TDN 3-1211WI - TRACO ELECTRONIC AG

www.tracopower.com Page 1 of 3

DC/DC Converter TDN 3WI Series, 3 Watt

Models

The TDN 3WI series with 4:1 input voltage range is a selection of 3 Watt

regulated dc/dc-converters. They come in a very compact DIP package

(13.2  9.1  10.2 mm). The functional I/O-isolation system is designed to meet

IEC/EN 62368-1 with a test voltage (60 s) of 1600 VDC.

Order code Input voltage Output voltage Output current max. Efﬁciency typ.

TDN 3-1210WI 3.3 VDC 700 mA 76 %

TDN 3-1211WI 5.0 VDC 600 mA 80 %

TDN 3-1219WI 9.0 VDC 333 mA 81 %

TDN 3-1212WI 12 VDC 250 mA 83 %

TDN 3-1213WI 4.5 – 18 VDC 15 VDC 200 mA 84 %

TDN 3-1215WI (12 VDC nominal) 24 VDC 125 mA 82 %

TDN 3-1221WI ±5.0 VDC ±300 mA 80 %

TDN 3-1222WI ±12 VDC ±125 mA 82 %

TDN 3-1223WI ±15 VDC ±100 mA 82 %

TDN 3-2410WI 3.3 VDC 700 mA 77 %

TDN 3-2411WI 5.0 VDC 600 mA 80 %

TDN 3-2419WI 9.0 VDC 333 mA 81 %

TDN 3-2412WI 12 VDC 250 mA 83 %

TDN 3-2413WI 9 – 36 VDC 15 VDC 200 mA 83 %

TDN 3-2415WI (24 VDC nominal) 24 VDC 125 mA 82 %

TDN 3-2421WI ±5.0 VDC ±300 mA 80 %

TDN 3-2422WI ±12 VDC ±125 mA 82 %

TDN 3-2423WI ±15 VDC ±100 mA 82 %

TDN 3-4810WI 3.3 VDC 700 mA 77 %

TDN 3-4811WI 5.0 VDC 600 mA 80 %

TDN 3-4819WI 9.0 VDC 333 mA 81 %

TDN 3-4812WI 12 VDC 250 mA 83 %

TDN 3-4813WI 18 – 75 VDC 15 VDC 200 mA 83 %

TDN 3-4815WI (48 VDC nominal) 24 VDC 125 mA 82 %

TDN 3-4821WI ±5.0 VDC ±300 mA 80 %

TDN 3-4822WI ±12 VDC ±125 mA 82 %

TDN 3-4823WI ±15 VDC ±100 mA 82 %

Models

Also see:

TDN 3WISM, SMD version

www.tracopower.com/products/tdn3wism.pdf

• Ultra compact DIP package

13,2  9,1  10,2 mm

• I/O-isolation 1‘600 VDC

• Fully regulated outputs

• Operating temperature range

–40°C to +70°C without derating

• Short circuit protection

• Remote On/Off

• 3-year product warranty

• Designed to meet UL 62368-1

(UL 60950-1)

TDN 3WI Series, 3 Watt

www.tracopower.com Page 2 of 3

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Input Specifications

Input current at no load 12 Vin models: 40 mA typ.

24 Vin models: 25 mA typ.

48 Vin models: 14 mA typ.

Surge voltage (1 s max.) 12 Vin models: 25 V max.

24 Vin models: 50 V max.

48 Vin models: 100 V max.

Reflected ripple current 20 mAp-p typ.

Input filter internal capacitor

Conducted noise EN 55032 class A or class B with external

components (see supporting documents)

ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,

perf. criteria A

Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A

Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A

EN 61000-4-5, ±1 kV perf. criteria A

– External input capacitor all models: Nippon chemi-con KY 220µF/100V

Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A

Power frequency magnetic field EN 61000-4-8, 100 A/M, perf. criteria A

External input fuse required 12 Vin models: 1.6 A (slow blow)

24 Vin models: 0.8 A (slow blow)

48 Vin models: 0.5 A (slow blow)

Output Specifications

Voltage set accuracy ±1 % max.

Voltage balance (dual output models) 1 % max.

Regulation – Input variation 0.2 % max.

– Load variation 0 – 100 % single output: 1 % max.

dual output: 1 % max. (balanced load)

cross regulation - dual output: 5 % max. (asymmetrical load 25 % / 100 %)

Temperature coefficient ±0.02 %/K typ.

Ripple and noise (20 MHz Bandwidth) 50 mVp-p typ.

Start up time – Power ON 10 ms typ. / 20 ms max.

(constant resistive load) – Remote ON 10 ms typ. / 20 ms max.

Transient response (25% load step change) 500 µs typ.

Short circuit protection continuous, automatic recovery

Capacitive load – Single output 3.3 VDC models: 4700 F max.

5.0 VDC models: 2530 F max.

9.0 VDC models: 1470 F max.

12 VDC models: 1220 F max.

15 VDC models: 1000 F max.

24 VDC models: 470 F max.

– Dual output ±5.0 VDC models: 1470 F max. (each output)

±12 VDC models: 680 F max. (each output)

+15 VDC models: 470 F max. (each output)

General Specifications

Temperature ranges – Operating (natural convection: 20 LFM, 0.1m/s) –40°C to +70°C (without derating)

– Case temperature +105°C max.

– Storage temperature –55°C to +125°C

Derating 2.9%/K above 70°C

Humidity (non condensing) 5 – 95 % rel H max.

TDN 3WI Series, 3 Watt

www.tracopower.com

Page 3 of 3

Rev. September 12, 2018

General Specifications

Isolation voltage – I/O isolation voltage (60 sec.) 1’600 VDC

Isolation capacitance (input/output) 50 pF typ.

Isolation resistance (input/output) >1 GOhm

Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) 5‘627‘000 h

Switching frequency 100 kHz min. Pulse frequency modulation.

Thermal shock & vibration MIL-STD-810F

Remote On/Off –On: open circuit or high impedance

–Off: 2 – 4 mA current applied via 1kOhm resistor

–Off idle current: 2.5 mA max.

Safety standards – Designed to meet (no certification) IEC/EN/UL 62368-1, UL 60950-1

Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf

– RoHS RoHS directive 2011/65/EU

Physical Specifications

Casing material non-conducting FR4 (UL 94V-0 rated)

Potting material Silicone (UL 94V-0 rated)

Pin material tinned copper

Package weight 2.7g (0 .10oz )

Soldering temperature max. 260°C / 10 sec.

Outline Dimensions

Pin Single Dual

1+Vin (Vcc) +Vin (Vcc)

2–Vin (GND) –Vin (GND)

4On/Off On/Off

5no con. –Vout

6–Vout Common

7+Vout +Vout

Pin-Out

Dimensions in [mm], () = Inch

Tolerances: x.x ±0.5 (±0.02)

Pin pitch tolerances ±0.25 (±0.01)

pin dimension tolerance ±0.1 (±0.004)

4.5 (0.18)

9.9 (0.39)

10.2 (0.40)

0.6 (0.024)

13.2 (0.52)

5.07 (0.2)

9.1 (0.36)

3 x 2.0

(3 x 0.08)

bottom viev

Supporting Documents: www.tracopower.com/overview/tdn3wi