AC/DC 35W Enclosed Switching Power Supply LM35-10Dxx Series FEATURES RoHS Universal 85 - 264VAC or 120 - 373VDC Input voltage Operating ambient temperature range: -30 ~ +70 High efficiency, high reliability and long lifetime LED indicator for power on Output short circuit, over-current, over-voltage protection Withstand 300VAC surge input for 5s High I/O isolation test voltage up to 3000VAC Safety according to IEC/EN/UL62368, EN60335, GB4943 Emissions compliant to CISPR32/EN55032 CLASS B Withstand 5G vibration test Operating altitude up to 5000m This LM35-10Dxx series of power converter design features dual output versions, which can independently supply 2 different loads in the system. The products can be used in harsh working environments with an ambient temperature range from -30C to +70C, without the need of a fan for further heat dissipation. In addition, the converters EMC immunity performance meets the requirements of IEC61000 standard and meet emission standard CISPR32/EN55032, class B without any external components, thus providing excellent EMC protection. The products also meet IEC/EN/UL62368/EN60335/GB4943 safety standards. The converters integrate a variety of protection features and offer a high-performance to low-cost ratio providing the best power solution for a variety of industries such as industrial control equipment, instrumentation and smart home and building equipment application. Selection Guide Certification Output Power Part No. LM35-10D0512-10 CE Pending of UL LM35-10D0524-10 Nominal Output Voltage and Current Vo1/Io1 Vo2/Io2 32W +5V/4.0A 35W +5V/2.2A Working Current Range* Io1 Io2 +12V/1.0A 0.4-5.0A 0.1-1.5A +24V/1.0A 0.22-4.0A 0.1-1.3A Efficiency* (%) Typ. Max. Capacitive Load (F) Vo1 Vo2 81 4000 1000 83 2200 1000 Note:1.* Working current range: If any one of the 3 outputs arrive at the maximum current, the total output power cannot exceed the rated power and working time < 3s. 2.* The typical efficiency tested under input voltage at 230VAC. Input Specifications Item Input Voltage Range Operating Conditions Min. Typ. Max. Unit AC input 85 -- 264 VAC DC input 120 -- 373 VDC 47 -- 63 Hz 115VAC -- -- 0.75 230VAC -- -- 0.5 115VAC -- 30 -- -- 50 -- Input Frequency Input Current Inrush Current leakage current Cold start 230VAC 240VAC A 2.0mA Hot Plug Unavailable Output Specifications Item Operating Conditions Output Voltage Accuracy Full load range Vo1 Vo2 Load Regulation Full load 10% - 100% load (Balanced load) Vo2 Max. -- -- 2.0 -- 8.0 -- LM35-10D0524-10 -4.0 -- +8.0 -- 0.5 -- LM35-10D0512-10 -- 1.5 -- LM35-10D0524-10 -- 1.5 -- -- 0.5 -- -- 5.0 -- Vo1 Vo2 Typ. LM35-10D0512-10 Vo1 Line Regulation Min. LM35-10D0512-10 2019.05.13-A/1 Unit % % % Page 1 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation AC/DC 35W Enclosed Switching Power Supply LM35-10Dxx Series LM35-10D0524-10 20MHz bandwidth (peak-peak value) Ripple & Noise* 5.0 -- -- 80 -- LM35-10D0512-10 -- 150 -- LM35-10D0524-10 -- 150 -- -- 0.03 -- %/ Vo1 Vo2 -- Temperature Coefficient mV Voltage Adjustable Range Vo1* Rated input voltage 4.75 -- 5.50 VDC Start-up Delay Time Rated input voltage -- -- 2.0 S Output Voltage Rise Time The output Vo1/Vo2 rise time from 10%Vo to 90%Vo at rated voltage 115V/60Hz & 230V/50Hz, rated output load, ambient temperature -- -- 30 115VAC -- 5 -- 230VAC -- 30 -- Hold-up Time mS Refer to the working current range Minimum Load Short Circuit Protection Recovery time <5s after the short circuit disappear Over-current Protection 2 outputs with equal-scale load Hiccup, continuous, self-recovery 110%-220%Io, self-recovery 5.75VDC Vo16.75VDC, output clamped Over-voltage Protection Note: 1.*The "Tip and barrel method" is used for ripple and noise test, (47uF electrolytic capacitor and 104 ceramic capacitor) please refer to AC-DC Converter Application Notes for specific information. 2.*When Vo1 working in the adjustable range, the output power please refer to power derating curve and should not be exceed the rated output power. General Specifications Item Isolation Voltage Insulation Resistance Min. Typ. Output-Output Operating Conditions 500 -- -- Input - Output 3000 -- -- 2000 -- -- Output - 500 -- -- Input - Output 100 -- -- 100 -- -- 100 -- -- -30 -- +70 -40 -- +85 10 -- 95 85VAC - 115VAC 0.667 -- -- 115VAC - 264VAC 0 -- -- 120VDC - 160VDC 0.5 -- -- 160VDC - 373VDC 0 -- -- 2.5 -- -- Input - Input - Electric Strength Test for 1min, leakage current <10mA At 500VDC Output - Operating Temperature Refer to derating curve Storage Temperature Storage Humidity Non-condensing Input voltage derating Power Derating Operating temperature derating Unit VDC VAC M %RH %/VAC %/VDC %/ Meet IEC/EN/UL62368, EN60335, GB4943 Safety Standard CLASS I Safety Class MTBF +50 ~ +70 Max. MIL-HDBK-217F@25 >300,000 h Physical Specifications Case Material Metal (AL1100, SGCC) Dimension 99.00 x 97.00 x 30.00 mm Weight 210g (Typ.) Cooling Method Free air convection 2019.05.13-A/1 Page 2 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation AC/DC 35W Enclosed Switching Power Supply LM35-10Dxx Series EMC Specifications Emissions Immunity CE CISPR32/EN55032 CLASS B RE CISPR32/EN55032 CLASS B Harmonic current IEC/EN61000-3-2 CLASS A ESD IEC/EN61000-4-2 Contact 6KV /Air 8KV Perf. Criteria A RS IEC/EN61000-4-3 10V/m perf. Criteria A EFT IEC/EN61000-4-4 2KV perf. Criteria A Surge IEC/EN 61000-4-5 Line to Line 2KV/Line to Ground4KV perf. Criteria A CS IEC/EN61000-4-6 10 Vr.m.s perf. Criteria A Voltage dips, short interruptions and voltage variations immunity IEC/EN61000-4-11 0%,70% perf. Criteria B Product Characteristic Curve NoteWith an input voltage between 85 -115VAC and a DC input between 120-160VDC the output power must be derated as per the temperature derating curves; This product is suitable for applications using natural air cooling; for applications in closed environment please consult Mornsun FAE. 2019.05.13-A/1 Page 3 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation AC/DC 35W Enclosed Switching Power Supply LM35-10Dxx Series Dimensions and Recommended Layout Note: 1. For additional information on Product Packaging please refer to www.mornsun-power.com. Packaging bag number: 58220066; 2. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25, humidity<75%RH with nominal 3. input voltage and rated output load; The ambient temperature derating of 5/1000m is needed for operating altitude greater than 2000m; 4. 5. All index testing methods in this datasheet are based on our company corporate standards; In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability; 6. We can provide product customization service, please contact our technicians directly for specific information; 7. Products are related to laws and regulations: see "Features" and "EMC"; 8. The out case needs to be connected to PE of system when the terminal equipment in operating; 9. Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified units. 10. The power supply is considered a component which will be installed into a final equipment. All EMC tests should be confirmed with the final equipment. Please consult our FAE for EMC test operation instructions. Mornsun Guangzhou Science & Technology Co., Ltd. Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Huangpu District, Guangzhou, P. R. China TTel: 86-20-38601850 Fax: 86-20-38601272 E-mail:info@mornsun.cn www.mornsun-power.com 2019.05.13-A/1 Page 4 of 4 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation