KBU8A - KBU8M KBU8A - KBU8M Features * High surge current capability. * Reliable construction technique. * Ideal for printed circuit board. - ~~ + KBU 8.0 Ampere Silicon Bridge Rectifiers Absolute Maximum Ratings* Symbol IF(AV) IFSM PD RJA TA = 25C unless otherwise noted Parameter Value Units 8.0 A Average Rectified Current @ TA = 50C Non-repetitive Peak Forward Surge Current 300 A Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Ambient,** per leg 6.9 55 18 W mW/C C/W RJL Thermal Resistance, Junction to Lead,** per leg 3.0 C/W Tstg Storage Temperature Range -55 to +150 C TJ Operating Junction Temperature -55 to +150 C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on PCB with 0.375 " (9.5 mm) lead length and 0.5 x 0.5" (13 x 13 mm) copper pads. Electrical Characteristics Symbol TA = 25C unless otherwise noted Parameter Device Units 8A 8B 8D 8G 8J 8K 8M VRRM Maximum Repetitive Reverse Voltage 50 100 200 400 600 800 1000 V VRMS Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 700 V VR DC Reverse Voltage (Rated VR) Maximum Instantaneous Reverse Leakage, total TA = 25C bridge @ rated VR TA = 100C Maximum Instantaneous Forward Voltage Drop, per bridge @ 8.0 A 50 100 200 400 600 800 1000 V IRM VFM 2001 Fairchild Semiconductor Corporation 10 500 A A 1.0 V KBU8A-KBU8M, Rev. A1 (continued) Typical Characteristics Forward Current Derating Curve Forward Characteristics 100 FORWARD CURRENT (A) FORWARD CURRENT (A) 8 6 4 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" 9.0 mm LEAD LENGTHS 2 0 0 50 100 AMBIENT TEMPERATURE ( C) 10 1 TA J = 25 C Pulse Width = 300 S 2% Duty Cycle 0.1 0.6 150 Non-Repetitive Surge Current 1.2 1.3 100 250 REVERSE CURRENT ( A) FORWARD SURGE CURRENT (A) 0.8 0.9 1 1.1 FORWARD VOLTAGE (V) Reverse Characteristics 300 200 150 100 50 0 0.7 T A= 100 C 10 1 T A= 25 C 0.1 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) KBU8A-KBU8M, Rev. A1 KBU8A - KBU8M Silicon Bridge Rectifiers KBU Package Dimensions KBU (FS PKG Code R7) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 8.0 0.935(23.7) 0.895(22.7) 0.185(4.7) 0.165(4.2) 0.16(4.1) 0.14(3.6) 0.280(7.1) 0.260(6.6) 0.085(2.2) 45 + + 0.70(17.8) 0.66(16.8) 0.760(19.3) MAX 0.065(1.7) 0.455(11.3) - ~ ~ + 0.405(10.3) 0.165(4.2) 0.150(3.8) 1.0(2.54) MIN 0.260(6.8) 0.180(4.5) 0.220(5.6) 0.180(4.6) 0.052(1.3) 0.048(1.2) July 1999, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DOMETM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST FASTrTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM UHCTM VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. G