Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE
ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Page 1 of 2
Raychem, TE connectivity, TE connectivity (logo), and TE (logo) are trademarks.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: 1-800-227-8816
Fax: 1-650-361-6297
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL B E OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
© 2005-2014 Tyco Electronics Corporation. All rights reserved.
Title SPECIFICATION CONTROL DRAWING SCD FLTW+0311
GENERAL PURPOSE HOOKUP WIRE, MODIFIED POLYESTER-INSULATED, 600 VOLT Date 12-4-14 Revision K
The complete requirements for procuring the wire described herein shall consist of this document and the issue in effect of
Raychem Specification WCD 3106, UL Subject 758, Style 10208, File E303150, and carries UL labels to this effect.
CONDUCTOR - TIN-COATED COPPER INSULATION - FLAME RETARDED,
MODIFIED POLYESTER
CONSTRUCTION DETAILS
PART NUMBER
1/
WIRE
SIZE
(AWG)
CONDUCTOR
STRANDING
(number x AWG)
NOMINAL
CONDUCTOR
DIAMETER
(inch) (mm)
FINISHED WIRE
MAXIMUM
RESISTANCE
AT 20°C
(ohms/1000 ft.)
(ohms/km)
DIAMETER
(inch) (mm) NOMINAL
WEIGHT
(lbs/1000 ft.)
(kg/km)
MINIMUM NOMINAL MAXIMUM
FLTWB0311-30-* 30 7 x 38 .012 (.305) 116. (381.) .025 (.635) .027 (.686) .029 (.737) .62 (.92)
FLTWB0311-28-* 28 7 x 36 .015 (.381) 72.8 (239.) .028 (.711) .030 (.762) .032 (.813) .86 (1.28)
FLTWC0311-28-* 28 19 x 40 .015 (.381) 72.8 (239.) .029 (.737) .031 (.787) .033 (.838) .91 (1.35)
FLTWC0311-26-* 26 19 x 38 .019 (.483) 45.8 (150.) .032 (.813) .034 (.864) .036 (.914) 1.3 (1.93)
FLTWC0311-24-* 24 19 x 36 .024 (.610) 28.7 (94.2) .038 (.965) .040 (1.02) .042 (1.07) 1.9 (2.83)
FLTWC0311-22-* 22 19 x 34 .030 (.762) 18.1 (59.4) .045 (1.14) .047 (1.19) .049 (1.24) 2.8 (4.17)
FLTWC0311-20-* 20 19 x 32 .038 (.965) 11.4 (37.4) .053 (1.35) .055 (1.40) .057 (1.45) 4.2 (6.25)
FLTWC0311-18-* 18 19 x 30 .047 (1.19) 7.15 (23.5) .063 (1.60) .065 (1.65) .067 (1.70) 6.5 (9.67)
FLTWC0311-16-* 16 19 x 29 .053 (1.35) 4.82 (15.8) .069 (1.75) .072 (1.83) .075 (1.91) 8.2 (12.2)
FLTWC0311-14-* 14 19 x 27 .066 (1.68) 3.05 (10.0) .085 (2.16) .089 (2.26) .093 (2.36) 12.7 (18.9)
FLTWD0311-14-* 14 37 x 30 .068 (1.73) 3.22 (10.6) .087 (2.21) .091 (2.31) .095 (2.41) 14.7 (21.9)
FLTWD0311-12-* 12 37 x 28 .085 (2.16) 2.01 (6.59) .104 (2.64) .108 (2.74) .112 (2.84) 19.4 (28.9)
FLTWD0311-10-* 10 37 x 26 .107 (2.72) 1.26 (4.13) .127 (3.23) .131 (3.33) .135 (3.43) 30.8 (45.8)
SPECIFICATION CONTROL DRAWING Page
2 of 2
Revision
K
SCD
FLTW+0311
WIRE RATINGS AND ADDITIONAL RE QUIREMENTS
TEMPERATURE RATING: 135°C
VOLTAGE RATING: 600 volts (rms) at sea level
INSULATION ELONGATION AND TENSILE STRENGTH:
Elongation, 230% (minimum)
Tensile Strength, 5200 lbf/in2 (minimum)
INSULATION FLAWS:
Spark Test, 6.0 kV (rms)
Impulse Dielectric Test, 8.0 kV (peak)
INSULATION THICKNESS: .005 inch (minimum), .006 inch (minimum avera ge )
SHRINKAGE: 125°C for 1 hour, 0.125 in. (maximum) per end
THERMAL STABILITY: 167°C for 168 hours
Elongation Retention, 75% (minimum)
Tensile Strength Retention, 55% (minimum)
VOLTAGE WITHSTAND (Post Environmental): 1500 volts (rms), 60 Hz
1/ PART NUMBER:
The "+" in the part number in the upper right hand corner of pages 1 and 2 shall be replaced with
a letter designator to define conductor stranding (see part numbers in table).
B = 7 Strands C = 19 Strands D = 37 Strands
The "*" in the part numbers on page 1 shall be repl aced by a color code designator.
Example: AWG 26, 19 strands, white: FLTWC0311-2 6-9
AWG 26, 19 strands, white with a black stripe: FLTWC031 1-26-90
1/ See footer section of page 1
