FEATURES
• For surface mounted applications in order to
optimize board space
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• Repetition rate (duty cycle):0.01%
• Fast response time: typically less than
1.0 ps from 0 volts to BV for unidirectional types
• Typical IR less than 1µA above 10V
• High temperature soldering:
250°C/10 seconds at terminals
• Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O
MECHANICAL DATA
Case: JEDEC DO214AB. Molded plastic over glass
passivated junction
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode) Dimensions in inches and (millimeters)
except Bidirectional
Standard Packaging: 16mm tape (EIA STD RS-481)
Weight: 0.007 ounces, 0.21 grams)
Ratings at 25°C ambient temperature unless otherwise specified.
RATING SYMBOL VALUE UNITS
Peak Pulse Power Dissipation on 10/1000 µs
waveform (NOTE 1, 2, Fig.1) IPPM SEE TABLE 1 Amps
Superimposed on Rated Load, (JEDEC Method)(Note2, 3)
Operatings and Storage Temperature Range TJ, TSTG -55 +150 °C
NOTES:
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
Certified RoHS Compliant
UL File # E223026
IFSM 300 Amps
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
PPPM Minimum 3000 Watts
Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3)
MAXIMUM RATINGS AND CHARACTERISTICS
Electrical characteristics apply in both directions.
For Bidirectional use C or CA Suffix for types SMDJ5.0 thru types SMDJ170 (e.g. SMDJ5.0C, SMDJ170CA)
DEVICES FOR BIPOLAR APPLICATIONS
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE-5.0 TO 170 Volts
3000 Watt Peak Pulse Power
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com
SMDJ SERIES
RATING AND CHARACTERISTIC CURVES SMDJ SERIES
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com
t - Time(ms)
3.0 4.0
150
0
1.0 2.0
tr = 10μsec.
Peak Value
IPP
M
TJ = 25°C
Pulse Width(td)is defined
as the point where the
peak current decays to
50% of IPPM
10/1000μsec.Waveform
as defined by R.E.A.
td
Fig.3 - Pulse Waveform
4.0
50
Half Value- IPPM
2
100
IPPM - Peak Pulse Current,% I
RSM
3.0
0
0.1
1
10
100
10ms
0.1μs 1.0μs10μs 100μs 1.0ms
td - Pulse Width (sec.)
Fi
g
. 1 - Peak Pulse Power Ratin
g
Curve
PPPM-Peak Pulse Power (kW)
Non-repetitive pulse
waveform shown in
Fig.3 TA = 25°C
10
100
1000
10000
1 10 100 1000
5
10
100
1000
10000
CJ - Capacitance (pF
)
Fig. 4 - Typical Junction Capacitance
VWM - Reverse Stand-Off Voltage (V)
Unidirectional
Bidirectional
f = 1MHz
Vsig = 50mVp-p
T
J 25°C
VR = 0
500
VR = Rated
Stand
-
off
10
PM(AV),Steady State Powe
r
Dissipation (W)
0 25 50 75 100 125 150 175 200
0
1.0
2.0
3.0
4.0
Fig. 5 - Steady State Power
Derating Curve
TL - Lead Temperature (°C)
5.0
6.0
7.0
8.0
60Hz
Resistive or
Inductive Load
100
150
200
250
300
1 10 100
Number of C
y
cles at 60 H
z
Fig.6 - Maximum Non-Repetitive Forward
Surge Current Uni-Directional Only
8.3ms Single Half Sine-Wave
(JEDEC Method)TJ=TJ max.
FSM-
ea
orwar
urge
Current
(
A
)
0
12.5
25
37.5
50
62.5
75
87.5
100
0 25 50 75 100 125 150 175 200
Fig.2 - Pulse Derating Curve
Peak Pulse Power (P
PP)
or Current (IPP)
Derating in Percentage,
%
TA - Ambient Temperature (°C)
3000 Watt Surface Mount TVS
UNI BI
SMDJ5.0A SMDJ5.0CA RDE DDE 5.00 6.40 7.00 10 9.2 326.1 800
SMDJ6.0A SMDJ6.0CA RDG DDG 6.00 6.67 7.37 10 10.3 291.3 800
SMDJ6.5A SMDJ6.5CA RDK DDK 6.50 7.22 7.98 10 11.2 267.9 500
SMDJ7.0A SMDJ7.0CA PDM DDM 7.00 7.78 8.60 10 12.0 250.0 200
SMDJ7.5A SMDJ7.5CA PDP DDP 7.50 8.33 9.21 1 12.9 232.6 100
SMDJ8.0A SMDJ8.0CA PDR DDR 8.00 8.89 9.83 1 13.6 220.6 50
SMDJ8.5A SMDJ8.5CA PDT DDT 8.50 9.44 10.40 1 14.4 208.3 20
SMDJ9.0A SMDJ9.0CA PDV DDV 9.00 10.00 11.10 1 15.4 194.8 10
SMDJ10A SMDJ10CA PDX DDX 10.00 11.10 12.30 1 17.0 176.5 5
SMDJ11A SMDJ11CA PDZ DDZ 11.00 12.20 13.50 1 18.2 164.8 5
SMDJ12A SMDJ12CA PEE DEE 12.00 13.30 14.70 1 19.9 150.8 5
SMDJ13A SMDJ13CA PEG DEG 13.00 14.40 15.90 1 21.5 139.5 5
SMDJ14A SMDJ14CA PEK DEK 14.00 15.60 17.20 1 23.2 129.3 5
SMDJ15A SMDJ15CA PEM DEM 15.00 16.70 18.50 1 24.4 123.0 5
SMDJ16A SMDJ16CA PEP DEP 16.00 17.80 19.70 1 26.0 115.4 5
SMDJ17A SMDJ17CA PER DER 17.00 18.90 20.90 1 27.6 108.7 5
SMDJ18A SMDJ18CA PET DET 18.00 20.00 22.10 1 29.2 102.7 5
SMDJ20A SMDJ20CA PEV DEV 20.00 22.20 24.50 1 32.4 92.6 5
SMDJ22A SMDJ22CA PEX DEX 22.00 24.40 26.90 1 35.5 84.5 5
SMDJ24A SMDJ24CA PEZ DEZ 24.00 26.70 29.50 1 38.9 77.1 5
SMDJ26A SMDJ26CA PFE DFE 26.00 28.90 31.90 1 42.1 71.3 5
SMDJ28A SMDJ28CA PFG DFG 28.00 31.10 34.40 1 45.4 66.1 5
SMDJ30A SMDJ30CA PFK DFK 30.00 33.30 36.80 1 48.4 62.0 5
SMDJ33A SMDJ33CA PFM DFM 33.00 36.70 40.60 1 53.3 56.3 5
SMDJ36A SMDJ36CA PFP DFP 36.00 40.00 44.20 1 58.1 51.6 5
SMDJ40A SMDJ40CA PFR DFR 40.00 44.40 49.10 1 64.5 46.5 5
SMDJ43A SMDJ43CA PFT DFT 43.00 47.80 52.80 1 69.4 43.2 5
SMDJ45A SMDJ45CA PFV DFV 45.00 50.00 55.30 1 72.7 41.3 5
SMDJ48A SMDJ48CA PFX DFX 48.00 53.30 58.90 1 77.4 38.8 5
SMDJ51A SMDJ51CA PFZ DFZ 51.00 56.70 62.70 1 82.4 36.4 5
SMDJ54A SMDJ54CA PGE DGE 54.00 60.00 66.30 1 87.1 34.4 5
SMDJ58A SMDJ58CA PGG DGG 58.00 64.40 71.20 1 93.6 32.1 5
SMDJ60A SMDJ60CA PGK DGK 60.00 66.70 73.70 1 96.8 31.0 5
SMDJ64A SMDJ64CA PGM DGM 64.00 71.10 78.60 1 103.0 29.1 5
SMDJ70A SMDJ70CA PGP DGP 70.00 77.80 86.00 1 113.0 26.5 5
SMDJ75A SMDJ75CA PGR DGR 75.00 83.30 92.10 1 121.0 24.8 5
SMDJ78A SMDJ78CA PGT DGT 78.00 86.70 95.80 1 126.0 23.8 5
SMDJ85A SMDJ85CA PGV DGV 85.00 94.40 104.00 1 137.0 21.9 5
SMDJ90A SMDJ90CA PGX DGX 90.00 100.00 111.00 1 146.0 20.5 5
SMDJ100A SMDJ100CA PGZ DGZ 100.00 111.00 123.00 1 162.0 18.5 5
SMDJ110A SMDJ110CA PHE DHE 110.00 122.00 135.00 1 177.0 16.9 5
SMDJ120A SMDJ120CA PHG DHG 120.00 133.00 147.00 1 193.0 15.5 5
SMDJ130A SMDJ130CA PHK DHK 130.00 144.00 159.00 1 209.0 14.4 5
SMDJ150A SMDJ150CA PHM DHM 150.00 167.00 185.00 1 243.0 12.3 5
SMDJ160A SMDJ160CA PHP DHP 160.00 178.00 197.00 1 259.0 11.6 5
SMDJ170A SMDJ170CA PHR DHR 170.00 189.00 209.00 1 275.0 10.9 5
For bidirectional type having Vrwm of 10 volts and less, the IR limit is double.
For parts without A , the VBR is ± 10
%
Certified RoHS Compliant
UL File # E223026
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com
UNI-POLAR BI-POLAR
DEVICE
MARKING
CODE
REVERSE
STANDOFF
VOLTAGE
VRWM (V)
PEAK
PULSE
CURRENT
IPP (A)
REVERSE
LEAKAGE
@ VRWM
IR (µA)
BREAKDOWN
VOLTAGE
VBR (V)
MIN. @ IT
BREAKDOWN
VOLTAGE
VBR (V)
MAX. @ IT
TEST
CURRENT
(IT)
mA
MAXIMUM
CLAMPING
VOLTAGE
@IPP VC (V)