SPICE MODELS: S3A S3B S3D S3G S3K S3M S3AB S3BB S3DB S3GB S3KB S3MB S3A/B - S3M/B 3.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER Features * * * * * Glass Passivated Die Construction Low Forward Voltage Drop and High Current Capability Surge Overload Rating to 100A Peak B SMB Dim Ideally Suited for Automatic Assembly SMC Min Max Min Max A 3.30 3.94 5.59 6.22 B 4.06 4.57 6.60 7.11 Mechanical Data C 1.96 2.21 2.75 3.18 * * Case: SMB/SMC D 0.15 0.31 0.15 0.31 * * Moisture sensitivity: Level 1 per J-STD-020C Lead Free Finish/RoHS Compliant (Note 3) A * * * * C D Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 J Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 E 5.00 5.59 7.75 8.13 G 0.10 0.20 0.10 0.20 H 0.76 1.52 0.76 1.52 J 2.00 2.62 2.00 2.62 G E H All Dimensions in mm Polarity: Cathode Band or Cathode Notch Marking: Type Number & Date Code, See Page 2 AB, BB, DB, GB, JB, KB, MB Suffix Designates SMB Package A, B, D, G, J, K, M Designates SMC Package Ordering Information: See Page 2 Weight: SMB 0.093 grams (approximate) SMC 0.21 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TT = 75C Symbol S3 A/AB S3 B/BB S3 D/DB S3 G/GB S3 J/JB S3 K/KB S3 M/MB Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 30 70 140 280 420 560 700 V IO 3.0 A Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 100 A Forward Voltage VFM 1.15 V IRM 10 250 A CT 40 pF RqJT 10 C/W Tj, TSTG -65 to +150 C Peak Reverse Current at Rated DC Blocking Voltage @ IF = 3.0A @ TA = 25C @ TA = 125 C Typical Total Capacitance (Note 1) Typical Thermal Resistance Junction to Terminal (Note 2) Operating and Storage Temperature Range Notes: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 2. Thermal resistance: Junction to Terminal, unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pad as heat sink. 3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS16005 Rev. 11 - 2 1 of 3 www.diodes.com S3A/B-S3M/B a Diodes Incorporated Ordering Information (Note 4) Device* Packaging Shipping S3xB-13-F S3x-13-F SMB SMC 3000/Tape & Reel *x = Device type, e.g. S3AB-13-F (SMB package); S3A-13-F (SMC Package). Notes: 4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information YWW XXXX IAV, AVERAGE FORWARD CURRENT (A) 3.0 Resistive or Inductive Load 2.5 2.0 1.5 1.0 0.5 0 25 50 75 100 125 150 IF, INSTANTANEOUS FORWARD CURRENT (A) XXXX = Product type marking code, ex. S5KC = Manufacturers' code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 10 1.0 0.1 0.01 0 TT, TERMINAL TEMPERATURE (C) Fig. 1 Forward Current Derating Curve 0.8 1.2 1.6 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 120 IFSM, PEAK FORWARD SURGE CURRENT (A) 0.4 Single Half-Sine-Wave JEDEC Method 1000 100 100 Tj = 125C 80 10 60 1.0 40 Tj = 25C 0.1 20 0.01 0 0 10 1 NUMBER OF CYCLES AT 60 Hz Fig. 3 Forward Surge Current Derating Curve DS16005 Rev. 11 - 2 20 40 60 80 100 120 140 100 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics 2 of 3 www.diodes.com S3A/B-S3M/B IMPORTANT NOTICE Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT The products located on our website at www.diodes.com are not recommended for use in life support systems where a failure or malfunction of the component may directly threaten life or cause injury without the express written approval of Diodes Incorporated. DS16005 Rev. 11 - 2 3 of 3 www.diodes.com S3A/B-S3M/B