SPECIFICATION CONTROL DRAWING Product Revision Product Name Product Dimensions D-108-00 F D-108-01 F D-108-02 E D-108-03 F L MAX oA min oB min 17.25 (0.680) 17.25 (0.680) 17.25 (0.680) 20.5 (0.810) 1.9 (0.075) 2.8 (0.110) 4.4 (0.175) 7.1 (0.280) 2.4 (0.095) 3.15 (0.125) 5.0 (0.200) 7.6 (0.300) MATERIAL 1. INSULATION SLEEVE: HEAT-SHRINKABLE, RADIATION CROSS-LINKED POLYVINYLIDENE FLOURIDE. TRANSPARENT BLUE. 2. SOLDER PREFORM WITH FLUX: Solder: Sn96 Ag4 per ANSI J-STD-006. Flux: ROL1 per ANSI J-STD-004. 3 & 4. MELTABLE INSERTS: Polyolefin-based thermoplastic. Color : red. NOTES A. The parts covered by this SCD are for use in attaching a ground wire to the shield of a cable. They may be used on cables rated for at least 135C minimum, having silver plated copper shields and meeting the dimensional criteria shown in the table. B. Parts will meet requirements of Raychem specification RT-1404 and National Aerospace Standard NAS-1747 when installed per Raychem-approved convection or infrared tools in accordance with Raychem assembly procedure RCPS-100-70. TEMPERATURE RATING: -55C to +175C. Raychem THERMOFIT DEVICES Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate 0.00 N/A the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A TITLE: SOLDERSLEEVE SHIELD TERMINATOR DOCUMENT NO. : D-108-00/-01/-02/-03 DCR NUMBER: REPLACES: D980867 DRAWN BY: DATE: PROD. REV. DOC ISSUE: M. FORONDA 04/09/98 SEE TABLE 3 If this document is printed it becomes uncontrolled. Check for the latest revision. SCALE: None D961392 SIZE: A SHEET: 1 of 1