Ey SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS @Endurance : 125C 1000 to 5000 hours @Suitable to fit for automotive equipment 125% @Solvent-proof type (10 to 50V), see page16 MVK @SPECIFICATIONS pe tems pe Characterlatiog cocoon ene Sonor th Ra -40 to +125C Rated Voltag 10 to 450Ve Capacitance Tolerance:| +20% (M) (at 20C, 120Hz) Leakage Current. | 10 to 100Vic 160 to 450Vdo DEES oo) 1=0.03CV or 4yA, whichever is greater. 1=0.04CV+100 (160 to 450Vac) ee -l J] Where, |: Max. leakage current (uA), C : Nominal capacitance (uF), V : Rated voltage (V} (at 20C after 2 minutes) Dissipation Factor: | Rated voltage (Va) iov | 16V | 25V | 35V | 50V | 63V | 100V} 160 to 250V | 400 & 450V (tana) ana (Max )}-F80to J40 0.24 | 020f 016] 014[014[ 0.18 | 018 "| K14 to M22 0.22 | 0.18 | 0.16 | 0.14 | 0.12 | 0.14 | 0.10 0.20 0.24 Dies When nominal capacitance exceeds 1000uF, add 0.02 to the value above for each 1000pF increase. (at 20C, 120Hz Low Temperature Rated voltage (Vac) 10V | 16V | 25V | 35V | SOV | 63V | 100V} 160 to 250V | 400 & 450V Characteristics Zi-sscyze20c) 4] 3 | 2 | 2 | 2] 27 2 = = (Max-impetance Rao) | FS0t0 40 TF apeyzaarcy to | 8 |e 14 ]4)4 14 = = : 2(-25T)/Z(+20C}] 4 3 2 2 2 2] 2 3 6 K14t 2 me : 0 Mea Z(-40CVZ(+20T} 8 6 4 3 3 3 3 6 10 (at 120Hz) Endurance: . [| The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for the specified es oli time at 125C. F60 to H63 (10 to 100Vde) = 1000hours H10toJ10 (10 to 100Va) 2000hours K14 to M22 (10 to 100Vdc) . 5000hours K14 to M22 (160 to 450Vae) 2000hours Capacitance change 130% of the initial value Time DF (tans) 300% of the initial specified value be Leakage current SThe initial specified value Shelf Life - The following specifications shal be satisfied when the capacitors are restored to 20C atter expasing them for 1000 hours (500 hours orn for 350 to 450WV) at 125C without voltage applied. Rated voltage(Vac) 10 to 50Vae 63 to 450Va: Capacitance change %+30% of the initial value &+30% of the initial value DE (tana) 300% of the initial specified value | S300% of the initial specified value Leakage current StThe initial specified value 500% of the initial specified value @ DIMENSIONS (Terminal Type=VC) [mm] @MARKING e Gasecode]) DO] LTA TS LO. Ww. LP. EX) 35V47pF in Feo. 1 6.3157 | 66} 66] 7.2] o5to08] 1.9 g | Feo {6317.7 | 66] 66] 72 oStoos| 19 Ss H63- ] 8 | 63] 8S] as] 90] O5too8] 23 8 @ Hio- [ 8 ioc] ss|[es[9o0[ o7to13{ 31 J10- J 10 [10.0}10.5}10.3]11.0] 07to1.1] 4.5 Kita: 2 4125[135]13.0]13.0]137] t.0te1.3] 4.2 L0.3 (Note) ~-K16: 112.5 116.0] 13.0/13.0[13.7] 1.0to1.3] 4.2 Note : L0.5 for H63 to K16 ty] 16 [165] 17.0] 17.0] 18.0] 1.0to1.3] 65 ares .22 1 16 [21.5] 17.0]/17.0] 18.0] 1.0to1.3] 65 EX) 16V1000uF wi7:.-] 18 [165 ]19.0] 19.0] 20.0] 1.0to1.3| 65 a 7 P- M22 | 18 [21.5] 19.0] 19.0] 20.0] 1.0to1.3} 65 JM wo i O [jo e it000 @ 16V S i L: 22 | o [fo 0.3max. +0.5 @PART NUMBERING SYSTEM MVH Tray code (TR: If necessary) CAT. No. 12 SURFACE MOUNT ALUMINUM ELECTROLYTIC CAPACITORS @STANDARD RATINGS we Vide) Qe pe Be pone one ee 95 cs WO F60 3a | 33 66.0 Feo 39 | 33 66.0 H63 62 | 23 46.0 FeO 45 | 33 860 PES eS TSS 46.0 | F60 43 | 33 | 660 }--HOS.]....88.123..1460 7 tig | oo lao | 200 F80 63 | 23 46.0 H63 72 | 23 46.0 - =. J10 1 07 13.4 D cao 7b 38 66 H10 126 | 1.0 20.0 51 p00 ] H10 136 | 1.0 20.0 J10 211 | 07 13.4 SEE Ki4 750 | 0.14 21 330: J10 188 | 07 134 7 | {| | | Kia | 750 | ota | 21 bene new dete enpecce cere |anaccaeed EE K14 750 | 0.14 at L17 | 1,000 | 0.10 15 ereseeen K14 750 | 0.14 21 Ki6 900 | 0.11 15 ATO K14 750 | 0.14 24 p--S---}--SSe ped dd ded EES L17_[ 1,000 | 0.10 15 L17_ | 1,000 | 0.10 15 68002. p Kid [750 | 014 24 J 417 | 1,000 | 0.10 4} | 15] wiz | 1,200 | 0.10 15 poeicees L17__| 1,000 [| 0.10 15 ] Mi7 | 4,200 | 0.10 1.5 4,000] K14 750 | 0.14 2.4 M17 | 1,200 | 0.10 15 M22 | 1,550 | 0.058 | 0.87 Sam L17__{ 1,000 | 0.10 15 4 4 t 4 ese 200: ace saepetoes Peco Sd rl 0 : (Q max.) at -40C, 100kHz Bae war [4300 [oro | ts | M7 4 1200 | Oto | tS ESA (@ max \at 20, 1ookh2 ga00- | M17] 1,200 | 010 | 15 _ Rated Ripple current (mass) at 125, 100kHz ree Case code 4,700] M22 | 1,550 | 0.058 0.87 ESR (Q max.) at -40C, 100kHz ESR (Q max.) at 20C, 100kKHz Rated Ripple current (mArms} a 1250, 100kHz Case code Rated Ripple current (mArms) at 125C, 120Hz Case code CAT. No. 12