SLFC/T-ADSS-MH - 3M Interconnect Solutions

1.0 Kit Contents

1.1 The 3M™ SLiC™ Fiber ADSS Cable Mounting

Hardware Kit SLFC/T-ADSS-MH contains:

a) Torx screw (2)

b) Flange nut (2)

c) Washer (2)

Note: Visually inspect all components. If any component

is missing or appears damaged, do not install. Call 3M

customer service at 1-800-426-8688 for a replacement

product.

1.2 Additional materials required:

a) T30 Torx driver

2.0 Fastener Installation

2.1 Remove existing hanger bracket

2.2 Install washer and screw as shown

2.3 Install flange nut on screw holding frame in place as shown. Tighten flange nut to 40-45 in.-lbs. with terminal

wrench.

2.4 Repeat procedure for other side.

2.5 Secure closure to strand per company procedure.

3M and SLiC are trademarks of 3M Company.

All other trademarks are the property of their respective owners.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable,

but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for

your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not

contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless

expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO

OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option,

to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be

liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the

legal theory asserted.

Communication Markets Division

3M Telecommunications

6801 River Place Blvd.

Austin, TX 78726-9000

1-800-426-8688

www.3MTelecommunications.com

Please Recycle. Printed in USA.

78-8140-6276-2-A