INCH-POUND MS27497P w/AMENDMENT 1 15 November 2012 SUPERSEDING MS27497P 2 February 2012 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, BACK PANEL, WALL MOUNTING FLANGE, CRIMP TYPE, BAYONET COUPLING, SERIES II Reactivated after 24 May 2004 and may be used for new and existing designs and acquisitions. This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. EQUAL WITHIN .015 (8 PLACES) CHAMFERED OR ROUNDED (-4 PLACES) .447+,000 - .005 Lj ,203 ~ MA X I I +.011 ~ .058 - .000 .008 -,012 X 45 2 AB DIA +,000 .3 22 - ,005 (SEE NOTE 5) -$ H 18) GG (R) .005 DIA STYLE P (8) FIGURE 1. Receptacle, classes E, T, and P. AMSC N/A FSC 5935 MS27497P w/AMENDMENT 1 I-- MARKING SURFACE (LOCATION OPTIONAL) F (SEE NOTE6) STYLES FIGURE 1. Receptacle, classes E, T, and P - Continued. 2 MS27497P w/AMENDMENT 1 T +.010 -.005 AB max dia Shell size R BSC S max 8 .297 .828 .547 10 .3595 .954 .672 12 .406 1.047 .844 14 .453 1.141 16 .4845 1.234 1.094 18 .531 1.328 1.219 20 .578 1.453 1.344 22 .625 1.578 1.469 24 .6875 1.703 Shell size .120 .147 L (class E) max length .969 F max .146 .168 1.594 L (class P) max length L (class T) max length .641 .391 .703 .469 8 10 12 14 16 .562 18 20 22 24 FIGURE 1. Receptacle, classes E, T, and P - Continued. 3 MS27497P w/AMENDMENT 1 Inches mm Inches mm Inches mm Inches mm .003 0.08 .406 10.31 .828 21.03 1.359 34.52 .005 0.13 .447 11.35 .844 21.44 1.375 34.92 .008 0.20 .453 11.51 .859 21.82 1.391 35.33 .011 0.28 .469 11.91 .875 22.22 1.453 36.91 .012 0.30 .4845 12.306 .954 24.23 1.469 37.31 .015 0.38 .500 12.70 .969 24.61 1.484 37.69 .020 0.51 .531 13.49 .984 24.99 1.500 38.10 .036 0.91 .547 13.89 1.047 26.59 1.516 38.51 .058 1.47 .562 14.27 1.078 27.38 1.578 40.08 .120 3.05 .578 14.68 1.094 27.79 1.594 40.49 .146 3.71 .609 15.47 1.125 28.58 1.609 40.87 .147 3.73 .625 15.88 1.141 28.98 1.641 41.68 .168 4.23 .641 16.28 1.219 30.96 1.703 43.26 .203 5.16 .672 17.07 1.234 31.34 1.766 44.86 .297 7.54 .6875 17.462 1.250 31.75 1.891 48.03 .322 8.18 .703 17.86 1.266 32.16 2.016 51.21 .3595 9.131 .734 18.64 1.328 33.73 2.204 55.98 .391 9.93 .750 19.05 1.344 34.14 NOTES: 1. Dimensions are in inches 2. Metric equivalents are given for information only. 3. For main keyway and keyway positions, see MIL-DTL-38999. 4. Class E rear accessory thread of shell is external. 5. The gauge feature for GG shall be .010 inch (0.25 mm) smaller than the MMC size at basic location. 6. Maximum panel thickness including mounting hardware. 7. Applicable potting forms for class P: SAE-AS85049/58 and SAE-AS85049/75. FIGURE 1. Receptacle, classes E, T, and P - Continued. 4 MS27497P w/AMENDMENT 1 REQUIREMENTS: Dimensions and configuration: See figure 1. Interface dimensions shall be in accordance with MIL-DTL-38999. This receptacle mates with MS27473, MS27480, MS27484 and MS27500. Procurement specification: MIL-DTL-38999. Insert arrangements: See MIL-STD-1560. For class E, compression nut in accordance with SAE-AS85049/27 shall be included. Part or Identifying Number (PIN) example: MS27497 E 24 F 61 P A MS number Class Shell size Finish Insert arrangement Contact style Polarizing positions No letter is required for normal. Restrictions. Class E is inactive for new design. Class P is inactive for new design for the Air Force. Finish F is not for Navy use. Finish F is inactive for new design for the Air Force. Amendment notations. The margins of this specification are marked with vertical lines to indicate modifications generated by this amendment. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MIL-STD-1560 MS27473 MS27480 MS27484 MS27500 SAE-AS85049/27 SAE-AS85049/58 SAE-AS85049/75 5 MS27497P w/AMENDMENT 1 CONCLUDING MATERIAL Custodians: Army - CR Navy - AS Air Force - 85 DLA - CC Preparing activity: DLA - CC (Project 5935-2012-198) Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 DLA - IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil. 6