856977 787.5 MHz SAW Filter Applications General purpose wireless Wireless infrastructure 3G, 4G, Multistandard Repeaters Product Features Functional Block Diagram Top view Usable bandwidth 21 MHz High attenuation Low Loss Single-ended operation Matching required for operation at 50 Small Size: 3.00 x 3.00 x 1.22 mm Ceramic Surface Mount Package (SMP) Hermetically sealed RoHS compliant, Pb-free General Description Gnd 1 6 Gnd Input 2 5 Output Gnd 3 4 Gnd Pin Configuration Uplink filter combining bands 13 and 14 for general purpose wireless applications. This filter was specifically designed in a 3x3mm hermetic package for base station applications and is part of our wide portfolio of RF filters in the same package. Low insertion loss, coupled with high attenuation and good power handling, makes this filter a natural choice for our customers uplink RF filtering needs. Pin # SE Description 2 5 1,3,4,6 Input Output Case Ground Ordering Information Part No. Description 856977 856977-EVB packaged part evaluation board Standard T/R size = 5000 units/reel. Data Sheet: Rev A 5/18/11 (c) 2011 TriQuint Semiconductor, Inc. - 1 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856977 787.5 MHz SAW Filter Specifications Electrical Specifications (1) Specified Temperature Range: (2) -30 to +85 C Parameter (3) Center Frequency Maximum Insertion Loss Amplitude Variation (5) Amplitude Ripple (any 5 MHz in passband) (6) Amplitude Ripple (6) Phase Ripple Group Delay Ripple Absolute Group Delay Attenuation(7) Input/Output VSWR Source/Load Impedance (8) Conditions Min Typical (4) Max Units 777 - 798 MHz 777 - 798 MHz 777 - 798 MHz - 787.5 2.05 0.5 0.5 2.75 1.4 1.0 MHz dB dB dB p-p 50 40 30 15 5 10 40 30 42 30 20 - 0.5 42 39 48 74 66 60 23 23 21 53 55 52 58 42 1.4 50 1.2 55 60 55 2.0 - dB p-p deg p-p ns p-p ns dB dB dB dB dB dB dB dB dB dB dB - 777 - 798 MHz 777 - 798 MHz 777 - 798 MHz 777 - 798 MHz 70 - 120 MHz 430 - 470 MHz 591 - 614 MHz 746 - 765 MHz 765 - 768 MHz 818 - 824 MHz 843 - 857 MHz 1005 - 1026 MHz 1688 - 1711 MHz 2010 - 2052 MHz 2922 - 2964 MHz 777 - 798 MHz Single-ended Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. Typical values are based on average measurements at room temperature 5. Describes the total variation over the defined frequency range 6. This is defined as the worst difference between a peak and adjacent valley within defined frequency points 7. Relative to passband loss at center frequency 8. This is the optimum impedance in order to achieve the performance shown Absolute Maximum Ratings Parameter Rating Operating Temperature (9) Storage Temperature Input Power (10Khrs @ 55 oC under CW signal) (10) -40 to +85 oC -40 to +85 oC +20 dBm 9. Device may operate over this range with degraded Electrical Specifications 10. Device can also meet +22dBm power for an applied CW modulated CW signal at 55 deg C for a minimum of 125 hours in the 777.0798.0 MHz frequency band" Operation of this device outside the parameter ranges given above may cause permanent damage. Data Sheet: Rev A 5/18/11 (c) 2011 TriQuint Semiconductor, Inc. - 2 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856977 787.5 MHz SAW Filter Reference Design Schematic 8.2nH 8.7nH 2 50 Single-ended Input 50 PC Board 5 1,3,4,6, 50 Single-ended Output 50 Mounting Configuration 3.20 SQ L1 .96 1.70 L2 HB JJJYM 1.27 960700 .81 .38 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031" thick Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick Hole plating: Copper min .0008m thick Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number L1 L2 SMA PCB 8.2nH 8.7nH N/A N/A Coil Wire-wound, 0402, 5% Coil Wire-wound, 0402, 5% SMA connector 3-layer Murata Murata Radiall USA Inc. multiple LQW15AN8N2J00 LQW15AN8N7J00 9602-1111-018 960700 Data Sheet: Rev A 5/18/11 (c) 2011 TriQuint Semiconductor, Inc. - 3 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856977 787.5 MHz SAW Filter Typical Performance (at room temperature) Data Sheet: Rev A 5/18/11 (c) 2011 TriQuint Semiconductor, Inc. - 4 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856977 787.5 MHz SAW Filter Mechanical Information Package Information, Dimensions and Marking Marking code TriQuint logo HB ID dot Package Style: SMP-12A Dimensions: 3.00 x 3.00 x 1.22 mm Date code Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2-6m Ni plating JJJYM 1.22 NOM. 1.32 MAX. All dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm 0.69 The date code consists of day of the current year (Julian, 3 digits), Y = last digit of the year, and M = manufacturing site code 3.00 0.75 1.50 3.00 0.75 Tape and Reel Information Standard T/R size = 5000 units/reel. All dimensions are in millimeters 2.7 12.8 ID dot O330 TriQuint logo Section A-A 4.0 0.21 2.0 O1.5 A 1.75 5.5 O102 O20.2 O13.0 2.0 Direction of travel 12.0 3.25 1.4 3.25 4.0 A O1.5 Data Sheet: Rev A 5/18/11 (c) 2011 TriQuint Semiconductor, Inc. - 5 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856977 787.5 MHz SAW Filter Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, lead free solder, 260C Caution! ESD-Sensitive Device Refer to Soldering Profile for recommended guidelines. ESD Rating: 0 Value: Test: Standard: This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). Passes 200 V min. Human Body Model (HBM) JEDEC Standard JESD22-A114 This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free ESD Rating: A Value: Passes 150 V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 MSL Rating Devices are Hermetic, therefore MSL is not applicable Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev A 5/18/11 (c) 2011 TriQuint Semiconductor, Inc. - 6 of 6 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R)