Thin Film Chip Resistors ( RB series Standard ) Document No TRB-060S001B Issued date 2007/12/27 page 1/9 1. Scope : This specification applies for the RB series of thin film chip resistors made by TA-I. 2. Construction: Over Coat Sn Plating Ni Plating Resistive Element Inner electrode Ceramic Substrate 3. Type Designation: RB 06 Product Code Size RB : Thin Film B Tolerance T P 1001 Packaging TCR Nominal Power Rating 06-0603(1608) 1/10W B- 0.10% Resistance T- Paper J- 5 ppm C- 0.25% Tape k- 10 ppm D- 0.50% B- Bulk M- 15 ppm F- 1.00% Cassette e.g., 1001=1k P- 25 ppm S- 50 ppm TA-I TECHNOLOGY CO., LTD Document No TRB-060S001B Issued date 2007/12/27 page 2/9 Thin Film Chip Resistors ( RB series Standard ) 4. Dimensions: 102 UNIT: mm Type RB06 L W 1.60 0.10 C 0.80 0.10 0.30 0.20 d 0.30 t 0.20 0.10 0.45 0.10 5. Ratings & Characteristics Type Power Rating at 70 Rated Voltage Max. Max. Working Over- Load Voltage Voltage T.C.R (PPM/) Resistance Range Resistance tolerance(%) RB06 1/10 W Refer 5.2 75V 150V 50 1~9.1 0.5~1 RB06 1/10 W Refer 5.2 75V 150 10 25 50 10~390K 0.1 ~ 1.0 Operating Temp(): -55 ~ +125 Note : Except for the above standardized products, we also provide the customized products. TA-I TECHNOLOGY CO., LTD Document No TRB-060S001B Issued date 2007/12/27 page 3/9 Thin Film Chip Resistors ( RB series Standard ) 5.1 Derating Curve : For resistors operated at ambient temperature over 70 , power rating shall be derated according to figure 1. 100 P max. Power ratio ( % ) 50 0 -55 50 70 100 125 Ambient Temp. ( C ) Figure 1 5.2 Rated Voltage: The rated voltage is calculated by the following formula: E= P * R E=Rated Voltage(V) P=Rated Power(W) R=Resistance Value() TA-I TECHNOLOGY CO., LTD Thin Film Chip Resistors ( RB series Standard ) Document No TRB-060S001B Issued date 2007/12/27 page 4/9 6. Reliability Tests:(As specified in JIS C 5202) Reference standard Test Items Temperature Coefficient of JIS-C5202-5.2 Resistance Condition of Test +25 ~ +125 Test Limits Refer 5.0 -55(30 min. ) / +125(30 min. ), 5 (0.5%+0.05) cycles Rapid Change of Temp. JIS-C5202-7.4 Short Time Overload JIS-C5202-5.5 2.5 X rated voltage for 5sec (0.5% + 0.05) Resistance to Dry Heat JIS-C5202-7.2 1255 for 964Hrs (0.5% +0.05) Load Life JIS-C5202-7.10 Resistance to Solder Heat JIS-C5202-6.10 270 5 solder , 10 1 sec dwell . (0.5% +0.05) Bending JIS-C5202--6.1 3mm deflection (0.5% +0.05) 1000 hours at rated power , 70 , (0.5% +0.05) 1.5hours"ON ", 0.5hour "OFF" Applying voltage : 0201 : 50V , 0402 & 0603 : 300V Dielectric Withstanding JIS-C5202-5.7 The other 500V Voltage (Voltage Proof) for a minute . Load Life with Humidity JIS-C5202-7.5 402, 90~95% RH for 1000 hours Insulation Resistance JIS-C5202-5.6 Solderability JIS-C5202-6.11 Applying voltage 100V for 1 minute. Remark : 0201 50V 245 5 solder, 2 0.5 sec dwell. Solder : Sn96.5 / Ag3.0 / Cu0.5 No abnormalities such as flashover, burning dielectric breakdown shall appear. (0.5% +0.05) 1G At least 95% of surface area of electrode shall be covered with new solder. Note* :RCWV : Rated continuous working voltage . 7. Marking 7.1 0.1% ~ 1% Resistance value is expressed by 4 digits, the first three digits represent the significant figures of nominal resistance value in, and the fourth digit represents exponent for base of 10. e.g., 1001 =100 x101 = 1000=1K 7.2 1%(RB06/E96) When the marking space is too small in such small-sized resistors as RM06, the marking can not made by 4 digits and may be made by two digits combined with one English capital. TA-I TECHNOLOGY CO., LTD Thin Film Chip Resistors ( RB series Standard ) Document No TRB-060S001B Issued date 2007/12/27 page 5/9 Symbol for E96 series nominal resistance value Symbol 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 E96 100 102 105 107 110 113 115 118 121 124 127 130 133 137 140 143 147 150 154 158 162 165 169 174 Symbol 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 E96 178 182 187 191 196 200 205 210 215 221 226 232 237 243 249 255 261 267 274 280 287 294 301 309 Symbol 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 E96 316 324 332 340 348 357 365 374 383 392 402 412 422 432 442 453 464 475 487 499 511 523 536 549 Symbol 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 E96 562 576 590 604 619 634 649 665 681 698 715 732 750 768 787 806 825 845 866 887 909 931 953 976 Symbol for multipliers Symbol A B C D E F G H X Y Z multipliers 100 101 102 103 104 105 106 107 10-1 10-2 10-3 Ex: 02c=102 x102=10.2k 7.3 No Marking for RB04 8. Taping & Reel 8.1 Taping Dimensions 8.1.1 4 mm pitch paper TA-I TECHNOLOGY CO., LTD Document No TRB-060S001B Issued date 2007/12/27 page 6/9 Thin Film Chip Resistors ( RB series Standard ) Packing Type Paper Tape A B W F E P1 P2 P0 1.10.1 1.90.1 8.00.2 3.50.05 1.750.1 4.00.1 2.00.1 4.00.1 D0 RB06 T +0.1 0.640.1 1.5 -0 UNIT: mm Paper Tape Type Size 4 mm pitch 2 mm pitch 180mm/R 180mm/R 06 RB 5000 8.2 Reel Specifications Type A B C 60 min 13.0 1.0 W T +0 RB06 180 9.0 1.0 11.4 2.0 -3 TA-I TECHNOLOGY CO., LTD Thin Film Chip Resistors ( RB series Standard ) Document No TRB-060S001B Issued date 2007/12/27 page 7/9 UNIT: mm 8.3 Peel - off force : Peel - off force of paper and blister tape is in accordance with "JIS " that is , 0.1 to 0.7 N at a peel-off speed of 300 mm / minute. pull 300 mm/min top cover tape 10 ~ 15 standard: 0.1 ~ 0.7 N carrier tape 9. Bulk Case Specifications: UNIT:mm TA-I TECHNOLOGY CO., LTD Thin Film Chip Resistors ( RB series Standard ) Document No TRB-060S001B Issued date 2007/12/27 page 8/9 10. Label 10.1 Normal Products : Date Code Resistance Tolerance QTY: 5000 PCS LEAD-FREE 1001 Lot No: 0086166- 0008 Type BTP RB06BTP Manufacture Label 11. Recommended land patterns Land pattern Type RB Size 06 (0603 ) a 0.7 ~ 0.9 Dimension ( mm ) b 2.0 ~ 2.2 c 0.8 ~1.0 12. ECN Engineering Change Notice: The customer will be informed with ECN if there is significant modification on the characteristics and materials described in Approval Sheet. 13. Storage Conditions: Temperature: 5~35,Humidity:40%~75% TA-I TECHNOLOGY CO., LTD Thin Film Chip Resistors ( RB series Standard ) Document No TRB-060S001B Issued date 2007/12/27 page 9/9 14. Shelf Life: 2 years from manufacturing date. 15. Recommend IR - Reflow profile : (solder : Sn96.5 / Ag3 / Cu0.5) Peak : 250 +5 -0 , 5 sec Pre - heat Zone : 150 to 180 , 9030 sec Soldering Zone : 230 or higher , 3010 sec 16. Manufacturing Country & City: TA-I TECHNOLOGY CO., LTD. ( Taiwan- Taoyuan ) Tel: 886-3-3246169 Fax : 886-3-3247410 Associated companies : (1) FORTUNE TASK RESISTOR FACTORY ( China - Kwangtung ) Tel : 86-769-83394790 Fax : 86-769-83394794 (2) TA-I TECHNOLOGY ( SU ZHOU ) CO., LTD. ( China - Jiang-Su ) Tel :86- 512-63457879 Fax : 86-512-63457869 (3) TAI OHM ELECTRONICS ( M ) SDN. BHD. ( Malaysia - Pulaupinang ) Tel :604- 3900480 Fax : 604-3901481 (4) P.T.TAI ELECTRONICS Indonesia ( Indonesia - Jakarta ) Tel :002-62-21-89830123 Fax : 002-62-21-89830703 TA-I TECHNOLOGY CO., LTD