MACP-010573 Temperature Compensated Directional Power Detector 10 - 30 GHz Features Rev. V1 Functional Schematic Integrated Directional Coupler Low Insertion Loss: 0.40 dB @ 20 GHz Min. detectable power: -18 dBm @ 20 GHz Built-In Temperature Compensation Lead-Free 1.5 x 1.2 mm 6-Lead TDFN Plastic Package Halogen-Free "Green" Mold Compound RoHS* Compliant and 260C Reflow Compatible Description The MACP-010573 belongs to a series of small, easy-to-use, broadband, directional detectors. With integrated low loss directional couplers and built-in temperature compensation circuits, these detectors provide an easy way to monitor the power of a signal travelling in a specific direction along a transmission line. Detectors are housed in a miniature, surface mount, lead less plastic package. They require a small amount of bias for proper performance. The total bias current is less than 0.5 mA. Directional Coupler RFIN 1 N/C 2 VBIAS 3 Termination Detector Engine 6 RFOUT 5 N/C 4 VDET 77 GND Pin Configuration3 Typical applications include power monitoring and leveling in Point-to-Point radios, IMS, Radar, VSAT, EW, and Aerospace & Defense systems. The surface mount package is small yet can be handled and placed with standard pick and place assembly equipment. Detectors are fabricated on a well established GaAs process featuring full passivation for performance and reliability. 1 RFIN RF Input 2 N/C No Connection3 3 VBIAS Bias Voltage 4 VDET Detector Voltage 5 N/C No Connection3 6 RFOUT RF Output 7 GND Ground 3. Pins 2 and 5 are not connected internally and should not be used for grounding. Package has exposed bottom metal paddle (Pin 7) which should be connected to the circuit ground. The parasitic inductance introduced by this connection should be as small as possible. Ordering Information1,2 MACP-010573-TR1000 1000 Part Reel MACP-010573-001SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0018081 MACP-010573 Temperature Compensated Directional Power Detector 10 - 30 GHz Rev. V1 Electrical Specifications: Freq. = 20 GHz, TA = 25C, VB = +3.2 V, Z0 = 50 (unless otherwise specified) Insertion Loss 10 GHz 20 GHz 30 GHz dB -- Detect Voltage 10 dBm applied to Input 10 GHz 20 GHz 30 GHz mV -- Directivity Into 50 load 10 GHz 20 GHz 30 GHz dB -- Sensitivity Minimum recommended power level 10 GHz 20 GHz 30 GHz dBm -- Maximum Power Maximum recommended power level 10 - 30 GHz dBm -- 30 -- Input Return Loss 10 - 30 GHz dB -- 15 -- Output Return Loss 10 - 30 GHz dB -- 18 -- DC Offset Detect voltage with no RF input power mV 50 100 150 Bias Current V Bias = 3.2 V mA -- 0.3 0.35 Absolute Maximum Ratings4,5 Input Power 40 dBm Operating Voltage 8V Operating Temperature -40C to +85C Storage Temperature -65C to +150C 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. MACOM does not recommend sustained operation near these survivability limits. 0.15 0.40 0.90 -- 240 495 745 -- 16.5 13.0 11.5 -- -13 -18 -21 -- Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these HBM Class 0A devices. 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0018081 MACP-010573 Temperature Compensated Directional Power Detector 10 - 30 GHz Application Information The MACP-010573 is designed to deliver high performance and to be easy to use. Rev. V1 Recommended PCB Configuration No external components are needed. The RF connections required by the MACP-010573 are shown in a schematic below. Pin 1 should be connected to the RF input signal. Pin 6 is the RF output. The third required connection is that to the RF ground. The exposed metal paddle on the back of the package must be connected to the RF ground of the board housing the detector. This can be accomplished by using conductive via holes. It is important to ensure that the parasitic inductance associated with the connection between the detector and the RF ground is as small as possible. The RF ground also provides the return path for the DC bias current. Evaluation Board MACP-010573 RFIN (Pin 1) RFOUT (Pin 6) DC Bias MACOM will supply an evaluation board and loose samples upon qualified request. The kit consists of a PCB and SMA connectors. MACOM suggests a Rogers 4350 dielectric of 0.008" (0.20 mm) with 1/2 ounce copper. Proper grounding is always important, we suggest 8 mil (0.20 mm) vias placed generously underneath the part. The MACP-010573 operates with a positive 3.2 V bias applied to pin 3. The output voltage is available on pin 4. 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0018081 MACP-010573 Temperature Compensated Directional Power Detector 10 - 30 GHz Rev. V1 Typical Performance Curves: Insertion Loss Detect Voltage vs. Input Power 0 4 10 GHz 20 GHz 30 GHz 3 -0.4 VDET (V) S21 (dB) -0.2 -0.6 1 +25C -40C +85C -0.8 -1 0 5 2 10 15 20 25 0 -10 30 0 Frequency (GHz) 30 Output Return Loss 0 0 +25C -40C +85C -10 +25C -40C +85C -10 -20 -20 S22 (dB) S11 (dB) 20 Input Power (dBm) Input Return Loss -30 -30 -40 -40 -50 -50 -60 0 5 10 15 20 25 -60 30 0 5 10 Frequency (GHz) 15 20 25 30 Frequency (GHz) Temperature Compensation Accuracy Directivity 30 Total Percentage Error (%) 25 20 Directivity (dB) 10 15 10 +25C -40C +85C 5 0 10 15 20 Frequency (GHz) 25 30 10 GHz 20 GHz 30 GHz 20 10 0 -10 -5 0 5 10 15 20 Input Power (dBm) 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0018081 MACP-010573 Temperature Compensated Directional Power Detector 10 - 30 GHz Rev. V1 Lead-Free 1.5 x 1.2 mm 6-Lead TDFN All dimensions are in inches/mm. Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 5 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0018081 MACP-010573 Temperature Compensated Directional Power Detector 10 - 30 GHz Rev. V1 MACOM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 6 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0018081