ALUMINUM ELECTROLYTIC CAPACITORS HE Miniature Sized, Low Impedance,High Reliability Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C series Low impedance and high reliability withstanding 4000 hours to 10000 hours. Compliant to the RoHS directive (2011/65/EU). HE HD Long Life Specifications Performance Characteristics ltem Category Temperature Range -40 to +105C Rated Voltage Range 6.3 to 100V Rated Capacitance Range 0.47 to 18000F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes' application of rated voltage at 20C, leakage current is not more than 0.01CV or 3 (A), whichever is greater. Rated voltage (V) 6.3 10 16 25 35 50 63 100 120Hz tan (MAX.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08 20C 120Hz Tangent of loss angle (tan ) For capacitance of more than 1000F, add 0.02 for every increase of 1000F. 6.3 10 16 25 35 50 63 100 Z-25C / Z+20C 4 3 2 2 2 2 2 2 Z-40C / Z+20C 8 6 4 3 3 3 3 3 Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) The following specifications shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied at 105C , the peak voltage shall not exceed the rated voltage. D < = 6.3 D = 8 , 10 6.3 to 10WV 4000 hours 6000 hours 8000 hours 16 to 100WV 5000 hours 7000 hours 10000 hours Case size Rated voltage (V) Endurance D > = 12.5 Capacitance change Within 25% of the initial capacitance value tan 200% or less than the initial specified value Leakage current Less than or equal to the initial specified value Printed with white color letter on black sleeve. Marking Radial Lead Type Type numbering system (Example : 10V 1000F) d Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 U HE 1 A 1 0 2 M PD P0.5 D+0.5 MAX. Size code Configuration Capacitance tolerance ( 20%) L+ 15MIN MAX. Rated capacitance (1000F) 4MIN Rated voltage (10V) Pressurerelief vent (6.3up) Series name (mm) (L < 20) 1.5 (L 20) 2.0 D 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 Type Configuration D In case L > 25 for the 12.5 dia. unit, lead dia. d = 0.8mm * Please refer to page 20 about the end seal configuration. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more 0.45 0.55 0.70 0.90 1.00 39 to 330 0.60 0.70 0.85 0.95 1.00 390 to 1000 0.65 0.75 0.90 0.98 1.00 1200 to 18000 0.75 0.80 0.95 1.00 1.00 Cap. (F) 0.47 to 33 Pb-free leadwire Pb-free PET sleeve 5 DD 6.3 8 * 10 12.5 to 18 ED PD HD Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS HE series Standard Ratings V (Code) Item Cap.(F) Code 100 101 150 151 220 221 330 331 470 471 680 681 6.3 (0J) Case size D x L (mm) 5 x 11 6.3 x 11 8 x 11.5 10 (1A) Rated ripple Impedance () MAX. (mArms) 20C / 100kHz -10C / 100kHz 105C / 100kHz 0.58 0.22 0.13 2.3 0.87 0.52 640 10 x 12.5 0.080 0.32 865 1000 102 8 x 15 0.087 0.35 840 1500 152 5 x 11 0.58 2.3 210 6.3 x 11 0.22 0.87 340 8 x 11.5 0.13 0.52 640 8 x 15 0.087 0.35 840 10 x 12.5 0.080 0.32 865 8 x 20 0.069 0.27 1050 10 x 16 0.060 0.24 1210 10 x 20 0.046 0.18 1400 10 x 25 0.042 0.17 1650 12.5 x 15 0.049 0.16 1450 340 821 122 8 x 20 0.069 0.27 1050 10 x 16 0.060 0.24 1210 10 x 20 0.046 0.18 1400 1800 182 12.5 x 15 0.049 0.16 1450 2200 222 10 x 25 0.042 0.17 1650 10 x 31.5 2700 272 3300 332 3900 392 4700 5600 6800 8200 10000 12000 472 562 682 822 103 123 Rated ripple (mArms) 20C / 100kHz -10C / 100kHz 105C / 100kHz Impedance () MAX. 210 820 1200 Case size D x L (mm) 0.031 0.12 1910 12.5 x 20 0.035 0.12 1900 16 x 15 0.042 0.12 1940 18 x 15 0.043 0.11 2210 10 x 31.5 0.031 0.12 1910 16 x 15 0.042 0.12 1940 12.5 x 20 0.035 0.12 1900 12.5 x 25 0.027 0.089 2230 12.5 x 25 0.027 0.089 2230 12.5 x 31.5 0.024 0.078 2650 18 x 15 0.043 0.11 2210 16 x 20 0.027 0.078 2530 12.5 x 31.5 0.024 0.078 2650 12.5 x 35.5 0.020 0.065 2880 12.5 x 35.5 0.020 0.065 2880 12.5 x 40 0.017 0.056 3350 16 x 20 0.027 0.078 2530 16 x 25 0.021 0.060 2930 18 x 20 0.026 0.067 2860 16 x 31.5 0.017 0.050 3450 18 x 25 0.019 0.049 3140 16 x 35.5 0.015 0.044 3610 12.5 x 40 0.017 0.056 3350 16 x 25 0.021 0.060 2930 18 x 20 0.026 0.067 2860 16 x 31.5 0.017 0.050 3450 18 x 31.5 0.015 0.040 4170 16 x 35.5 0.015 0.044 3610 16 x 40 0.013 0.038 4080 18 x 25 0.019 0.049 3140 18 x 35.5 0.014 0.038 4220 16 x 40 0.013 0.038 4080 18 x 40 18 x 31.5 0.015 0.040 0.012 4170 0.032 4280 15000 153 18 x 35.5 0.014 0.038 4220 18000 183 18 x 40 0.012 0.032 4280 : In this case, 6 will be put at 12th digit of type numbering system. : In this case, 3 will be put at 12th digit of type numbering system. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS HE series Standard Ratings V (Code) Item Cap.(F) Code 47 470 56 560 100 101 120 121 220 221 330 331 470 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 471 681 16 (1C) Case size D x L (mm) 5 x 11 6.3 x 11 8 x 11.5 25 (1E) Rated ripple Impedance () MAX. (mArms) 20C / 100kHz -10C / 100kHz 105C / 100kHz 0.58 0.22 0.13 2.3 0.87 0.52 122 152 272 332 392 472 562 5 x 11 0.58 2.3 210 6.3 x 11 0.22 0.87 340 8 x 11.5 0.13 0.52 640 8 x 15 0.087 0.35 840 10 x 12.5 0.080 0.32 865 340 640 8 x 15 0.087 0.35 840 8 x 20 0.069 0.27 1050 10 x 12.5 0.080 0.32 865 10 x 16 0.06 0.24 1210 8 x 20 0.069 0.27 1050 10 x 20 0.046 0.18 1400 10 x 16 0.060 0.24 1210 12.5 x 15 0.049 0.16 1450 10 x 25 0.042 0.17 1650 10 x 20 0.046 0.18 1400 10 x 31.5 0.031 0.12 1910 12.5 x 15 0.049 0.16 1450 12.5 x 20 0.035 0.12 1900 16 x 15 0.042 0.12 1940 18 x 15 0.043 0.11 2210 12.5 x 25 0.027 0.089 2230 12.5 x 31.5 0.024 0.078 2650 16 x 20 0.027 0.078 2530 10 x 25 0.042 0.17 1650 10 x 31.5 0.031 0.12 1910 12.5 x 20 0.035 0.12 1900 16 x 15 0.042 0.12 1940 182 222 Rated ripple (mArms) 20C / 100kHz -10C / 100kHz 105C / 100kHz Impedance () MAX. 210 821 102 Case size D x L (mm) 12.5 x 25 0.027 0.089 2230 12.5 x 35.5 0.020 0.065 2880 18 x 15 0.043 0.11 2210 18 x 20 0.026 0.067 2860 12.5 x 31.5 0.024 0.078 2650 12.5 x 40 0.017 0.056 3350 16 x 20 0.027 0.078 2530 16 x 25 0.021 0.060 2930 12.5 x 35.5 0.020 0.065 2880 16 x 31.5 0.017 0.050 3450 18 x 25 0.019 0.049 3140 16 x 35.5 0.015 0.044 3610 12.5 x 40 0.017 0.056 3350 16 x 25 0.021 0.060 2930 16 x 20 0.026 0.067 2860 18 x 31.5 0.015 0.040 4170 16 x 31.5 0.017 0.050 3450 16 x 40 0.013 0.038 4080 18 x 25 0.019 0.049 3140 18 x 35.5 0.014 0.038 4220 16 x 35.5 0.015 0.044 3610 18 x 31.5 4170 0.012 4280 0.040 18 x 40 0.032 0.015 6800 682 16 x 40 0.013 0.038 4080 8200 822 18 x 35.5 0.014 0.038 4220 10000 103 18 x 40 0.012 0.032 4280 : In this case, 6 will be put at 12th digit of type numbering system. : In this case, 3 will be put at 12th digit of type numbering system. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS HE series ndard Ratings Standard Ratings F) 7 V (Code) V (Code) 35 (1V) 35 (1V) 010 1 010 5 x 11 4 5 x 11 2.5 5 x 11 43 53 3R3 5 x 11 2.2 5 x 11 8.8 2.2 53 8.8 4.7 4R7 5 x 11 1.9 5 x 11 7.6 1.9 88 7.6 100 10 100 5 x 11 1.5 5 x 11 6 1.5 100 6 100 220 22 220 5 x 11 0.70 5 x 11 2.8 0.70 180 2.8 180 330 33 5 x 11 330 0.58 5 x 11 2.3 0.58 210 2.3 6.3 x 11 210 6.3 x 11 0.30 1.2 0.30 295 1.2 295 470 47 6.3 x 11 470 0.22 6.3 x 11 0.87 0.22 250 0.87 6.3 x 11 250 6.3 x 11 0.30 1.2 0.30 295 1.2 295 560 56 6.3 x 11 560 340 0.87 6.3 x 11 340 6.3 x 11 0.30 1.2 0.30 295 1.2 295 0.17 8 x 11.5 0.68 0.17 555 0.68 555 8 x 15 0.12 8 x 15 0.48 0.12 730 0.48 730 0.1210 x 12.5 0.48 0.12 760 0.48 760 8 x 20 0.0918 x 20 0.36 0.091 910 0.36 910 840 10 x 16 865 0.084 10 x 16 0.34 0.084 1050 0.34 1050 0.060 10 x 20 0.24 0.060 1220 0.24 1220 0.061 12.5 x 15 0.20 0.061 1260 0.20 1260 1440 0.22 6.3 x 11 0.87 0.22 0.13 8 x 11.5 0.52 0.13 640 0.52 8 x 11.5 640 0.13 8 x 11.5 0.52 0.13 640 0.52 10 x 12.5 640 120 151 150 8 x 11.5151 0 181 180 0 221 8 x 15 221 220 10 x 12.5 0.0878 x 15 0.35 0.087 840 0.35 0.080 10 x 12.5 0.32 0.080 865 0.32 0 271 2708 x 20 271 0.0698 x 20 0.27 0.069 1050 0.27 0 2.5 3.3 121 0 30 4310 4R7 0 0 3016 3R3 0 0 10 4 2R2 100 8 x 11.5101 0 16 2.2 101 0 5 x 11 2R2 0 0 50 (1H) 50 (1H) Rated Case sizeripple Rated Case size Case size () MAX. Impedance Rated Case size () MAX. Impedance Rated ripple Impedance Impedance ()ripple MAX. ()ripple MAX. Item Item D (mArms) xL D x L D x L D x L (mArms) (mArms) (mArms) (mm) (mm) -10C20C (mm) / 100kHz20C / 100kHz (mm) -10C20C 20C / 100kHz / 100kHz / 100kHz / 100kHz / 100kHz 105C / 100kHz / 100kHz 105C / 100kHz 105C-10C / 100kHz 105C-10C / 100kHz Cap.(F) Code Code 5 x 11 1722 17 22 5.5 5 x 11 5.5 R47 R47 0.47 331 121 181 10 x 16 331 330 10 x 20 471 561 471 470 12.5 x 15 10 x 25 561 560 10 x 31.5 681 12.5 x 20 681 680 16 x 15 821 820 10 x1210 25 0.055 10 x 25 0.22 0.055 1440 0.22 10 x 20 0.060 10 x 20 0.24 0.060 1220 0.24 1220 10 x1400 31.5 0.043 10 x 31.5 0.17 0.043 1690 0.17 1690 1450 0.16 12.5 x 20 1450 16 x 15 0.045 12.5 x 20 0.15 0.045 1660 0.15 1660 0.055 16 x 15 0.17 0.055 1690 0.17 1690 0.034 12.5 x 25 0.11 0.034 1950 0.11 1950 0.054 18 x 15 0.15 0.054 1930 0.15 1930 0.030 12.5 x 31.5 0.10 0.030 2310 0.10 2310 0.060 10 x 16 0.24 0.060 1210 0.24 0.046 10 x 20 0.18 0.046 1400 0.18 0.049 12.5 x 15 0.16 0.049 0.042 10 x 25 0.17 0.042 1650 0.17 12.5 x 25 1650 18 x 15 0.031 10 x 31.5 0.12 0.031 1910 0.12 1910 0.035 12.5 x 20 0.12 0.035 1900 0.12 12.5 x1900 31.5 0.042 16 x 15 0.12 0.042 1940 0.12 1940 0.025 12.5 x 35.5 0.0830.025 2510 0.083 2510 16 x 20 0.034 16 x 20 0.10 0.034 2210 0.10 2210 12.5 x2230 40 0.021 12.5 x 40 0.0690.021 2920 0.069 2920 0.025 16 x 25 0.0750.025 2555 0.075 2555 12.5 x 35.5 821 12.5 x 25 10 x 20 1050 12.5 x 15 0.027 12.5 x 25 0.0890.027 88 2230 0.089 102 18 x 15 102 1000 0.043 18 x 15 0.11 0.043 2210 0.11 16 x2210 25 18 x 20 0.036 18 x 20 0.0970.036 2490 0.097 2490 0.024 12.5 x 31.5 0.0780.024 2650 0.078 16 x2650 31.5 0.022 16 x 31.5 0.0660.022 3010 0.066 3010 122 12.5 x 31.5 122 1200 16 x 20 0.027 16 x 20 0.0780.027 2530 0.078 18 x2530 25 0.026 18 x 25 0.0700.026 2740 0.070 2740 0.019 16 x 35.5 0.0570.019 3150 0.057 3150 0 152 12.5 x 35.5152 1500 0 182 16 x 25 182 1800 12.5 x 40 18 x 20 0.020 12.5 x 35.5 0.0650.020 2880 0.065 16 x2880 35.5 0.017 12.5 x 40 0.0560.017 3350 0.056 0.021 16 x 25 0.0600.021 2930 0.060 3350 16 x 40 2930 0.016 16 x 40 0.0480.016 3710 0.048 3710 0.026 18 x 20 0.0670.026 2860 0.067 18 x2860 31.5 0.021 18 x 31.5 0.0570.021 3635 0.057 3635 3450 18 x 35.5 3140 0.017 18 x 35.5 0.0460.017 3680 0.046 3680 0.014 18 x 40 0.0380.014 3800 0.038 3800 0 222 16 x 31.5 222 2200 18 x 25 0.017 16 x 31.5 0.0500.017 3450 0.050 0.019 18 x 25 0.0490.019 3140 0.049 0 272 16 x 35.5 272 2700 18 x 31.5 0.015 16 x 35.5 0.0440.015 3610 0.044 0.015 18 x 31.5 0.0400.015 4170 0.040 3610 18 x 40 4170 0 332 16 x 40 332 3300 18 x 35.5 0.013 16 x 40 0.0380.013 4080 0.038 4080 0.014 18 x 35.5 0.0380.014 4220 0.038 4220 0 392 18 x 40 392 3900 0.012 18 x 40 0.0320.012 4280 0.032 4280 : In this case, 6 will be: In putthis at 12th case,digit 6 will of type be put numbering at 12th digit system. of type numbering system. : In this case, 3 will be: In putthis at 12th case,digit 3 will of type be put numbering at 12th digit system. of type numbering system. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS HE series Standard Ratings V (Code) Item Cap.(F) Code 6.8 6R8 15 150 27 270 33 330 39 390 47 470 56 560 68 680 82 820 100 120 5 x 11 6.3 x 11 121 151 180 181 330 390 470 2.3 9.3 62 221 271 331 391 471 560 561 680 681 820 821 1000 102 1200 122 1500 152 Case size D x L (mm) Rated ripple (mArms) 20C / 100kHz -10C / 100kHz 105C / 100kHz Impedance () MAX. 5 x 11 2.3 9.3 62 6.3 x 11 1.2 5.0 126 8 x 11.5 0.63 2.8 260 1.2 5.0 126 8 x 15 0.45 2.1 335 8 x 11.5 0.63 2.8 260 10 x 12.5 0.43 1.8 325 8 x 11.5 0.63 2.8 260 8 x 20 0.33 1.6 408 10 x 16 0.31 1.5 400 8 x 15 0.45 2.1 335 10 x 20 0.21 0.94 518 10 x 12.5 0.43 1.8 325 12.5 x 15 0.23 1.1 527 10 x 25 0.20 0.84 595 12.5 x 20 0.20 0.84 740 8 x 20 0.33 1.6 408 10 x 16 0.31 1.5 400 10 x 20 0.21 0.94 518 12.5 x 15 0.23 1.1 527 10 x 25 0.20 0.84 595 0.15 0.71 740 12.5 x 20 0.16 0.64 765 16 x 15 0.14 0.66 895 12.5 x 25 0.12 0.45 875 0.50 1030 10 x 31.5 270 100 (2A) Rated ripple Impedance () MAX. (mArms) 20C / 100kHz -10C / 100kHz 105C / 100kHz 101 150 220 63 (1J) Case size D x L (mm) 18 x 15 0.12 0.15 0.71 740 12.5 x 20 0.16 0.64 765 16 x 15 0.14 0.66 895 12.5 x 25 0.12 0.45 875 10 x 31.5 18 x 15 0.12 0.50 1030 12.5 x 31.5 0.10 0.42 1010 16 x 20 0.091 0.38 1130 12.5 x 35.5 0.083 0.35 1140 16 x 25 0.073 0.27 1350 12.5 x 40 0.071 0.30 1280 18 x 20 0.080 0.30 1300 16 x 31.5 0.054 0.20 1650 18 x 25 0.057 0.21 1560 12.5 x 31.5 0.10 0.42 1010 16 x 35.5 0.045 0.17 1900 16 x 20 0.091 0.38 1130 18 x 31.5 0.047 0.17 1720 12.5 x 35.5 0.083 0.35 1140 16 x 25 0.073 0.27 16 x 40 0.040 1350 0.15 2130 12.5 x 40 0.071 0.30 1280 18 x 20 0.080 0.30 18 x 35.5 0.040 1300 0.15 1890 16 x 31.5 0.054 0.20 1650 18 x 25 0.057 0.21 18 x 40 0.036 1560 0.13 2470 16 x 35.5 0.045 0.17 1900 18 x 31.5 0.047 0.17 1720 16 x 40 0.040 0.15 2130 18 x 35.5 0.040 0.15 1890 18 x 40 0.036 0.13 2470 : In this case, 6 will be put at 12th digit of type numbering system. : In this case, 3 will be put at 12th digit of type numbering system. CAT.8100D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Nichicon: UHE1E101MED1TA UHE1A272MHD1TN UHE1V182MHD3TN UHE1C472MHD6TN UHE1C331MPD1TA UHE1E182MHD6TN UHE1A101MDD1TA UHE1C681MPD1TA UHE2A390MPD1TA UHE1A102MPD1TA UHE1H101MPD1TA UHE1E470MDD1TA UHE1H220MDD1TA UHE1V681MHD3TN UHE1J330MED1TA UHE1H560MED1TA UHE1J121MPD6TD UHE1V271MPD1TA UHE1H121MPD1TA UHE1C471MPD1TA UHE0J682MHD3TN UHE1H561MHD1TO UHE1V151MPD1TA UHE0J682MHD6TN UHE1A471MPD1TA UHE1V271MPD1TD UHE1J181MHD6TO UHE1V330MDD1TA UHE1J271MHD6TO UHE1H271MHD6TO UHE1C392MHD3TN