Customer Specification

PART NO. LC-134

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com

1) Construction

 a) Material Nylon, high tenacity, continuous filament

 b) Type I

 c) Size 4

 d) Finish B – Microcrystalline fungicide wax, mercury and copper free

 e) Dimensions 0.060 +/- 0.006" x 0.014 +/- 0.003"

hazardous substances in electrical and electronic equipment. No

Exemptions are required for RoHS Compliance on this item. Consult Alpha

Wire's web site forRoHS C of C.

2) REACH Regulation (EC 1907/2006):

This product does not contain any of the 16 substances listed on the

European Union's REACH Substance of Very High Concern (SVHC)

candidate list in excess of 0.1% mass of the item.

3) California Proposition 65: The outer surface materials used in the manufacture of this part meet the

requirements of California Proposition 65.

 a) Breaking Strength 25 Lbs. Min.

 b) Elongation 40% Max.

 c) Finish Weight 15% - 32%

 d) Temperature Range -55°C to 121°C

1) Standard Packaging

 a) 500 Yard Spools King Bobbin

 b) Length Tolerance +10/-3%

Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure there accuracy at the time of publication,

information and specifications described herein are subject to errors or omissions and to changes without notice, and

the listing of such information and specifications does not ensure product availability.

Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties,

whether express, statutory or implied. In no event will Alpha be liable for any damages (including consequential,

indirect, incidental, special, punitive, or exemplary) whatsoever, even if Alpha had been advised of the possibility of

such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection

with the use, or inability to use, the information or specifications described herein.

ALPHA WIRE - CONFIDENTIAL AND PROPRIETARYNotice to persons receiving this document and/or technical

information. This document is confidential and is the exclusive property of ALPHA WIRE, and is merely on loan and

To Whom It May Concern:

Alpha Wire Part Number: LC-134

LC-134, RoHS-Compliant Commencing With 1/1/1982 Production

Note: all colors and put-ups

This document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the

European Parliament, better known as the RoHS Directive (commonly known as RoHS 2), with regards to restrictions of the use

of certain hazardous substances used in the manufacture of electrical and electronic equipment. This certification extends to

amending Directive 2015/863/EU which expanded the list of restricted substances to 10 items (commonly known as RoHS 3) The

reader is referred to these Directives for the specific definitions and extents of the Directives. No Exemptions are required for

RoHS Compliance on this item. Additionally, Alpha certifies that the listed part number is in compliance with China RoHS

Polybrominated Biphenyls (PBB) 0.1% by weight (1000 ppm)

Polybrominated Diphenyl Ethers (PBDE) ,

Including Deca-BDE 0.1% by weight (1000 ppm)

Bis(2-ethylhexyl) phthalate (DEHP) 0.1% by weight (1000 ppm)

Butyl benzyl phthalate (BBP) 0.1% by weight (1000 ppm)

Dibutyl phthalate (DBP) 0.1% by weight (1000 ppm)

Diisobutyl phthalate (DIBP) 0.1% by weight (1000 ppm)

The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief

at the date of its release. The information provided is designed only as a general guide for the safe handling, storage, and any

other operation of the product itself or the one that it will become part of. The intent of this document is not to be considered a

Elizabeth, NJ 07207

Tel: 1-908-925-8000