High Power Resistors Type SQ Series Key Features I Choice of Styles I Bracketed Types Available I Temp. Op. -55C to +250C I Wide Value Range I Stable TCR 300ppm/C I Custom Designs Welcome I Inorganic Flame Proof Construction This flexible range of Power Wirewound Resistors either have wire or power oxide film elements. The SQ series resistors are wound or deposited on a fine non - alkali ceramic core then embodied in a ceramic case and sealed with an inorganic silica filler. This design provides a resistor with high insulation resistance, low surface temperature, excellent T.C.R., and entirely fire proof construction. These resistors are ideally suited to a range of areas where low cost, and efficient thermal performance are important design criteria. Metal film cores adjusted by laser spiral are used where the resistor value is above that suited to wire. Similar performance is obtained although short time overload is slightly derated. Characteristics - Electrical Test Condition Performance Resistance Temp. Coefficient: -55C ~ 155C 300ppm/C *Short Time Overload: 10 times rated power for 5 seconds 2% Rated Load: Rated power for 30 minutes 1% Voltage Withstand: 1000V AC 1 minute no change Insulation Resistance: 500V megger 1000 Meg Temperature Cycle: -30C ~ 85C for 5 cycles 1% Load Life: 70C on-off cycle for 1000 hours 5% Moisture-proof Load Life: 40C 95% RH on-off cycle 1000 hours 5% Incombustability: 16 times rated wattage for 5 minutes No flame Max. Overload Voltage: 2 times max. working voltage *Metal Film Elements: Short time overload 5 times rated power, 5 seconds Type SQP - Horizontal 35 3 2W: 23 3 d H L W Dimensions H 1 L 1.5 d 0.05 l 0.3 Resistance Range Wire Metal Film o2.7 Power Rating W1 Max. Working Voltage 2W 7 7 18 0.65 23 R10 - 82R 83R - 10K 3W 8 8 22 0.8 35 R10 - 180R 181R - 33K 350V 5W 10 9 22 0.8 35 R10 - 180R 181R - 100K 350V 150V 7W 10 9 35 0.8 35 R10 - 430R 431R - 100K 500V 10W 10 9 48 0.8 35 R10 - 470R 471R - 100K 750V 15W 12.5 11.5 48 0.8 35 R50 - 600R 601R - 150K 1000V 20W - 25W 14 13.5 60 0.8 35 R50 - 1K0 1.1K - 150K 1000V Rated Continuous Working Voltage (RCWV) RCWV: Rated Power x Resistance Value or Maximum Working Voltage listed above whichever is lower 1773285 CIS BI 06/2011 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help High Power Resistors Type SQ Series Type SQH - Horizontal with Faston Connectors Power Rating W1 H1 L 1.5 P Dimensions H1 1 D0.5 P10.2 P20.2 Resistance Range Wire Metal Film 10W 10 10 48 32 1 21 5 2.5 1.7 R50 - 600R 601R - 50K 15W 12.5 11.5 48 32 1 21 5 2.5 1.7 1R0 - 600R 601R - 50K 20W 14.5 13.5 60 42 1 24 6 3.0 2.5 1R0 - 1K0 1K1 - 50K 30W 19 19 75 55 2 31 7.5 - - 1R0 - 2K0 - 40W 19 19 90 67 2 31 7.5 - - 1R0 - 2K0 - Type SQB - Horizontal with Faston Connectors and Bracket Power Rating Dimensions B 0.5 C 0.5 5.0 12.0 10W A 0.5 8.0 G 0.5 3.0 15W 8.0 5.5 12.0 20W 8.0 5.5 12.0 3.0 30W 10.5 8.0 18.0 3.5 40W 10.5 8.0 18.0 3.5 3.0 Power Derating Curve 100 -55 Load Against Temperature -70 300 15W-40W Surface Temperature (C) Rated Load (%) 80 60 40 20 0 -50 0 50 100 150 200 155C 250 7W, 10W 200 5W 150 100 50 250 300 275C 0 Ambient Temperature (C) 0 20 40 06 80 100 Rated Load (%) Type SQM - Vertical Power Rating Dimensions H1 S 1.5 20 7 P 2.0 5 Resistance Range Wire Metal Film R10 - 82R 83R - 10K 2W W1 11 3W 12 25 8 5 R10 - 180R 181R - 33K 5W 13 25 9 5 R10 - 180R 181R - 100K 7W 13 39 9 5 R10 - 430R 431R - 100K 10W 13 51 9 5 R10 - 470R 471R - 100K 10WS 16 35 12 7.5 R10 - 360R 361R - 100K N.B. Custom design versions in wire at low tolerances, better T.C.R., and higher ohmic values are available to special order. Please enquire. 1773285 CIS BI 06/2011 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, go to: te.com/help High Power Resistors Type SQ Series Type SPS - Vertical Mounting with Stabilising Bracket 5.0 5.0 5.0 5.0 2.0 O1.0 R0.2 0.8 Suggested PCB Layout Plan Power Rating 7W Dimension L 1.5 K 0.5 48 8.5 10W 60 Resistance Range Wire Metal Film R10 - 430R 431R - 100K 20 R10 - 470R 471R - 100K Type SQZ - Horizontal Pluggable Power Rating W1 H1 Dimensions L1.5 P1.5 P1 P2 P3 P4 H11 H21 Resistance Range Wire Metal Film 5W 10 10 28 15 4.2 2 5 1.5 25 10.5 R10 - 130R 7W 10 10 36 20 4.2 2 5 1.5 25 10.5 R10 - 430R 431R - 100K 10W 10 10 48 32 4.2 2 5 1.5 25 10.5 R20 - 470R 471R - 100K 15W 12.5 20W-25W* 15 131R - 100K 12 48 32 4.2 2 5 1.5 26 10.5 1R0 - 600R 601R - 150K 13 60 42 7 6 10 2.7 36 15.0 1R0 - 1K0 1K1 - 150K *NB: 20W & 25W Devices Terminations are not crimped Type SQZ - Recommended PCB Hole Dimensions Power Rating a b p 5W 2.0 0.8 15 7W 2.0 0.8 20 10W 2.0 0.8 32 15W 2.0 0.8 32 20W_25W 3.5 1.0 42 How to Order SQP W 20 1R0 F Common Part Element Rated Power Resistance Value Resistance Tolerance SQP - Axial Type SQZ - Pluggable Type SQM - Vertical Type SPS - Vertical Type SQH - Horizontal Type SQB - Horizontal Type (with bracket) 2 - 2 Watts W - Wire R - Metal Film 3 - 3 Watts 5 - 5 Watts etc 0.1 ohm (1 milliohm) R10 1 ohm (1000 milliohms) 1R0 1K ohm (1000 ohms) 1K0 1M ohm (1000000 ohms) 1M0 F - 1% G - 2% J - 5% K - 10% TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: SQMR747KJ