856882
358.4 MHz SAW Filter
Data Sheet: Rev - 7/26/11
- 1 of 8 -
Disclaimer: Subject to change without notice e
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network ®
Applications
General Purpose Wireless
Wireless Infrastructure
3G, 4G, Multistandard
Functional Block Diagram Bal/Bal
Top view
Functional Block Diagram Bal/SE
Top view
12
11
10
4
5
6
8
97
3
2
1Output +
Input +
Gnd Gnd Gnd
Gnd Gnd Gnd
Gnd Gnd
Input -
Output -
12
11
10
4
5
6
8
97
3
2
1Output
Input +
Gnd Gnd Gnd
Gnd Gnd Gnd
Gnd Gnd
Input -
Gnd
Product Features
Usable bandwidth 39.6 MHz
Low loss
High attenuation
Low EVM
Balanced-Balanced or Balanced-Single ended operation
Ceramic Surface Mount Package (SMP)
Small Size: 7.01 x 5.51 x 1.70 mm
Excellent power handling
Hermetic RoHS compliant, Pb-free
Pin Configuration
Pin # Bal/Bal
Description
10
Input +
12
Input -
4
Output +
6
Output -
1,2,3,5, 7, 8, 9, 11
Ground
Pin # Bal/SE
Description
10
Input +
12
Input -
4
Output
1,2,3,5,6, 7, 8, 9, 11
Ground
General Description
The 856882 is a high performance IF SAW filter developed
for 4G and Multistandard infrastructure applications.
It features low loss with excellent attenuation, and is designed
to be used with multiple impedance values and configurations.
The filter is developed for excellent in-band characteristics in
order to minimize system bit-error rates.
This device is RoHS compliant and Pb-free.
Ordering Information
Part No.
Description
856882
packaged part
856882-EVB
evaluation board
Standard T/R size = 3000 units/reel.
Please specify the evaluation board impedance:
1. Balanced 200Ω input, Balance 200Ω output.
2. Balanced 200Ω input, Single-ended 50Ω output.
3. Balanced 100Ω input, Balance 100Ω output.
856882
358.4 MHz SAW Filter
Data Sheet: Rev - 7/26/11
- 2 of 8 -
Disclaimer: Subject to change without notice e
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network ®
Specifications
Electrical Specifications (1, 2)
Specified Temperature Range: (3) -33 to +85 ºC
Parameter (4)
Conditions
Min
Typical (5)
Max
Units
Center Frequency
-
358.4
-
MHz
Insertion Loss
At 358.4 MHz
-
9.5
11.5
dB
Amplitude Variation(6)
338.6 – 378.2 MHz
-
0.35
1.0
dB p-p
Absolute Group Delay
At 358.4 MHz
-
0.43
0.5
µs
Group Delay Variation(6)
338.6 – 378.2 MHz
-
21
50
ns p-p
Time side-lobe response attenuation
(1.0 – 500 µs)
40
45
-
dB
IIP3
Tones 5 MHZ separated power
> 5dBm per tone
45
50
-
dBm
EVM(7)
-
1.3
3
%
Absolute Attenuation (8)
10.0 – 253.4 MHz
253.4 – 270.0 MHz
270.0 – 294.4 MHz
294.4 – 312.4 MHz
312.4 – 326.4 MHz
388.4 – 404.4 MHz
404.4 – 422.4 MHz
422.4 – 463.4 MHz
463.4 – 660.0 MHz
660.0 – 780.0 MHz
780.0 – 3000 MHz
55
53
55
40
25
30
40
45
55
35
55
61
56
58
53
44
37
49
52
66
38
62
-
-
-
-
-
-
-
-
-
-
-
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
Input/Output Return Loss
338.6 – 378.2 MHz
10
12
-
dB
Source/Load Impedance (9)
-
200, 100, 50
-
Notes:
1. All specifications are based on the TriQuint schematics for the different impedances shown on page 3, 4 & 5.
2. An external impedance matching network with ±2% tolerance will be necessary to achieve the proposed specifications.
3. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature.
4. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances.
5. Typical values are based on average measurements at room temperature.
6. These Variations are defined as the difference between the lowest loss and the highest loss within the defined frequency points.
7. Measured with an RRC filtered QPSK modulated signal with a BW of 3.84 MHz placed anywhere within 338.6 to 378.2 MHz.
8. Relative to insertion loss at center frequency.
9. See the impedance options in the ordering information section on page 1.
856882
358.4 MHz SAW Filter
Data Sheet: Rev - 7/26/11
- 3 of 8 -
Disclaimer: Subject to change without notice e
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network ®
Impedance option #1 – 200 Bal Input, 200 Bal Output
Schematic
200
Balanced
Input
1,2,3,5
7,8,9,11
200
12 4
200
27nH 10 6
5pF
27nH 39pF
39pF
27nH
200
Balanced
Output
Note: Actual matching values may vary due to PCB layout and parasitic
PC Board
Mounting Configuration
856882
TriQuint
JJJYHH
L2
960686
C1 L1 L3
C2
C3
5.71
.99
7.21
1.34 1.34
.99 .28
.28
Notes:
Top, middle & bottom layers: 1 oz copper
Substrates: FR4 dielectric, .031” thick
Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick
Hole plating: Copper min .0008µm thick
Notes:
1. All dimensions are in millimeters.
2. This footprint represents a recommendation only.
Bill of Material
Reference Desg.
Value
Description
Manufacturer
Part Number
C1
5.0 pF
Chip Ceramic, 0603, 5%
Panasonic
ECU-V1H0050CCV
C2
39 pF
Chip Ceramic, 0603, 5%
Panasonic
ECU-V1H390KCV
C3
39 pF
Chip Ceramic, 0603, 5%
Panasonic
ECU-V1H390KCV
L1
27nH
Coil Wire-wound, 0603, 5%
Coillcraft
0603CS-27NXJBC
L2
27nH
Coil Wire-wound, 0603, 5%
Coillcraft
0603CS-27NXJBC
L3
27nH
Coil Wire-wound, 0603, 5%
Coillcraft
0603CS-27NXJBC
SMA
N/A
SMA connector
Johnson Components
142-0701-801
PCB
N/A
3-layer
multiple
960686
856882
358.4 MHz SAW Filter
Data Sheet: Rev - 7/26/11
- 4 of 8 -
Disclaimer: Subject to change without notice e
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network ®
Impedance option #2 – 200 Bal Input, 50 SE Output
Schematic
200
Balanced
Input
1,2,3,5,6
7,8,9,11
200
12 4
50
10
18pF
27nH
100pF 22nH
4.0pF
100pF
50
Single-ended
Output
Note: Actual matching values may vary due to PCB layout and parasitic
PC Board
Mounting Configuration
856882
TriQuint
JJJYHH
5.71
.99
7.21
1.34 1.34
.99 .28
.28
Notes:
Top, middle & bottom layers: 1 oz copper
Substrates: FR4 dielectric, .031” thick
Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick
Hole plating: Copper min .0008µm thick
Notes:
3. All dimensions are in millimeters.
4. This footprint represents a recommendation only.
Bill of Material
Reference Desg.
Value
Description
Manufacturer
Part Number
C1
100 pF
Chip Ceramic, 0603, 5%
Panasonic
ECU-V1H101KCV
C2
100 pF
Chip Ceramic, 0603, 5%
Panasonic
ECU-V1H101KCV
C3
4.0 pF
Chip Ceramic, 0603, 5%
Panasonic
ECU-V1H040CCV
C4
18 pF
Chip Ceramic, 0603, 5%
Panasonic
ECU-V1H0180KCV
L1
27 nH
Coil Wire-wound, 0603, 5%
MuRata
LQW18AN27NJ00
L2
22 nH
Coil Wire-wound, 0603, 5%
MuRata
LQW18AN22NJ00
SMA
N/A
SMA connector
Johnson Components
142-0701-801
PCB
N/A
3-layer
multiple
991275
856882
358.4 MHz SAW Filter
Data Sheet: Rev - 7/26/11
- 5 of 8 -
Disclaimer: Subject to change without notice e
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network ®
Impedance option #3 100 Bal Input, 100 Bal Output
Schematic
100
Balanced
Input
1,2,3,5
7,8,9,11
100
12 4
100
13nH
10 6
6.0pF
12pF 4.0pF
16nH
16nH
100
Balanced
Output
Note: Actual matching values may vary due to PCB layout and parasitic
PC Board
Mounting Configuration
856882
TriQuint
JJJYHH
L2
960686
C1 L1 L3
C2 C3
5.71
.99
7.21
1.34 1.34
.99 .28
.28
Notes:
Top, middle & bottom layers: 1 oz copper
Substrates: FR4 dielectric, .031” thick
Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick
Hole plating: Copper min .0008µm thick
Notes:
5. All dimensions are in millimeters.
6. This footprint represents a recommendation only.
Bill of Material
Reference Desg.
Value
Description
Manufacturer
Part Number
C1
12 pF
Chip Ceramic, 0603, 5%
Panasonic
ECU-V1H120JCV
C2
4.0 pF
Chip Ceramic, 0603, 5%
Panasonic
ECU-V1H040CCV
C3
6.0 pF
Chip Ceramic, 0603, 5%
Panasonic
ECU-V1H060CCV
L1
16 nH
Coil Wire-wound, 0603, 5%
MuRata
LQW18AN16NJ00
L2
16 nH
Coil Wire-wound, 0603, 5%
MuRata
LQW18AN16NJ00
L3
13 nH
Coil Wire-wound, 0603, 5%
MuRata
LQW18AN13NJ00
SMA
N/A
SMA connector
Johnson Components
142-0701-801
PCB
N/A
3-layer
multiple
960686
856882
358.4 MHz SAW Filter
Data Sheet: Rev - 7/26/11
- 6 of 8 -
Disclaimer: Subject to change without notice e
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network ®
Typical Performance (at room temperature)
856882
358.4 MHz SAW Filter
Data Sheet: Rev - 7/26/11
- 7 of 8 -
Disclaimer: Subject to change without notice e
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network ®
Mechanical Information
Package Information, Dimensions and Marking
Package Style: SMP-28B
Dimensions: 7.01 x 5.51 x 1.63 mm
Body: Al2O3 ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni
plating
All dimensions shown are nominal in millimeters
All tolerances are ±0.15mm except overall length and width
±0.10mm
The date code consists of: day of the current year (Julian,
3 digits), Y = last digit of the year (1 digit), and HH = hour
(2 digits)
Tape and Reel Information
Standard T/R size = 3000 units/reel. All dimensions are in millimeters
Section A-A
0.3
2.2
7.3
5.8
Ø1.5
8.0
4.0
2.0 A
A
Ø1.5
16.0
7.5
1.75
Ø13.0
Ø20.2
Ø102
Ø330
16.8
2.7 ID dot
Direction of travel
2.0
Absolute Maximum Ratings
Parameter
Condition
Value
Unit
Operating Temperature range
-33 to +85
oC
Storage Temperature range
-40 to +85
oC
Input Power
24 Hrs at 50 oC, in band
+19
dBm
24 Hrs at 50 oC, out of band
+25
dBm
DC Voltage
Between input/output and ground
5
V
DC Voltage
Between terminals 10/12 or 4/6
5
V
Moisture Sensitivity level
MSL3 or better
-
Operation of this device outside the parameter ranges given above may cause permanent damage.
1.63 NOM.
1.78 MAX.
5.51
0.76
1.14
1.27
1.70
0.79
1.27
7.01
Date code
856882
TriQuint
ID dot
JJJYHH
856882
358.4 MHz SAW Filter
Data Sheet: Rev - 7/26/11
- 8 of 8 -
Disclaimer: Subject to change without notice e
© 2011 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network ®
Product Compliance Information
ESD Information
ESD Rating: 1B
Value: Passes 550 V min.
Test: Human Body Model (HBM)
Standard: JEDEC Standard JESD22-A114
ESD Rating: B
Value: Passes 350 V min.
Test: Machine Model (MM)
Standard: JEDEC Standard JESD22-A115
Solderability
Compatible with the latest version of J-STD-020, lead
free solder, 260°C
Refer to Soldering Profile for recommended guidelines.
This part is compliant with EU 2002/95/EC RoHS
directive (Restrictions on the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment).
This product also has the following attributes:
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
PFOS Free
SVHC Free
MSL Rating
Devices are Hermetic, therefore MSL is not applicable
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and information about
TriQuint:
Web: www.triquint.com Tel: +1.407.886.8860
Email: info-sales@tqs.com Fax: +1.407.886.7061
For technical questions and application information:
Email: flapplication.engineering@tqs.com
Important Notice
The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain
herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint
assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained
herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with
the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest
relevant information before placing orders for TriQuint products. The information contained herein or any use of such
information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property
rights, whether with regard to such information itself or anything described by such information.
TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining
applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.
Caution! ESD-Sensitive Device
