TB0640L - TB3500L
Document number: DS30359 Rev. 9 - 2 1 of 5
www.diodes.com May 2011
© Diodes Incorporated
TB0640L - TB3500L
30A BIDIRECTIONAL S URFACE MOUNT THYRISTOR SURGE PROTECTIVE DEVICE
Features
• 30A Peak Pulse Current @ 10/1000μs
• 150A Peak Pulse Current @ 8/20μs
• 58 - 320V Stand-Off Voltages
• Oxide-Glass Passivated Junction
• Bidirectional Protection In a Single Device
• High Off-State impedance and Low On-State Voltage
• Helps Equipment Meet GR-1089-CORE, IEC 61000-4-5, FCC
Part 68, ITU-T K.20/K.21, and UL497B
• UL Listed Under Recognized Component Index, File Number
156346
• Lead Free Finish/RoHS Compliant (Note 1)
• Green Molding Compound (No Halogen and Antimony)
(Note 2)
Mechanical Data
• Case: SMB
• Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
• Terminals: Lead Free Plating (Matte Tin Finish). Solderable per
MIL-STD-202, Method 208
• Polarity: None; Bidirectional Devices Have No Polarity Indicator
• Weight: 0.093 grams (approximate)
Ordering Information (Note 3)
Part Number Case Packaging
TB0640L-13-F SMB 3000/Tape & Reel
TB0720L-13-F SMB 3000/Tape & Reel
TB0900L-13-F SMB 3000/Tape & Reel
TB1100L-13-F SMB 3000/Tape & Reel
TB1300L-13-F SMB 3000/Tape & Reel
TB1500L-13-F SMB 3000/Tape & Reel
TB1800L-13-F SMB 3000/Tape & Reel
TB2300L-13-F SMB 3000/Tape & Reel
TB2600L-13-F SMB 3000/Tape & Reel
TB3100L-13-F SMB 3000/Tape & Reel
TB3500L-13-F SMB 3000/Tape & Reel
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
2. Product manufactured with Data Code 0924 (week 24, 2009) and newer are built with Green Molding Compound.
3. For packaging details, go to our website at http://www.diodes.com.
Marking Information
Green
Top View Bottom View
xxxxx = Product type marking code (See Table on Page 2)
= Manufacturers’ code marking
YWW = Date code marking
Y = Last digit of year (ex: 2 for 2002)
WW = Week code (01 ~ 53)
YWW
xxxxx
TB0640L - TB3500L
Document number: DS30359 Rev. 9 - 2 2 of 5
www.diodes.com May 2011
© Diodes Incorporated
TB0640L - TB3500L
Maximum Ratings @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Non-Repetitive Peak Impulse Current @10/1000us I
pp
30 A
Non-Repetitive Peak On-State Current @8.3ms (one-half cycle) ITSM 15 A
Typical Positive Temperature Coefficient for Breakdown Voltage ΔVBR/ΔTJ 0.1 %/°C
Thermal Characteristics
Characteristic Symbol Value Unit
Thermal Resistance, Junction to Lead R
θ
JL 30 °C/W
Thermal Resistance, Junction to Ambient R
θ
JA 120 °C/W
Junction Temperature Range TJ -40 to +150 °C
Storage Temperature Range TSTG -55 to +150 °C
Maximum Rated Surge Waveform
Waveform Standard Ipp (A)
2/10 us GR-1089-CORE 200
8/20 us IEC 61000-4-5 150
10/160 us FCC Part 68 100
10/700 us (Note 4) ITU-T, K.20/K.21 60
10/560 us FCC Part 68 50
10/1000 us GR-1089-CORE 30
Notes: 4. Applied 2kV, 10/700 us waveform
I , PEAK PULSE CURRENT (%)
PP
Peak Value (I )
pp
Half Value
t = rise time to peak value
t = decay time to half value
r
p
t
r
t
p
Electrical Characteristics @TA = 25°C unless otherwise specified
Part Number
Maximum
Rated
Repetitive
Off-State
Voltage
Maximum
Off-State
Leakage
Current @
VDRM
Maximum
Breakover
Voltage
Maximum
On-State
Voltage
@ IT = 1A
Breakover Current
IBO Holding Current
IH
Typical
Off-State
Capacitance Marking
Code
VDRM (V) IDRM (uA) VBO (V) VT (V) Min
(mA) Max
(mA) Min
(mA) Max
(mA) CO (pF)
TB0640L 58 5 77 3.5 50 800 150 800 100 T064L
TB0720L 65 5 88 3.5 50 800 150 800 100 T072L
TB0900L 75 5 98 3.5 50 800 150 800 100 T090L
TB1100L 90 5 130 3.5 50 800 150 800 60 T110L
TB1300L 120 5 160 3.5 50 800 150 800 60 T130L
TB1500L 140 5 180 3.5 50 800 150 800 60 T150L
TB1800L 160 5 220 3.5 50 800 150 800 60 T180L
TB2300L 190 5 265 3.5 50 800 150 800 40 T230L
TB2600L 220 5 300 3.5 50 800 150 800 40 T260L
TB3100L 275 5 350 3.5 50 800 150 800 40 T310L
TB3500L 320 5 400 3.5 50 800 150 800 40 T350L
TB0640L - TB3500L
Document number: DS30359 Rev. 9 - 2 3 of 5
www.diodes.com May 2011
© Diodes Incorporated
TB0640L - TB3500L
Electrical Characteristics @TA = 25°C unless otherwise specified
Symbol Parameter
VDRM Stand-off Voltage
IDRM Leakage current at stand-off voltage
VBR Breakdown voltage
IBR Breakdown current
VBO Breakover voltage
IBO Breakover current
IH Holding current (Note 5)
VT On state voltage
IPP Peak pulse current
CO Off-state capacitance (Note 6)
Notes: 5. IH > (VL/RL) If this criterion is not obeyed, the TSPD triggers but does not return correctly to high-resistance state. The surge recovery time does not
exceed 30ms.
6. Off-state capacitance measured at f = 1.0MHz, 1.0VRMS signal, VR = 2VDC bias.
I
BO
V
BR
V
DRM
V
T
V
BO
I
H
I
V
I
BR
I
DRM
I
PP
I , OFF-STATE CURRENT (uA)
(DRM)
T , JUNCTION TEMPERATURE (°C)
Fig . 1 Off-St ate Curre nt vs. Junc tion Temp erature
J
0.001
0.01
1
0.1
10
100
-25 025 50 75 100 125 150
V = 50V
DRM
0.9
T , JUNCTION TEMPERATURE (°C)
Fig . 2 Relative Variation of B r eakdow n Volt age
vs. Ju nction Tem peratu re
J
0.95
1
1.05
1.1
1.15
1.2
-50 -25 0 25 50 75 100 125 150 175
N
O
R
MALIZED B
R
EAKD
O
WN V
O
L
T
A
G
E
TB0640L - TB3500L
Document number: DS30359 Rev. 9 - 2 4 of 5
www.diodes.com May 2011
© Diodes Incorporated
TB0640L - TB3500L
1
1.05
0.95
-50
N
O
R
MALIZED B
R
EAKD
O
W
N
V
O
L
T
A
G
E
1.1
-25 07550
25 125100 175
150
T , JUNCTION TEMPERATURE
Fig . 3 Re la tive Vari at io n of Brea kover Voltag e
vs. Junction Temperature
J
(ºC)
1
10
100
12543769
8
I,
O
N
-S
T
A
T
E
C
U
R
R
E
N
T
(A)
T
V , ON-STATE VOL TAGE (V)
Fig. 4 On-State Current vs. On-State Voltage
T
T = 25°C
j
0
0.5
1
1.5
2
-50 -25 025 50 10075 125
N
O
R
MALIZED
H
O
LDI
N
G
C
U
R
R
E
N
T
T , JUNCTION TEMPERATURE (°C)
J
Fig. 5 Relative Variation of Holding Current vs.
Junction Temper ature
0.1
1
110100
N
O
R
MALIZED
C
A
P
A
C
I
T
A
N
C
E
V , REVERSE VOL TAGE (V)
Fig. 6 Relative Variation of Junction Capacitance
vs. R everse Volt age Bias
R
Package Outline Dimensions
SMB
Dim Min Max
A 3.30 3.94
B 4.06 4.57
C 1.96 2.21
D 0.15 0.31
E 5.00 5.59
G 0.05 0.20
H 0.76 1.52
J 2.00 2.50
All Dimensions in mm
A
B
C
D
G
H
E
J
TB0640L - TB3500L
Document number: DS30359 Rev. 9 - 2 5 of 5
www.diodes.com May 2011
© Diodes Incorporated
TB0640L - TB3500L
Suggested Pad Layout
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated p roducts for any unintended or una uthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign p atents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their pro ducts and an y
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2011, Diodes Incorporated
www.diodes.com
SMB
Dimensions Value (in mm)
Z 6.8
G 1.8
X 2.3
Y 2.5
C 4.3
Z
X
C
G
Y
