Document No TRB-060S001B
Issued date 2007/12/27
Thin Film Chip Resistors
( RB series Standard )
page 1/9
TA-I TECHNOLOGY CO., LTD
1. Scope :
This specification applies for the RB series of thin film chip resistors made by TA-I.
2. Construction:
3. Type Designation:
RB 06 B T P 1001
Product Code Size Tolerance Packaging TCR Nominal
RB : Thin Film Power Rating Resistance
Over Coat
Ceramic Substrate
Ni Plating
Inner electrode
Sn Plating
Resistive Element
06-0603(1608) 1/10W
B- ±0.10%
C- ±0.25%
D- ±0.50%
F- ±1.00%
T- Paper
Tape
B- Bulk
Cassette
J- ±5 ppm
k- ±10 ppm
M- ±15 ppm
P- ±25 ppm
S- ±50
pp
m
e.g.,
1001=1kΩ
Document No TRB-060S001B
Issued date 2007/12/27
Thin Film Chip Resistors
( RB series Standard )
page 2/9
TA-I TECHNOLOGY CO., LTD
4. Dimensions:
UNIT: mm
Type L W C d t
RB06 1.60 ±0.10 0.80 ±0.10 0.30 ±0.20 0.30 0.20
0.10 0.45 ±0.10
5. Ratings & Characteristics
Type
Power
Rating
at 70
Rated
Voltage
Max.
Working
Voltage
Max.
Over- Load
Voltage
T.C.R
(PPM/)Resistance Range Resistance
tolerance(%)
RB06 1/10 W Refer 5.2 75V 150V ± 50 1~9.1Ω ±0.5~1
RB06 1/10 W Refer 5.2 75V 150
± 10
±25
± 50
10Ω~390KΩ± 0.1 ~ ±1.0
Operating Temp(): -55 ~ +125
Note : Except for the above standardized products, we also provide the
customized products.
102
Document No TRB-060S001B
Issued date 2007/12/27
Thin Film Chip Resistors
( RB series Standard )
page 3/9
TA-I TECHNOLOGY CO., LTD
5.1 Derating Curve :
For resistors operated at ambient temperature over 70 , power rating shall be derated
according to figure 1.
100
P max.
Power ratio ( % )
50
0
-55 50
70 100 125
Ambient
Temp. (
°
C )
Figure 1
5.2 Rated Voltage:
The rated voltage is calculated by the following formula:
E= P * R E=Rated Voltage(V)
P=Rated Power(W)
R=Resistance Value(Ω)
Document No TRB-060S001B
Issued date 2007/12/27
Thin Film Chip Resistors
( RB series Standard )
page 4/9
TA-I TECHNOLOGY CO., LTD
6. Reliability Tests:(As specified in JIS C 5202)
Test Items Reference
standard Condition of Test Test Limits
Temperature Coefficient of
Resistance JIS-C5202-5.2 +25 ~ +125 Refer 5.0
Rapid Change of Temp. JIS-C5202-7.4 -55(30 min. ) / +125(30 min. ), 5
cycles ±(0.5%+0.05Ω)
Short Time Overload JIS-C5202-5.5 2.5 X rated voltage for 5sec ±(0.5% + 0.05Ω)
Resistance to Dry Heat JIS-C5202-7.2 125±5 for 96±4Hrs ±(0.5% +0.05Ω)
Load Life JIS-C5202-7.10 1000 hours at rated power , 70,
1.5hours“ON “, 0.5hour “OFF” ±(0.5% +0.05Ω)
Resistance to Solder Heat JIS-C5202-6.10 270 ±5 solder , 10 ±1 sec dwell . ±(0.5% +0.05Ω)
Bending JIS-C5202—6.1 3mm deflection ±(0.5% +0.05Ω)
Dielectric Withstanding
Voltage (Voltage Proof) JIS-C5202-5.7
Applying voltage :
0201 : 50V , 0402 & 0603 : 300V
The other 500V
for a minute .
No abnormalities such as
flashover, burning
dielectric breakdown shall
appear.
Load Life with Humidity JIS-C5202-7.5 40±2, 90~95% RH for 1000 hours ±(0.5% +0.05Ω)
Insulation Resistance JIS-C5202-5.6 Applying voltage 100V for 1 minute.
Remark : 0201 50V 1GΩ
Solderability JIS-C5202-6.11 245 ±5 solder, 2 ±0.5 sec dwell.
Solder : Sn96.5 / Ag3.0 / Cu0.5
A
t least 95% of surface
area of electrode shall be
covered with new solder.
Note* :RCWV : Rated continuous working voltage .
7. Marking
7.1 ±0.1% ~ 1%
Resistance value is expressed by 4 digits, the first three digits represent the
significant figures of nominal resistance value inΩ, and the fourth digit
represents exponent for base of 10.
e.g., 1001 =100 ×101 = 1000Ω=1KΩ
7.2 ±1%(RB06/E96)
When the marking space is too small in such small-sized resistors as RM06, the
marking can not made by 4 digits and may be made by two digits combined
with one English capital.
Document No TRB-060S001B
Issued date 2007/12/27
Thin Film Chip Resistors
( RB series Standard )
page 5/9
TA-I TECHNOLOGY CO., LTD
Symbol for E96 series nominal resistance value
Symbol E96 Symbol E96 Symbol E96 Symbol E96
01 100 25 178 49 316 73 562
02 102 26 182 50 324 74 576
03 105 27 187 51 332 75 590
04 107 28 191 52 340 76 604
05 110 29 196 53 348 77 619
06 113 30 200 54 357 78 634
07 115 31 205 55 365 79 649
08 118 32 210 56 374 80 665
09 121 33 215 57 383 81 681
10 124 34 221 58 392 82 698
11 127 35 226 59 402 83 715
12 130 36 232 60 412 84 732
13 133 37 237 61 422 85 750
14 137 38 243 62 432 86 768
15 140 39 249 63 442 87 787
16 143 40 255 64 453 88 806
17 147 41 261 65 464 89 825
18 150 42 267 66 475 90 845
19 154 43 274 67 487 91 866
20 158 44 280 68 499 92 887
21 162 45 287 69 511 93 909
22 165 46 294 70 523 94 931
23 169 47 301 71 536 95 953
24 174 48 309 72 549 96 976
Symbol for multipliers
Symbol A B C D E F G H X Y Z
multipliers 100 101 102 103 104 105 106 107 10-1 10-2 10-3
Ex: 02c=102 ×102=10.2kΩ
7.3 No Marking for RB04
8. Taping & Reel
8.1 Taping Dimensions
8.1.1 4 mm pitch paper
Document No TRB-060S001B
Issued date 2007/12/27
Thin Film Chip Resistors
( RB series Standard )
page 6/9
TA-I TECHNOLOGY CO., LTD
Packing Type A B W F E P1 P
2 P
0 D
0 T
Paper Tape
RB06
1.1±0.1 1.9±0.1 8.0±0.2 3.5±0.05 1.75±0.1 4.0±0.1 2.0±0.1 4.0±0.1
+0.1
ψ1.5
-0
0.64±0.1
UNIT: mm
Paper Tape
4 mm pitch 2 mm pitch
Type Size
180mm/R 180mm/R
RB 06 5000
8.2 Reel Specifications
Type ψA ψB ψC W T
RB06
+0
180
-3
60 min 13.0 ±1.0
9.0 ±1.0
11.4 ±2.0
Document No TRB-060S001B
Issued date 2007/12/27
Thin Film Chip Resistors
( RB series Standard )
page 7/9
TA-I TECHNOLOGY CO., LTD
UNIT: mm
8.3 Peel – off force :
Peel – off force of paper and blister tape is in accordance with “JIS ”
that is , 0.1 to 0.7 N at a peel-off speed of 300 mm / minute.
pull
top cover tape 300 mm/min
10 ~ 15° standard: 0.1 ~ 0.7 N
carrier tape
9. Bulk Case Specifications:
UNIT:mm
Document No TRB-060S001B
Issued date 2007/12/27
Thin Film Chip Resistors
( RB series Standard )
page 8/9
TA-I TECHNOLOGY CO., LTD
10. Label
10.1 Normal Products :
Date Code Resistance Tolerance Type
Lot No:
Manufacture Label
11. Recommended land patterns
Dimension ( mm )
Land pattern
Type Size a b c
RB 06 (0603 ) 0.7 ~ 0.9 2.0 ~ 2.2 0.8 ~1.0
12. ECN
Engineering Change Notice: The customer will be informed with ECN if there is significant
modification on the characteristics and materials described in Approval Sheet.
13. Storage Conditions:
Temperature: 5~35,Humidity:40%~75%
QTY: 5000 PCS LEAD-FREE
1001 BTP
0086166- 0008 RB06BTP
Document No TRB-060S001B
Issued date 2007/12/27
Thin Film Chip Resistors
( RB series Standard )
page 9/9
TA-I TECHNOLOGY CO., LTD
14. Shelf Life:
2 years from manufacturing date.
15. Recommend IR – Reflow profile : (solder : Sn96.5 / Ag3 / Cu0.5)
Peak : 250 0
5
+ , 5 sec
Pre – heat Zone : 150 to 180 , 90±30 sec
Soldering Zone : 230 or higher , 30±10 sec
16. Manufacturing Country & City:
TA-I TECHNOLOGY CO., LTD. ( Taiwan– Taoyuan )
Tel: 886-3-3246169 Fax : 886-3-3247410
Associated companies :
(1) FORTUNE TASK RESISTOR FACTORY ( China - Kwangtung )
Tel : 86-769-83394790 Fax : 86-769-83394794
(2) TA-I TECHNOLOGY ( SU ZHOU ) CO., LTD. ( China – Jiang-Su )
Tel :86- 512-63457879 Fax : 86-512-63457869
(3) TAI OHM ELECTRONICS ( M ) SDN. BHD. ( Malaysia – Pulaupinang )
Tel :604- 3900480 Fax : 604-3901481
(4) P.T.TAI ELECTRONICS Indonesia ( Indonesia – Jakarta )
Tel :002-62-21-89830123 Fax : 002-62-21-89830703