0A 27 P15KP22A 22.0 24.4 10 500 37.1V @ 404.0A 24 P15KP24 24.0 26.7 5 150 45.0V @ 333.0A 30 P15KP24A 24.0 26.7 5 150 40.7V @ 369.0A 27 P15KP26 26.0 28.9 5 50 48.7V @ 308.0A 32 P15KP26A 26.0 28.9 5 50 44.0V @ 341.0A 29 P15KP28 28.0 31.1 5 25 52.4V @ 286.0A 35 P15KP28A 28.0 31.1 5 25 47.5V @ 316.0A 31 P15KP30 30.0 33.3 5 15 56.2V @ 267.0A 27 P15KP30A 30.0 33.3 5 15 50.7V @ 296.0A 34 P15KP33 33.0 36.7 5 10 60.6V @ 248.0A 42 P15KP33A 33.0 36.7 5 10 54.8V @ 274.0A 38 P15KP36 36.0 40.0 5 10 66.0V @ 227.0A 46 P15KP36A 36.0 40.0 5 10 59.7V @ 251.0A 41 P15KP40 40.0 44.4 5 10 72.8V @ 206.0A 51 P15KP40A 40.0 44.4 5 10 65.8V @ 228.0A 46 P15KP43 43.0 47.8 5 10 77.1V @ 195.0A 55 P15KP43A 43.0 47.8 5 10 69.7V @ 215.0A 50 P15KP45 45.0 50.0 5 10 80.7V @ 186.0A 57 P15KP45A 45.0 50.0 5 10 73.0V @ 205.0A 52 05314.R1 2/11 Page 2 www.protekdevices.com 05314 P15KP17 - P15KP280A Only One Name Means ProTek'TionTM typical device characteristics ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified PART NUMBER (Notes 1 - 2) P15KP48 RATED STAND-OFF VOLTAGE BREAKDOWN VOLTAGE MAXIMUM LEAKAGE CURRENT MAXIMUM CLAMPING VOLTAGE (Fig. 2) temperature coefficient of v(br) VWM VOLTS MIN V(BR) VOLTS @I T mA @V WM ID A @ 10/1000s VC @ I PP qV(BR) mV/C 48.0 53.3 5 10 85.9V @ 175.0A 62 P15KP48A 48.0 53.3 5 10 77.7V @ 193.0A 56 P15KP51 51.0 56.7 5 10 91.5V @ 164.0A 66 P15KP51A 51.0 56.7 5 10 82.8V @ 181.0A 60 P15KP54 54.0 60.0 5 10 96.8V @ 155.0A 70 P15KP54A 54.0 60.0 5 10 87.5V @ 171.0A 63 P15KP58 58.0 64.4 5 10 104.0V @ 144.0A 76 P15KP58A 58.0 64.4 5 10 94.0V @ 160.0A 68 P15KP60 60.0 66.7 5 10 107.0V @ 140.0A 78 P15KP60A 60.0 66.7 5 10 97.3V @ 154.0A 71 P15KP64 64.0 71.1 5 10 115.0V @ 130.0A 84 P15KP64A 64.0 71.1 5 10 104.0V @ 144.0A 76 P15KP70 70.0 77.8 5 10 126.0V @ 119.0A 92 P15KP70A 70.0 77.8 5 10 114.0V @ 132.0A 83 P15KP75 75.0 83.3 5 10 135.0V @ 111.0A 100 P15KP75A 75.0 83.3 5 10 122.0V @ 123.0A 89 P15KP78 78.0 86.7 5 10 140.0V @ 107.0A 104 P15KP78A 78.0 86.7 5 10 126.0V @ 119.0A 93 P15KP85 85.0 94.4 5 10 152.0V @ 99.0A 113 P15KP85A 85.0 94.4 5 10 137.0V @ 109.0A 102 P15KP90 90.0 100.0 5 10 160.0V @ 94.0A 120 P15KP90A 90.0 100.0 5 10 146.0V @ 103.0A 109 P15KP100 100.0 111.0 5 10 179.0V @ 84.0A 134 P15KP100A 100.0 111.0 5 10 162.0V @ 93.0A 121 P15KP110 110.0 122.0 5 10 196.0V @ 77.0A 147 P15KP110A 110.0 122.0 5 10 178.0V @ 84.0A 133 P15KP120 120.0 133.0 5 10 214.0V @ 70.0A 161 P15KP120A 120.0 133.0 5 10 193.0V @ 78.0A 145 P15KP130 130.0 144.0 5 10 231.0V @ 65.0A 174 P15KP130A 130.0 144.0 5 10 209.0V @ 72.0A 157 P15KP150 150.0 167.0 5 10 268.0V @ 56.0A 202 P15KP150A 150.0 167.0 5 10 243.0V @ 62.0A 183 P15KP160 160.0 178.0 5 10 287.0V @ 52.0A 216 P15KP160A 160.0 178.0 5 10 259.0V @ 58.0A 195 05314.R1 2/11 Page 3 www.protekdevices.com 05314 P15KP17 - P15KP280A Only One Name Means ProTek'TionTM typical device characteristics ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified PART NUMBER (Notes 1 - 2) P15KP170 RATED STAND-OFF VOLTAGE BREAKDOWN VOLTAGE MAXIMUM LEAKAGE CURRENT MAXIMUM CLAMPING VOLTAGE (Fig. 2) temperature coefficient of v(br) VWM VOLTS MIN V(BR) VOLTS @I T mA @V WM ID A @ 10/1000s VC @ I PP qV(BR) mV/C 170.0 189.0 5 10 304.0V @ 49.0A 229 P15KP170A 170.0 189.0 5 10 275.0V @ 55.0A 207 P15KP180 180.0 200.0 5 10 321.0V @ 47.0A 242 P15KP180A 180.0 200.0 5 10 291.0V @ 52.0A 219 P15KP200 200.0 222.0 5 10 356.0V @ 42.0A 269 P15KP200A 200.0 222.0 5 10 322.0V @ 47.0A 243 P15KP220 220.0 245.0 5 10 393.0V @ 38.0A 297 P15KP220A 220.0 245.0 5 10 356.0V @ 42.0A 269 P15KP240 240.0 267.0 5 10 428.0V @ 35.0A 324 P15KP240A 240.0 267.0 5 10 388.0V @ 39.0A 293 P15KP260 260.0 289.0 5 10 464.0V @ 32.0A 352 P15KP260A 260.0 289.0 5 10 419.0V @ 36.0A 317 P15KP280 280.0 311.0 5 10 500.0V @ 30.0A 378 P15KP280A 280.0 311.0 5 10 452.0V @ 33.0A 342 notes 1. Part numbers shown are unidirectional devices. Add a "CA" suffix to specify bidirectional devices, such as P15KP20CA. 2. VF = 7.5 Volts @ 200A, 8.3ms(1/2 Sine Wave) - Unidirectional devices only. 05314.R1 2/11 Page 4 www.protekdevices.com 05314 P15KP17 - P15KP280A Only One Name Means ProTek'TionTM typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - kilowatts 1,000 100 15kW, 10/1000s Waveform 10 1 0.1 1 10 100 td - Pulse Duration - s 1,000 10,000 figure 3 POWER DERATING CURVE figure 2 PULSE WAVEFORM 100 tf TEST WAVEFORM PARAMETERS tf = 10s td = 1000s 100 Peak Value IPP Peak Pulse Power 10/1000s 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP 100,000 td = t/(IPP/2) 50 60 40 20 e 0 0 -t 1 2 0 3 25 50 75 100 125 150 TL - Lead Temperature - C t - Time - ms 05314.R1 2/11 0 Page 5 www.protekdevices.com 05314 P15KP17 - P15KP280A Only One Name Means ProTek'TionTM axial LEAD(MOD) package information outline dimensions millimeters dim inches min max min max A 25.4 - 1.00 - B 9.27 9.77 0.365 0.385 C 25.4 - 1.00 - D 1.20 DIA. 1.30 DIA. 0.048 DIA. 0.052 DIA. E 5.96 6.47 0.235 0.255 A E Notes 1. Dimensions are exclusive of mold flash and metal burrs. B C D ORDERING INFORMATION base PART NUMBER (xx = Voltage) LEADFREE SUFFIX TAPE SUFFIX QTY/REEL REEL SIZE TUBE qty P15KPxx -LF n/a n/a n/a n/a P15KPxxA -LF n/a n/a n/a n/a P15KPxxCA -LF n/a n/a n/a n/a Notes MARKING DIAGRAM 1. Marking on Part - logo, part number, date code and positive terminal marked with band(unidirectional only). P Page 6 yyww Part # 05314.R1 2/11 www.protekdevices.com 05314 P15KP17 - P15KP280A Only One Name Means ProTek'TionTM company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT (c) ProTek Devices 2009 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05314.R1 2/11 Page 7 www.protekdevices.com