RS20-0800M2M2SDAE - Hirschmann - Datasheet.Directory

1.717.217.22998www.hirschmann-usa.com

OpenRail Compact and

Modular Switches

With the continued growth and demand for

application-specic switches, Hirschmann has

developed the OpenRail line of managed and

unmanaged switches. The OpenRail series

allows users to choose either a Compact

or Modular switch, as well as specify port

density, backbone type (RJ45/ber) and speed,

temperature ratings, conformal coating and a

myriad of industry approvals. Both compact

Redundant Ring Coupling

(Gigabit capable) which may also

be used as redundant uplinks

to corporate backbone switch, server

or PLC

Redundant Gigabit HIPER-Ring

with max. 300 ms resiliency

Redundant HIPER-Ring with

max. 300 ms resiliency

Redundant link

and modular platforms offer redundant

power inputs and fault relay (triggerable by

loss of power and/or port link), while only

the managed versions offers media/ring

redundancy, multicast ltering/IGMP Snooping,

VLAN, port mirroring, network diagnostics, port

control, etc.

Compact Switches

A compact platform that allows for up to

24-ports in a mere 4.25” of DIN rail! Available

in managed and unmanaged versions.

RS20 Series Managed/Unmanaged

8x, 9x, 16x, 24x and 25x 10/100 Mbps ports

RS20 Series Managed (Only)

4x 10/100 Mbps ports

RS30 Series

2x Gigabit Uplinks and 8x, 16x, and 24x 10/100

Mbps ports

Available as a managed or unmanaged switch

RS40 Series

9x Gigabit ports

Available as a managed switch only

Modular Switches (MICE)

A modular and exible platform that

facilitates an almost limitless variety of port

variations while allowing users to change the

switch’s port density and conguration on

the y using hot-plug Media Modules. Only

available as a managed switch.

MS20 Series

MS20-08: 8x 10/100 Mbps ports (max)

MS20-16: 16x 10/100 Mbps ports, with backplane

extenison (MB-2T) a port density of 24x 10/100

Mbps can be obtained

MS30 Series

MS30-08: 2x Gigabit and 8x 10/100 Mbps ports

MS30-16: 2x Gigabit and 16x 10/100 Mbps ports,

with backplane extension (MB-2T) a port density of

28x 10/100 Mbps (max) can be obtained

MS40 Series (PowerMICE)

4x Gigabit and 16x 10/100 Mbps ports, with

backplane extension (MB-2T) a port density of

28x 10/100 Mbps can be obtained. NOTE: Layer 3

routing switch version is available.

OpenRail Managed DIN Rail Mount Switches

Example of compact and modular managed and unmanaged switches employeed in a Water Wastewater treatment plant.

1.717.217.2299www.hirschmann-usa.com 9

OpenRail Conﬁguration

RS20-0800S2TDHEHH04.0. OpenRail Managed DIN Rail Mount Switches - Part Conﬁgurator

RS20-

04.0.

Design/Model

Compact Rail Switch Modular MICE Switch

RS20 10/100 Mbps Ethernet uplinks MS20 10/100 Mbps Ethernet uplinks

RS22 10/100 Mbps Ethernet uplinks (4 xPoE) MS30 10/100/1000 Mbps Ethernet uplinks

RS30 10/100/1000 Mbps Ethernet uplinks

RS32 10/100/1000 Mbps Ethernet uplinks (4 x PoE)

RS40 Full Gigabit

Ports Fast Ethernet

04 (only RS20) 00, 04, 08, 16, 24: number of 10/100 Mbps ports (00 for RS40)

09 (only RS20, RS22) 09, 17, 25: number of 100 Mbps ports (RS20 >2 ﬁber ports)

17 (RS20, RS22, RS30, RS32)

24 (RS20, RS22, RS30, RS32)

24 (MS20, MS30)

25 (RS20, RS22, RS30, RS32)

Ports Gigabit Ethernet

00 00, 02: number of 1000 Mbps ports (00-RS22 and 02-RS30)

09 09: number of 1000 Mbps ports (RS40)

Ports, Type 1. Uplink

T1 1 x Twisted Pair RJ45 (10/100 Mbps) O6 1 x SFP Slot Gigabit

M2 1 x Multimode SC (100 Mbps) MM 2 x Multimode SC (100 Mbps)

M4 1 x Multimode ST (100 Mbps) NN 2 x Multimode ST (100 Mbps)

S2 1 x Singlemode SC (100 Mbps) VV 2 x Singlemode SC (100 Mbps)

S4 1 x Singlemode ST (100 Mbps) UU 2 x Singlemode ST (100 Mbps)

L2 1 x Long Haul SC (100 Mbps) OO 2 x SFP Slot Gigabit

G2 1 x Long Haul+ SC (100 Mbps) CC 2 x SFP Combo Gigabit

Ports, Type 2. Uplink

T1 1 x Twisted Pair RJ45 (10/100 Mbps) L2 1 x Long Haul SC (100 Mbps)

M2 1 x Multimode SC (100 Mbps) G2 1 x Long Haul+ SC (100 Mbps)

M4 1 x Multimode ST (100 Mbps) O6 1 x SFP Slot Gigabit

S2 1 x Singlemode SC (100 Mbps) ZZ 2 x SFP Slot FE (100 Mbps)

Temperature Range

S 0°C up to + 60° C

T– 40° C up to + 70° C

E– 40° C up to + 70° C includes Conformal Coating

Software Version

UUnmanaged

EEnhanced, additional ﬁlters and redundancy

PProfessional, additional security and

advanced redundancy

Conﬁguration

HStandard PPROFINET pre-setting

XCustomer speciﬁc EEtherNet/IP pre-setting

OEM-Type

HStandard

XCustomer speciﬁc

Software Release

04.0. Software release 4.0.

XX.X. Newest software release

Power Supply

AMICE 24 VDC (18–32 V)

CMICE 24 V/48VDC (18 – 60 V)

DRail 12/24 V/48 VDC (9.6 – 60 V) and 24 VAC (18–30 V)

EMICE 24/18 VDC (18– 60 V) 6 pin connector

PRail 47 – 52 VDC (PoE)

Approvals

AcUL508 · cUL1604 · Class1 Div.2

HcUL508 · cUL1604 · Class1 Div.2

GL: German Lloyd · IEC61850-3: Substation

IEEE 1613: Substation · EN50121-4: Railway (along track)

BcUL508 · cUL1604 · Class1 Div.2

GL: German Lloyd · IEC61850-3: Substation

IEEE1613: Substation · EN50121-4: Railway (along track)

ATEX100a, Zone2: Hazardous Location

NOTE: Due to the vast number of switch variations (port

density, port type, approvals, power input, etc.), Hirschmann

has developed a part number matrix that permits users to

custom-tailor their own switch. Simply decide on Compact or

Modular, number of ports, the type of uplink ports (these can

be used as standard ports), and select the temperature, power

and approvals.

It is highly recommended that conﬁgurations are veriﬁed using

the online Conﬁgurator.

www.conﬁgurator.hirschmann.com

Required Field Optional

1.717.217.229910 www.hirschmann-usa.com

RS20 Series

Compact Switches

All copper ports are 10/100 Mbps.

Uplink ports are 100 Mbps.

r Available in 4/8/9/16/17/24 and 25x100

Mbps ports

r Fully managed (web, SNMP and CLI) – VLAN,

IGMP snooping (multicast ltering), port

mirroring, port control, port security, link

alarms, broadcast limiter, trafc diagnostics,

ring redundancy and much more

r Fiber ports are available in multimode and/or

singlemode

r Dual power inputs and fault relay

r USB port for conguration backup/restore

and fast device replacement

r Std. 0°C to + 60°C (– 40°C to + 70° C,

conformal coating available)

r Differentiator between similar switches

listed is the rmware level/features. See

bottom of page 5 (E is Enhanced, P is

Professional)

All Copper

Part No. Order No. Ports

RS20-0400T1T1SDAE 943 434-007 4 x RJ45

RS20-0400T1T1SDAP 943 434-008 4x RJ45

RS20-0800T1T1SDAE 943 434-021 8 x RJ45

RS20-0800T1T1SDAP 943 434-022 8x RJ45

RS20-1600T1T1SDAE 943 434-023 16 x RJ45

RS20-1600T1T1SDAP 943 434-024 16x RJ45

RS20-2400T1T1SDAE 943 434-041 24 x RJ45

RS20-2400T1T1SDAP 943 434-042 24x RJ45

Multimode

Part No. Order No. Ports

RS20-0400M2T1SDAE 943 434-009 3 x RJ45, 1x SC

RS20-0400M2T1SDAP 943 434-010 3x RJ45, 1 x SC

RS20-0400M2M2SDAE 943 434-001 2 x RJ45, 2x SC

RS20-0400M2M2SDAP 943 434-002 2x RJ45, 2 x SC

RS20-0800M2M2SDAE 943 434-003 6 x RJ45, 2x SC

Compact Managed DIN Rail Mount Switches

RS20-0800M2M2SDAP 943 434-004 6x RJ45, 2 x SC

RS20-0800M4M4SDAE 943 434-017 6 x RJ45, 2x ST

RS20-0800M4M4SDAP 943 434-018 6x RJ45, 2 x ST

RS20-1600M2T1SDAE 943 434-025 15 x RJ45, 1x SC

RS20-1600M2T1SDAP 943 434-026 15x RJ45, 1 x SC

RS20-1600M2M2SDAE 943 434-005 14 x RJ45, 2x SC

RS20-1600M2M2SDAP 943 434-006 14x RJ45, 2 x SC

RS20-2400M2M2SDAE 943 434-043 22 x RJ45, 2x SC

RS20-2400M2M2SDAP 943 434-044 22x RJ45, 2 x SC

Single-Mode

Part No. Order No. Ports

RS20-0400S2T1SDAE 943 434-011 3 x RJ45, 1x SC

RS20-0400S2T1SDAP 943 434-012 3 x RJ45, 1 x SC

RS20-0400S2S2SDAE 943 434-013 2 x RJ45, 2 x SC

RS20-0400S2S2SDAP 943 434-014 2 x RJ45, 2x SC

RS20-0800S2S2SDAE 943 434-019 6 x RJ45, 2 x SC

RS20-0800S2S2SDAP 943 434-020 6 x RJ45, 2x SC

RS20-1600S2S2SDAE 943 434-027 14 x RJ45, 2 x SC

RS20-1600S2S2SDAP 943 434-028 14 x RJ45, 2x SC

RS20-2400S2S2SDAE 943 434-045 22 x RJ45, 2 x SC

RS20-2400S2S2SDAP 943 434-046 22 x RJ45, 2x SC

RS30 Series

Compact Switches

All copper ports are 10/100 Mbps.

Uplink ports are Gigabit.

r Available in 8x, 16 x and 24x10/100 Mbps

ports. All with 2 additional Gigabit ports

r Identical management and features as RS20

r Fiber uplink ports are available in multi

mode and/or singlemode by using

Gigabit SFP

All Copper

Part No. Order No. Ports

RS30-0802T1T1SDAE 943 434-029 8 x10/100 RJ45,

2 x 10/100/1000

RJ45

RS30-0802T1T1SDAP 943 434-030 8 x 10/100 RJ45,

2 x 10/100/1000

RJ45

RS30-1602T1T1SDAE 943 434-033 16 x10/100 RJ45,

2 x 10/100/1000

RJ45

NOTE: Add an “-E” to all-copper 4, 8, 16 and 24 port

switches for pre-conﬁgured IGMP Snooping, auto-negoti-

ation on the uplinks and more (a factory-set conﬁguration

for EtherNet/IP). Please contact us for more details.

NOTE: A combo port is a dual 10/100/1000 Mbps RJ45

and 1000 Mbps SFP port. Only one is active at a time.

The use of one SFP port disables one RJ45 port. The use

of two SFP ports disables two RJ45 ports, etc.

RS30-1602T1T1SDAP 943 434-034 16 x 10/100 RJ45,

2 x 10/100/1000

RJ45

RS30-2402T1T1SDAE 943 434-037 24 x10/100 RJ45,

2 x 10/100/1000

RJ45

RS30-2402T1T1SDAP 943 434-038 24 x 10/100 RJ45,

2 x 10/100/1000

RJ45

Fiber

Part No. Order No. Ports

RS30-0802O6O6SDAE 943 434-031 8 x 10/100 RJ45,

2 x Gigabit SFP

RS30-0802O6O6SDAP 943 434-032 8x 10/100 RJ45,

2 x Gigabit SFP

RS30-1602O6O6SDAE 943 434-035 16 x 10/100 RJ45,

2 x Gigabit SFP

RS30-1602O6O6SDAP 943 434-036 16x 10/100 RJ45,

2 x Gigabit SFP

RS30-2402O6O6SDAE 943 434-039 24 x 10/100 RJ45,

2 x Gigabit SFP

RS30-2402O6O6SDAP 943 434-040 24x 10/100 RJ45,

2 x Gigabit SFP

RS40 Series

Compact Switches

All ports are Gigabit

r Available with 9 ports (4 of which are

combo ports)

r Identical management and features as RS20

and RS30

r 9x 10/100/1000 RJ45 and 4 x RJ45/SFP

combo ports (function of one RJ45 is lost for

each SFP utilized)

r Fiber uplink ports are available in multimode

and/or singlemode by using Gigabit or 100

Mbps SFP

Compact Switches - RS40

Part No. Ports

RS40-0009CCCCSDAE 9 x 10/100/1000 RJ45

4 x 100/1000 SFP

RS40-0009CCCCSDAP 9x 10/100/1000 RJ45

4 x 100/1000 SFP

FAST 30ms

HiPer-Ring

FAST 30ms

HiPer-Ring

300ms

HiPer-Ring

1.717.217.2299www.hirschmann-usa.com 11

RSR Series

Compact Über-Rugged™ Switches

RSR-XX Ruggedized Gigabit Ethernet Switches for DIN Rail-Mount

Über-Rugged™ Managed DIN Rail Mount Switches

r Extended temperature range:

-40°C to +85°C

r Up to two AC/DC inputs with choice

of voltage

r DIN rail or panel mounting

r Extremely high RFI/EMI immunity

r Robust metal housing

r Resistant to shock and vibration

r From 8TX to 10 ports ber

r Panel mount kit available

r Ultra-fast ring recovery time <10ms

BLAZING 10ms

HiPer-Ring

RSR30-0802CCZZT1UCCHPHH04.0. Uber-Rugged Managed DIN Rail Mount Switches - Part Conﬁgurator

RSR30-

04.0.

Design/Model

RSR20 Rail Switch Rugged Fast Ethernet

RSR30 Rail Switch Rugged Gigabit Ethernet Uplink Ports

Ports Fast Ethernet

06 6x 100 Mbps Ethernet 08 8x 100 Mbps Ethernet

07 7x 100 Mbps Ethernet 09 9x 100 Mbps Ethernet

Ports Gigabit Ethernet

00 0x 1000 Mbps Ethernet 03 3x 1000 Mbps Ethernet

02 2x 1000 Mbps Ethernet

Ports Typ1, Uplink

CC 2 x Combo Port Gigabit Ethernet O7 Combo Port Gigabit Ethernet

OO 2 x SFP Slot Gigabit Ethernet O6 SFP Slot Gigabit Ethernet

TT 2 x Twisted Pair (Tx) / RJ45 T1 Twisted Pair (Tx) / RJ45

MM 2 x Multimode FX SC M2 Multimode FX SC

JJ 2 x Multimode FX MTRJ M3 Multimode FX MTRJ

NN 2 x Multimode FX ST M4 Multimode FX ST

VV 2 x Singlemode FX SC S2 Singlemode FX SC

UU 2 x Singlemode FX ST S4 Singlemode FX ST

LL 2 x Singlemode Long Haul FX SC L2 Singlemode Long Haul FX SC

GG 2 x Singlemode Long Haul+ FX SC (200 km) G2 Singlemode Long Haul+ FX SC (200 km)

ZZ 2 x SFP Slot (100 Mbps) Z6 SFP Slot (100 Mbps)

Ports Type 2, Uplink

ZZ 2 x SFP Slot (100 Mbps) M4 Multimode FX ST

O7 Compo Port Gigabit Ethernet S2 Singlemode FX SC

O6 SFP Slot Gigabit Ethernet S4 Singlemode FX ST

T1 Twisted Pair (Tx) / RJ45 L2 Singlemode Long Haul FX SC

M2 Multimode FX SC G2 Singlemode Long Haul+ FX SC (200 km)

M3 Multimode FX MTRJ Z6 SFP Slot (100 Mbps)

Remaining Ports

T1 Twisted Pair (Tx) / RJ45 Z6 SFP Slot (100 Mbps)

Approvals

HUL508, GL, IEC 61850; IEEE 1613; EN 50121

Software Version

PProfessional

Conﬁguration

HProfessional XCustomer speciﬁc PPROFINET pre-setting EEthernet/IP pre-setting

OEM-Type

HStandard XCustomer speciﬁc

Software Release

04.0 Software Release 4.0 XX.X. Newest Software Release

Temperature Range

SStandard 0° C up to + 60° C

UExtended – 40° C up to + 85° C

FExtended – 40° C up to + 85° C inclusive Conformal Coating

Voltage Range 1

C24/36/48 VDC K60/120/250 VDC and 110/230 VAC

Voltage Range 2

9Not availabe K60/120/250 VDC and 110/230 VAC

C24/36/48 VDC

Required Field Optional

1.717.217.229912 www.hirschmann-usa.com

MS20 Modular Switches

All ports are 10/100 Mbps. Fully managed (web, SNMP and CLI) – IGMP snooping (multicast

ltering), VLAN, port mirroring, port control, port security, link alarms, broadcast limiter, trafc

diagnostics, HIPER-Ring redundancy, RSTP, etc.

r Available in a 2- and 4-slot version (4-slot can be expanded to a 6 slot using MB-2T)

r Requires the use of media modules

r Dual power inputs and dual fault relay outputs

r USB conguration backup/restore and fast device replacement

r Std. 0°C to + 60°C (– 40°C to + 70° C and conformal coating available)

r Differentiator between similar switches listed is the rmware level/features.

(E = Enhanced, P = Professional).

MS30 Modular Switches

Uplink ports are 10/100/1000 Mbps. All other ports are 10/100 Mbps. Same functionality and features as MS20, with the exception of an added slot

for a Gigabit Media Module (for 2x 10/100/1000 Mbps uplinks).

r MS30-08 can have a max of 8x 10/100 Mbps ports and 2x10/100/1000 Mbps ports

r MS30-16 can have 16x 10/100 Mbps ports (24 ports max w/ MB-2T) and 2x10/100/1000 Mbps ports

r Uplinks may be copper and/or ber. Fiber is available in multimode and singlemode by using Gigabit or 100 Mbps SFPs.

Managed Modular DIN Rail Mount Switches

MS20 Modular Switches / All Ports are 10/100 Mbps

Part No. Order No. Ports

MS20-0800SAAE 943 435-001 2 x any MM2/MM3 (4 slots, max. 8 x 10/100 Mbps ports)

MS20-0800SAAP 943 435-002 2x any MM2/MM3 (4 slots, max. 8x 10/100 Mbps ports)

MS20-1600SAAE 943 435-003 4 x any MM2/MM3 (6 slots max. 16x 10/100 Mbps ports/24 ports w/ MB-2T)

MS20-1600SAAP 943 435-004 4x any MM2/MM3 (6 slots max. 16 x 10/100 Mbps ports/24 ports w/ MB-2T)

MS30 Modular Switches / Uplink Ports are 10/100/1000 Mbps - All Other Ports are 10/100 Mbps

Part No. Order No. Ports

MS30-08002SAAE 943 435-005 2 x any MM2/MM3 and 1 x MM4-2TX/SFP (max 10 ports)

MS30-08002SAAP 943 435-006 2x any MM2/MM3 and 1 x MM4-2TX/SFP (max 10 ports)

MS30-16002SAAE 943 435-007 4 x any MM2/MM3 (6 x w/MB-2T) and 1 x MM4-2TX/SFP (max 26 ports)

MS30-16002SAAP 943 435-008 4x any MM2/MM3 (6 x w/MB-2T) and 1 x MM4-2TX/SFP (max 26 ports)

MS20-08 MS20-16 MS20-24 (including backplane extension MB-2T)

MS30-08 MS30-16 MS30-24 (including backplane extension MB-2T)

FAST 30ms

HiPer-Ring

300ms

HiPer-Ring

1.717.217.2299www.hirschmann-usa.com 13

MS Backplane Extensions

MICE 2-slot backplane extensions are used for MS20-16, MS30-16 and MS4128, Only one per switch may be used for a maximum of six total slots.

PowerMICE Gigabit Layer 2/3 Switches

For applications that require a more powerful and feature-rich switch, Hirschmann offers its

PowerMICE modular switches. Similar in functionality and features to the MS30-16 on the

previous page, the PowerMICE adds two additional Gigabit ports (for a total of four) and an

option to have Layer 3 routing capabilities.

MICE Media Modules

Any combination of the following hot-swappable media modules may be used to attain the

desired port density/type on a MICE switch. The only restriction is the number of slots that the

MICE has (one media module per slot).

MS Backplane Extensions

Part No. Order No. Extensions for Use With

MB-2T 943 733-102 MS20-16, MS30-16, and MS4128

MB20-2TAHH 943 435-002 Same as above but with -40°C to +75°C

MICE Modular Managed Industrial Ethernet Layer 2/3 Switches with Professional or Enhanced Management

Part No. Order No. Layer/Management Ports Conﬁgurations

MS4128:L2P 943 009-001 Layer 2/Professional 28 24x 10/100 Mbps + 4 Gigabit (any copper/ﬁber mix)

MS4128-L3E 943 009-201 Layer 3/Enhanced 28 24x 10/100 Mbps + 4 Gigabit (any copper/ﬁber mix)

MS4128-L3P 943 009-201 Layer 3/Professional 28 24x 10/100 Mbps + 4 Gigabit (any copper/ﬁber mix)

MICE Modules: Maximum Module Density

Modular Switch Density

MS20-08 2 x any MM2/MM3

MS20-16 4 x any MM2/MM3 (6 x MB-2T)

MS30-08 2 x any MM2/MM3 plus 1 x MM4-2TX/SFP

MS30-16 4 x any MM2/MM3 (6 x MB-2T), plus 1 x MM4-2TX/SFP

MS4128 4 x any MM2/MM3 (6 x MB-2T), plus 1 x any MM4

MICE Modules: ALL COPPER

Type Part No. Order No. Ports/Speed

ALL COPPER MM2-4TX1 943 722-101 4 x 10/100 Mbps RJ45

ALL COPPER MM2-4TX1-EEC 943 722-151 4 x 10/100 Mbps RJ45, ext. temperature range*

MICE Modules: MULTIMODE

MULTIMODE MM2-4FXM3 943 721-101 4 x 100 Mbps MM MTRJ

MULTIMODE MM2-2FXM2 943 718-101 2 x 100 Mbps MM SC

MULTIMODE MM3-4FXM2 943 764-101 4 x 100 Mbps MM SC

MULTIMODE MM3-4FXM4 943 835-101 4 x 100 Mbps MM ST

MULTIMODE MM3-1FXM2/3TX1 943 839-101 1 x 100 Mbps MM SC, 3x RJ45

MULTIMODE MM3-2FXM4/2TX1 943 837-101 2 x 100 Mbps M ST, 2x RJ45

MULTIMODE MM2-2FXM3/2TX1 943 720-101 2 x 100 Mbps MM MTRJ, 2x RJ45

MULTIMODE MM3-4FLM4 943 760-101 4 x 10 Mbps MM ST

MULTIMODE MM3-2FXM2/2TX1 943 761-101 2 x 100 Mbps MM SC, 2x RJ45

MULTIMODE MM3-2FXM2/2TX1-EEC 943 761-151 2x 100 Mbps MM SC, 2x RJ45, ext. temperature range*

MULTIMODE MM3-1FXM2/1FXS2/2TX1 943 929-101 2 x 100 Mbps SC (1 x MM and 1 x SM), 2 x RJ45

FAST 30ms

HiPer-Ring

NOTE: SFPs are needed for MM4 ﬁber functionality.

NOTE: EEC media modules have an extended temperature range of –40°C to + 70° C. Additional EEC modules are available.

Please consult your Hirschmann representative or www.hirschmann-usa.com

1.717.217.229914 www.hirschmann-usa.com

MICE Modules: SINGLEMODE

Type Part No. Order No. Ports/Speed

SINGLEMODE MM 2-2FXS2 943 719-101 2 x 100 Mbps SM SC

SINGLEMODE MM 3-2FXS2/2TX1 943 762-101 2 x 100 Mbps SM SC, 2x RJ45

SINGLEMODE MM 3-2FXS2/2TX1-EEC 943 762-151 2 x 100 Mbps SM SC, 2 x RJ45, ext. temp.*

SINGLEMODE MM 3-1FXS2/3TX1 943 838-101 1 x 100 Mbps SM SC, 3x RJ45

SINGLEMODE MM 3-4FXS2 943 836-101 4 x 100 Mbps SM SC

SINGLEMODE MM 3-1FXL2/3TX1 943 763-101 1 x 100 Mbps SM, SC Long Haul, 3 x RJ45

SINGLEMODE MM3-1FXLH+/3TX1 943 930-101 1 x 100 Mbps SM SC Long Haul+, 3x RJ45

SINGLEMODE MM 3-1FXS2/3TX1-EEC 943 838-151 1 x 100 Mbps SM SC, 3 x RJ45, ext. temp.*

MICE Modules: SPECIAL PURPOSE 1588 Compliant

Type Part No. Order No. Ports/Speed

REALTIME MM3-4TX1-RT 943 117-001 4 x RJ45, IEEE1588 realtime modules

REALTIME MM3-2FXM2/2TX1-RT 943 117-002 2 x 100 Mbps MM SC, 2x RJ45,

REALTIME MM3-2FXS2/2TX1-RT 943 117-003 2 x 100 Mbps SM SC, 2x RJ45,

REALTIME MM3-2FLM4/2TX1-RT 943 117-004 2 x 10 Mbps MM ST, 2x RJ45,

REALTIME MM3-4TX1-RT-EEC 943 955-001 4 x RJ45, railway certiﬁcations EN 50155, EN 50121-4

REALTIME MM3-2FXM2/2TX1-RT-EEC 943 955-002 2 x100 Mbps MM SC, 2 x RJ45, IEEE1588, railway certiﬁcations EN 50155, EN 50121-4

REALTIME MM3-2FXS2/2TX1-RT-EEC 943 955-003 2 x 100 Mbps SM SC, 2x RJ45, IEEE 1588, railway certiﬁcations EN 50155, EN 50121-4

AUI MM3-2AUI 943 840-101 2x AUI SUB-D 15-pin male D-sub

IP67 MM3-4TX5 943 841-101 4 x M12 socket (D-code), for connectors see OCTOPUS family

POE MM22-T1T1T1T1SAHH 943 938-002 4 x RJ45 PoE (externeal PoE power supply)

SFP MM20-Z6Z6Z6Z6SAHH 943 938-001 4 x 100 Mbps SFP, for MS20, MS30 and MS4128

Managed Modular DIN Rail Mount Switches

MICE Modules: GIGABIT

Type Part No. Order No. Ports/Speed

GIGABIT MM 4-2TX/SFP 943 622-001 2 x Gigabit RJ45 2 SFP Slots** for MS30 and MS4128

GIGABIT MM 4-4TX/SFP 943 010-001 4 x Gigabit RJ45 4 SFP Slots** for MS4128 only

NOTE: **For every SFP used, one copper port is lost. SFPs need to be purchased separately.

NOTE: All OpenRail switches have the ability of being

designed into a redundant ring with 300ms resiliency

at 100 Mbps and 30 ms at 1000 Mbps (each with 100

switches in the ring).

All OpenRail switches also have the capability to support

redundant ring coupling. Compact and modular switch

capabilities are fully compatible in a network.

Example of managed compact and modular switches used in a HIPER-Ring featuring Fast and Gigabit Ethernet.

HIPER-Ring

Gigabit Ethernet HIPER-Ring

Gigabit Ethernet

RS30

MS30

MS4128

MS30

RS20

MS20

Robots

HIPER-Ring

Fast Ethernet

RS20

MS4128 MS4128

Workstation

MS4128

MS30

NOTE: *All media modules are availble (special order) with extended temperature range of – 40° C to +70°C.

1.717.217.2299www.hirschmann-usa.com 15

Management Software Functionality

L2: Enhanced L2: Professional L3: Enhanced L3: Professional Plug & Play

sssDHCP server per port

sssIP address conﬂict detection

sssMultiple stored ﬁrmware versions

ssssAutomatic conﬁguration undo

ssssDHCP relay agent, option 82

ssssExternal ﬂash memory

Security

sssRadius - IEEE 802.1x

sssSSH

sssSNMP v2c, v3 encryption

sssPort security IP, multiple addresses

ssssPort security MAC

ssssPort security IP

ssssSNMP v2c, v3 (password encryption)

Switching

sssGVRP

sssMulticast GMRP – 802.1D

sssOptimized for video multicasting

ssssStatic VLAN, Q-MIB – 802.3ac, 802.1Q

ssssBroadcast, unicast, multicast limiter

ssssMulticast IGMP querier

ssssMulticast IGMP snooping

ssssPort priority – 802.1D/p

Redundancy

sssLink aggregation – 802.3ad

ssssRSTP – 802.1w

ssssRedundant net coupling

ssssHIPER-Ring redundancy manager

ssssHIPER-Ring

ssssMRP-Ring

Industrial Proﬁle

ssssPROFINET Proﬁle

ssssEtherNet/IP Proﬁle

Routing

sDVMRP/PIM DM multicast routing

sOSPF

ssRIP v1/v2

ssStatic routing

ssVRRP, HiVRRP (<500 ms) router redundancy

ssLayer 3 ACL

Diagnostic

sssText conﬁguration ﬁle

sssCable diagnostic TX

sssAutomatic conﬁguration check

ssssHUB functionality (disable learning)

ssssSyslog

ssssLog ﬁle

ssssPort mirroring

ssssTopology discovery 802.1ad

Enjoy the beneﬁts of direct, hassle-free conﬁguration with our online tool at: www.conﬁgurator.hirschmann.com

Management Software Functionality

Technical Tips and Tools

An excellent documentation resource for

everything pertaining to Hirschmann’s

hardware and software can be found on our

ftp server - ftp.hirschmann-usa.com

The different management versions are listed

and explained on the tabel to the right.

Alternatively, you may also access our online

switch at http://demo.hirschmann-usa.com

to see the management functionality live in

one of our switches.

Please note that you will need the Java Runtime

Environment (JRE) to view the content. If you experience

difcilties accessing the switch, it may be due to the policies

of some companies to have their rewalls block this two-

way data trafc.

EtherNet/IP (Allen-Bradley) and PROFINET

(Siemens) users please note that Hirschmann’s

managed switches are easily integrated into

the respective PLCs/HMIs, enabling switch

management from/by the PLC/HMI. The

seamless integration also provides network/

switch status to the PLC/HMI for alarming and

network statistics. Please refer to page 32 for

more information on the industrial proles

Enjoy the benets of direct, hassle-free

conguration with our online tool at

www.conﬁgurator.hirschmann.com

1.717.217.229916 www.hirschmann-usa.com

Entry-level Unmanaged Switches

SPIDER Family

All ports are 10/100 Mbps. Now available with POE. The SPIDER family of switches provides users

with an economical, yet highly reliable Ethernet switch. All copper/RJ45 ports are 10/100 auto-

negotiating and auto-crossing – the SPIDERS will work with either patch or cross-over cables. The

ber ports are all 100 Mbps and available in multimode (MM) and singlemode (SM) with either SC

or ST sockets. Unless specied, all switches are rated 0° C to +60° C, have a 24 VDC power input via

pluggable terminal block and have an average MTBF exceeding 100 years.

Feature-rich Unmanaged Switches

RS2 Switches

These switches offer advanced features such as redundant power inputs and most offer fault

relay (triggerable by loss of power and/or port-link). Standard features include 10/100 auto-

negotiating and auto-crossing (either patch or cross-over cables will work in the ports), a 0° C to

+60° C operating range, a 24 VDC power input via pluggable terminal block and have an average

MTBF exceeding 100 years. All of the multimode (MM) and singlemode (SM) ber optic ports are

100 Mbps and are available in a variety of connector options.

Unmanaged DIN Rail Mount Switches

ALL COPPER/RJ45 - SPIDER FAMILY / Entry-level Unmanaged Switches

Part No. Order No. Ports

SPIDER 3TX-TAP 943 899-001 3 x RJ45

SPIDER 5TX 943 824-002 5 x RJ45

SPIDER 5TX EEC 943 824-102 5x RJ45

SPIDER II 8TX 943 957-001 8 x RJ45

SPIDER II 8TX EEC 943 958-001 8 x RJ45

SPIDER II 8TX POE 942 008-001 8 x RJ45 and 4 X POE, with metal housing and 24 VDC input

COPPER/RJ45 and FIBER - SPIDER FAMILY / Entry-level Unmanaged Switches

Part No. Order No. Ports

SPIDER 4TX/1FX 943 221-001 4 x RJ45 and 1 x MM, SC

SPIDER 4TX/1FX EEC 943 221-101 4 x RJ45 and 1 x MM, SC

SPIDER 4TX/1FX-S EEC 943 914-001 4 x RJ45 and 1 x MM, ST

SPIDER 4TX/1FX SM EEC 943 880-001 4 x RJ45 and 1 x SM, SC

SPIDER 1TX/1FX 943 890-001 1x RJ45 and 1x MM, SC

SPIDER 1TX/1FX EEC 943 927-101 1 x RJ45 and 1 x MM, SC

SPIDER 1TX/1FX-SM 943 891-001 1x RJ45 and 1 x MM, SC

SPIDER 1TX/1FX SM EEC 943 928-001 1 x RJ45 and 1 x SM, SC

SPIDER II 8TX/1FX EEC 943 958-111 8 x RJ45 and 1 x MM, SC

SPIDER II 8TX/1FX-ST EEC 943 958-121 8 x RJ45 and 1x MM, ST

SPIDER II 8TX/2FX EEC 943 958-211 8 x RJ45 and 2 x MM, SC

SPIDER II 8TX/2FX-ST EEC 943 958-221 8 x RJ45 and 2x MM, ST

SPIDER II 8TX/1FX-SM EEC 943 958-131 8x RJ45 and 1x SM, SC

SPIDER II 8TX/2FX-SM EEC 943 958-231 8x RJ45 and 2x SM, SC

FULL GIGABIT - SPIDER FAMILY / Entry-level Unmanaged Switches

Part No. Order No. Ports

SPIDER II Giga 5T EEC 943 962-002 5 x RJ45 (10/100/1000)

SPIDER II Giga 5T/2S EEC 943 963-002 5x RJ45 (10/100/1000), and 2 x SFP Slot (1000)

NOTE: EEC stands for extended environmental conditions (–40°C to + 70° C).

NEW

1.717.217.2299www.hirschmann-usa.com 17

OpenRail Unmanaged Switches

RS20 and RS30 Unmanaged Switches

Hirschmann’s unmanaged OpenRail switches are ideal for applications that are less dependent

upon the features of switch management while maintaining the highest feature-set for an

unmanaged switch:

r 8x, 9 x, 16x, 17 x, 24x and 25 x ports in a 4.25” footprint

r Up to 4x ber ports

r Redundant power inputs via dual 24 VDC

r Fault relay (triggerable by loss of one power input and/or the loss of the link(s) specied)

r 10/100/1000 auto-negotiating and auto-crossing (either patch or crossover cables will work in

the ports)

r Variety of connector options for Multimode (MM) and Singlemode (SM) ber optic ports

r Choice of operating temperatures and conformal coating (standard is 0° C to +60°C, with

–40° C to +70°C also available)

r Variety of approvals including IEC 61850-3, IEEE 1613, EN 50121-4 and ATEX 100a Zone 2

OpenRail Unmanaged DIN Rail Mount Switches

ALL COPPER/RJ45 / RS2 - Feature-rich Unmanaged Switches

Part No. Order No. Ports/Features

RS2-4TX EEC 943 819-001 4 x10/100 Mbps RJ45, link loss alarm, power loss alarm, fault relay output, ext. temp. –40ºC to + 70º C

RS2-5TX 943 732-003 5 x 10/100 Mbps RJ45, rugged die-cast metal housing offering wall-mount option

RS2-TX 943 686-003 8 x 10/100 Mbps RJ45, link loss alarm, power loss alarm, fault relay output

COPPER/RJ45 and FIBER MIX - Feature-rich Unmanaged Switches

Part No. Order No. Ports/Features

RS2-3TX/2FX EEC 943 771-001 3 x10/100 Mbps RJ45 and 2x 100 Mbps MM-SC, link loss alarm, power loss alarm, fault relay output, ext. temp. –40º C to + 70º C

RS2-3TX/2FX-SM EEC 943 772-001 3 x 10/100 Mbps RJ45 and 2 x100 MbpsSM-SC, link loss alarm, power loss alarm, fault relay output, ext. temp. – 40º C to +70º C

RS 2-5TX/FX 943 732-103 4 x 10/100 Mbps RJ45 and 1 x 100 Mbps MM-MTRJ, rugged die-cast metal housing offering wall-mount option

RS 2-4TX/1FX EEC 943 773-001 4 x 10/100 Mbps RJ45 and 1 x 100 Mbps MM-SC, link loss alarm, power loss alarm, fault relay output, ext. temp. – 40º C to +70ºC

RS 2-4TX/1FX-ST EEC 943 119-002 4 x 10/100 Mbps RJ45 and 1 x 100 Mbps MM-ST, link loss alarm, power loss alarm, fault relay output, ext. temp. – 40º C to +70ºC

RS 2-4TX/1FX-SM EEC 943 774-001 4x 10/100 Mbps RJ45 and 1 x 100 Mbps SM-SC, link loss alarm, power loss alarm, fault relay output, ext. temp. – 40º C to + 70º C

ALL COPPER/RJ45 / RS20 - OpenRail Unmanaged DIN Rail Switches

Part No. Order No. Ports/Features

RS20-1600T1T1SDAU 943 434-047 16 x 10/100 Mbps RJ45

MULTIMODE - OpenRail Unmanaged DIN Rail Switches

Part No. Order No. Ports/Features

RS20-0900NNM4TDAU 943 434-058 3 x 100 Mbps MM ﬁber (ST) and 6 x 10/100 Mbps RJ45

RS20-0900MMM2TDAU 943 434-059 3x100 Mbps MM ﬁber (SC) and 6x 10/100 Mbps RJ45

RS20-1600M2T1SDAU 943 434-049 1 x 100 Mbps MM ﬁber (SC) and 15 x 10/100 Mbps RJ45

RS20-1600M2M2SDAU 943 434-048 2 x 100 Mbps MM ﬁber (SC) and 14 x 10/100 Mbps RJ45

RS20-1600S2M2SDAU 943 434-052 1 x 100 Mbps MM ﬁber (SC)1 x 100 Mbps SM ﬁber (SC) and 14 x10/100 Mbps RJ45

RS20-1600L2M2SDAU 943 434-055 1 x 100 Mbps MM ﬁber (SC)1 x100 Mbps Long Haul SM ﬁber (SC) and 14x 10/100 Mbps RJ45

SINGLEMODE - OpenRail Unmanaged DIN Rail Switches

Part No. Order No. Ports/Features

RS20-0900VVM2TDAU 943 434-060 3 x 100 Mbp SM ﬁber (SC) and 6 x 10/100 Mbps RJ45

RS20-1600S2T1SDAU 943 434-051 1x 100 Mbps SM ﬁber (SC) and 15 x 10/100 Mbps RJ45

RS20-1600S2S2SDAU 943 434-053 2 x 100 Mbps SM ﬁber (SC) and 14 x10/100 Mbps RJ45

RS20-1600L2T1SDAU 943 434-054 1x100 Mbps Long Haul SM ﬁber (SC) and 15x 10/100 Mbps RJ45

RS20-1600L2S2SDAU 943 434-056 1 x 100 Mbps Long Haul SM ﬁber (SC) 1x 100 Mbps SM ﬁber (SC) and 14 x10/100 Mbps RJ45

RS20-1600L2L2SDAU 943 434-057 2x 100 Mbps Long Haul SM ﬁber (SC) and 14 x 10/100 Mbps RJ45

RS20-1600S2M2SDAU 943 434-052 1 x 100 Mbps MM ﬁber (SC),1 x 100 Mbps SM ﬁber (SC) and 14 x10/100 Mbps RJ45

RS20-1600L2M2SDAU 943 434-055 1 x 100 Mbps MM ﬁber (SC) 1 x100 Mbps Long Haul SM ﬁber (SC) and 14x 10/100 Mbps RJ45

NOTE: Don’t see what you’re looking for?

Need an unmanaged switch with Gigabit

uplinks? Custom conﬁgure your unman-

aged RS20 or RS30 OpenRail switch

using the conﬁguration table on page 7!

As an example, the below conﬁguration is

a 24-port switch (23 x10/100 RJ45 and

1 x100 Mbps multimode SC). The “U”

designates this as an unmanaged switch.

Please refer to the online OpenRail

Conﬁgurator for online assistance.

RS20-2400M2T1SDAU

1.717.217.229918 www.hirschmann-usa.com

Industrial Workgroup Switches

MACH100 Switches

Hirschmann has expanded its 19” rack switch product portfolio with the release of the MACH100

family, allowing workgroups to be networked by either copper and/or beroptic cable. The

switches are offered in versions with 8 or 24 permanently installed 10/100 Mbps RJ45 Ethernet

ports, or as modular devices with 8 permanent ports and slots for 2 additional 8 port media

modules. Both versions offer two RJ45/SFP Gigabit Combo ports for connection to the network

backbone. The switches are designed for a temperature range of 0° C to +50° C and support a

large range of management and redundancy modes, as well as several functions for conguration

and diagnostics. Further features are fanless cooling as well as an optional power supply. As a

result the devices of the MACH100 family offer a high level of security and exibility for Ethernet

network design or upgrade in production-related areas.

Über-Rugged™ Switches

MACH1000 - 19“ Rack-mount Switches

Why Über-Rugged™?

This is the only way to describe a switch that goes above and beyond the already rugged

capabilities of Hirschmann’s switches by being extremely immune to noise and able to provide

maximum uptime in extreme environmental conditions. The MACH1000 features a 24-port custom

congurable/modular design that is also available with two or four additional Gigabit uplink (RJ45

and/or SFP for ber) and PoE ports.

Workgroup Rack-mount Switches

Über-Rugged™ Rack-mount Switches

MACH100 MODULAR

Part No. Order No. Ports

MACH102-8TP 943 969-001 8 x 10/100BASE-TX RJ45 ports, 2x GE combo ports (100 or 1000 MBps SFPs) and

2 x 8 port media module slots

MACH102-8TP-R 943 969-101 Same as -001 above, but w/ redundant 110/220 VAC power supply

FIXED PORTS

Part No. Order No. Ports

MACH102-8TP-F 943 969-201 8 x 10/100BASE-TX RJ45 ports and 2 x GE combo ports (100 or 1000 MBps SFPs)

MACH102-8TP-FR 943 969-301 Same as -201, but w/ redundant 110/220 VAC power supply

MACH102-24TP-F 943 969-401 24 x 10/100BASE-TX RJ45 ports and 2 x GE combo ports (100 or 1000 MBps SFPs)

MACH102-24TP-FR 943 969-501 Same as -401, but w/ redundant 110/220 VAC power supply

MEDIA MODULES (2 Max. per Modular MACH 100)

Part No. Order No. Ports

M1-8TP-RJ45 943 970-001 8 x 10/100BASE-TX, RJ45 media module

M1-8MM-SC 943 970-101 8 x 100BASE-FX MM, SC media module

M1-8SM-SC 943 970-201 8 x 100BASE-FX SM, SC media module

M1-8SFP 943 970-301 8 x 100BASE-X SFP media module

FAST 30ms

HiPer-Ring

r Fanless design

r Hot-swappable modules

r Optional redundant power inputs

r ACA 21 USB Backup

r Hirschmann CLI and WEB interface

r L2P rmware - DHCP Option 82,

HiDiscovery, HIPER-Ring, MRP, RSTP, disable

learning, SNTP, Industrial Proles (EtherNet/

IP, PROFINET)

r Fully integrated in Industrial HiVision

r Temperature range: 0° C to +50° C

NOTE: *SFPs need to be purchased separately (see

accessories on page 23 for SFPs).

r 19” rack-mount, fanless design

r –40° C to +85° C standard operating

temperature (conformal coating available)

r Exceeds IEC 61850-3 and IEEE 1613

standards for electric power substation

communication equipment

r Exceeds NEMA TS-2 standard for trafc

control equipment

r Redundant 24/36/48 VDC or 120/250 VDC

and 110/230 VAC

r Extremely efcient components for minimal

heat generation and high MTBF (mean time

between failure)

r Ultra-fast ring recovery time < 10 ms

300ms

HiPer-Ring

1.717.217.2299www.hirschmann-usa.com 19

Über-Rugged™ Rack-mount Switches - Conﬁgurations

MAR1030-CCMMMMMMVVZZTTTTTTTTTTTT99UGCHPHH04.0. / MACH1000 19” Switch

MAR1030-

MM 1 + 2

MM 3 + 4

MM 5 + 6

VV 7 + 8

ZZ 9 + 10

TT 11 + 12

TT 13 + 14

TT 15 + 16

TT 17 + 18

TT 19 + 20

TT 21 + 22

99 23 + 24

04.0.

Design/Model

MAR1020 Fast Ethernet uplink

MAR1030 Gigabit Ethernet uplink

MAR1022 Fast Ethernet uplink with 4 ports PoE

MAR1032 Gigabit Ethernet uplink with 4 ports PoE

MAR1120 Fast Ethernet uplink with ports at the back

MAR1130 Gigabit Ethernet uplink with ports at the back

MAR1122 Fast Ethernet uplink with ports at the back and 4 ports PoE

MAR1132 Gigabit Ethernet uplink with ports at the back and 4 ports PoE

Gigabit Ethernet Ports

99 Not present

CC 2 ports combo (2 x 10/100/1000TX or 2 x GE SFP)

4O 4 ports GE SFP

4T 4 ports 10/100/1000TX

OT 2 ports GE SFP and 2 ports 10/100/1000TX

Fast Ethernet Ports - 1+2·3+4·5+6·7+8·9+10·11+12·13+14·15+16·17+18·19+20·21+22·23+24

TT 2 x Twisted Pair (TX) 10/100 Mbps RJ45

RR 2 x Twisted Pair (TX) 10/100 Mbps M12

FF 2 x Multimode 10 Mbps ST

MM 2 x Multimode 100 Mbps SC

JJ 2 x Multimode 100 Mbps MTRJ

NN 2 x Multimode 100 Mbps ST

VV 2 x Singlemode 100 Mbps SC

UU 2 x Singlemode 100 Mbps ST

LL 2 x Singlemode LH 100 Mbps SC

GG 2 x Singlemode LH+ 100 Mbps SC

ZZ 2 x SFP Slot 100 Mbps SFP

99 Not present

Approvals

HcUL508, cUL1604 Class 1 Div2, German Lloyd, IEC 61850-3, IEEE1613, EN 50121

Software Version

PProfessional: extended diagnostics, redundancy and security features

Conﬁguration

HStandard PPre-setting/pre-conﬁgure EEthernet/IP pre-setting

OEM-Type

HStandard XCustomer speciﬁc

Software Release

XCurrent software release 04.0 example: former software release

Temperature Range

SStandard 0° C up to + 60° C

UExtended – 40° C up to + 85° C

FExtended – 40° C up to + 85° C inclusive Conformal Coating

Power Supply 1

C24/36/48 VDC (spring clip) G110/250 VDC/110/230 VAC (spring clip)

L24/36/48 VDC (plug-in connector) M110/250 VDC/110/230 VAC (plug-in connector)

Power Supply 2

C24/36/48 VDC (spring clip) G110/250 VDC/110/230 VAC (spring clip)

L24/36/48 VDC (plug-in connector) M110/250 VDC/110/230 VAC (plug-in connector)

9not present

Required Field Optional NOTE: Use the Hirschmann OpenRail system to conﬁgure your substation switch: www.conﬁgurator.hirschmann.com

1.717.217.229920 www.hirschmann-usa.com

High Density Layer 2/3 Gigabit

Backbone Switch

MACH400 Switch

Capable of providing as many as 48 Gigabit ports and three 10Gigabit ports, the MACH4000 is the

ultimate high-density Layer 2/3 Gigabit backbone switch for mission-critical applications requiring

high-availability and high port densities.

The MACH4000 comes standard with up to 16 + ports and can be congured with as many as 32

additional ports (via hot-plug copper/ber modules).

Gigabit Backbone Layer 2/3 Rack-mount Switches

FAST 30ms

HiPer-Ring

Standard features include:

r 19” rack-mount

r Two user-denable fault relays

r Hot-swappable media modules for

continuous operation – up to 4 Media

Modules (8 ports max. each)

r HIPER-Ring, redundant coupling and link

aggregation capable

r Flexible power options: 100 –240 VAC, 24

VDC and 48 VDC

r 0°C to + 60°C operating temperature

MACH4000 - High Density Layer 2/3 Gigabit Backbone Switch

Part No. Order No. Ports

MACH4002 48+4G-L2P 943 859-101 Layer 2, Professional Management chassis

MACH4002 48+4G-L3E 943 859-201 Layer 3, Enhanced Management chassis

MACH4002 48+4G-L3P 943 859-301 Layer 3, Professional Management chassis

rFixed ports: 4x Gigabit Ethernet combo ports*

(1000 Mbps SFP socket or 10/100/1000 Mbps RJ45) and 16x RJ45 10/100 Mbps

rMedia modules: 4 sockets (8 ports max each) for total 32 ports 10/100 Mbps

(Media modules sold separately – see page 21. For software functionality – see page 15)

MACH4002-24G-L2P 943 916-101 Layer 2, Professional Management chassis

MACH4002-24G-L3E 943 916-201 Layer 3, Enhanced Management chassis

MACH4002-24G-L3P 943 916-301 Layer 3, Professional Management chassis

rFixed ports: 8x Gigabit Ethernet combo ports*

(SFP dual speed socket or TP 10/100/1000 Mbps)

rMedia modules: 2x sockets (8 ports max each) for total 16 ports 10/100/1000 Mbps

(Media modules sold separately – see page 21. For software functionality – see page 15)

MACH4002-24G+3X-L2P 943 915-101 Layer 2, Professional Management chassis

MACH4002-24G+3X-L3E 943 915-201 Layer 3, Enhanced Management chassis

MACH4002-24G+3X-L3P 943 915-301 Layer 3, Professional Management chassis

rFixed ports: 3x 10Gigabit Ethernet XFP socket and 8 Gigabit Ethernet ports

TP/RJ45 10/100/1000 Mbps

rMedia modules: 2x sockets (8 ports max each) for total 16 ports 10/100/1000 Mbps

(Media modules sold separately – see page 21. For software functionality – see page 15)

MACH4002-48G-L2P 943 911-101 Layer 2, Professional Management chassis

MACH4002-48G-L3E 943 911-201 Layer 3, Enhanced Management chassis

MACH4002-48G-L3P 943 911-301 Layer 3, Professional Management chassis

rFixed ports: 16 Gigabit Ethernet (8 Gigabit Ethernet combo ports* 100/1000 Mbps

SFP dual speed socket or 10/100/1000 Mbps + 8 Gigabit 10/100/1000 Mbps RJ45)

rMedia modules: Four sockets (8 ports max each) for total 32 ports 10/100/1000 Mbps

(Media modules sold separately – see page 21. For software functionality – see page 15)

MACH4002-48G+3X-L2P 943 878-101 Layer 2, Professional Management chassis

MACH4002-48G+3X-L3E 943 878-201 Layer 3, Enhanced Management chassis

MACH4002-48G+3X-L3P 943 878-301 Layer 3, Professional Management chassis

rFixed ports: Three 10Gigabit Ethernet XFP sockets and 16 Gigabit Ethernet ports

(100/1000 Mbps SFP dual speed socket or 10/100/1000 Mbps RJ45)

rMedia modules: Four sockets (8 ports max each) for total 32 ports 10/100/1000 Mbps

(Media modules sold separately – see page 21. For software functionality – see page 15)

NOTE: *Fan module is included in each chassis. Please

purchase media modules and power supply separately.

See Accessories for SFPs + XFP. Conﬁguration will dictate

ﬁnal port count and media type.