AYF53 For FPC/FFC* FPC connectors (0.5mm pitch) Back lock Y5B/Y5BW Series FEATURES 1. Low profile, space saving back lock type with improved lever operability 2. Mechanical design freedom achieved by top and bottom double contacts 3. Wide selection, including a type with a small number of pins Low profile and space saving design of 1.0 mm high and 3.20 mm deep (3.70 mm with lever) Y5B and Y5BW can have a minimum of four and two contacts respectively, maximum reduction in design packaging. Y5B Y5BW 1.00 Structure to lock notches on both ends of the FPC with holding contacts Applicable FPC shape With notches (1) The inserted FPC can be temporarily held until the lever is closed. (2) When the lever is closed, the holding contacts lock the FPC by its through-holes and notches, enhancing the FPC holding force. * (Y5BW is compatible with FPC only.) Unit: mm 0 3.2 APPLICATIONS 4 pin contacts (Y5B: minimum) * Wiring patterns can be located underneath the connector. * Man-hours for assembly can be reduced by delivering the connectors with their levers opened. * Y5BW features advanced functionality, including a structure to temporarily hold the FPC and a higher holding force. The FPC holding contacts located on both ends of the connector facilitate positioning of FPC and further enhance the FPC holding force. A wide range of digital equipment, including mobile phones, smartphones, PCs, digital still camera, and digital video camera. Ideal for touch panels and LCD backlights, which require connectors with a small number of pins. ORDERING INFORMATION AYF 5 3 5 53: FPC Connector 0.5 mm pitch (Back lock) Number of pins (2 digits) Function 3: Top and bottom double contacts (Y5B) 6: Top and bottom double contacts, lock holding type (Y5BW) Surface treatment (Contact portion / Terminal portion) 5: Au plating/Au flash plating (Ni barrier) ds_65315_en_y5b_y5bw: 311012J 1 AYF53 PRODUCT TYPES Y5B Height Y5BW Number of pins Part number Number of pins Part number 4 5 6 8 10 12 14 16 24 28 30 32 34 40 42 50 AYF530435 AYF530535 AYF530635 AYF530835 AYF531035 AYF531235 AYF531435 AYF531635 AYF532435 AYF532835 AYF533035 AYF533235 AYF533435 AYF534035 AYF534235 AYF535035 2 3 4 6 8 10 12 14 22 26 28 30 32 38 40 48 AYF530265 AYF530365 AYF530465 AYF530665 AYF530865 AYF531065 AYF531265 AYF531465 AYF532265 AYF532665 AYF532865 AYF533065 AYF533265 AYF533865 AYF534065 AYF534865 1.0 mm Packing Inner carton (1-reel) Outer carton 5,000 pieces 10,000 pieces Notes: 1. Order unit; For volume production: 1-inner carton (1-reel) units Samples for mounting check: 50-connector units. Please contact our sales office. 2. Please contact our sales office for connectors having a number of pins other than those listed above. SPECIFICATIONS 1. Characteristics Electrical characteristics Mechanical characteristics Item Rated current Rated voltage Insulation resistance Specifications 0.5A/pin contact (Except for holding contact) 50V AC/DC Min. 1,000M (initial) Breakdown voltage 250V AC for 1 min. Contact resistance Max. 100m FPC holding force Ambient temperature Storage temperature Y5B: Min. 0.2N/pin contacts pin contacts (initial) Y5BW: Min. 0.2N/pin contacts pin contacts + 2.0N (initial) -55C to +85C -55C to +85C (product only) -40C to +50C (emboss packing) Conditions Using 250V DC megger (applied for 1 min.) No short-circuiting or damage at a detection current of 1 mA when the specified voltage is applied for one minute. Based on the contact resistance measurement method specified by JIS C 5402. Measurement of the maximum force applied until the inserted compatible FPC is pulled out in the insertion axis direction while the connector lever is closed No freezing at low temperatures. No dew condensation. Conformed to MIL-STD-202F, method 107G Thermal shock resistance (with FPC inserted) 5 cycles, insulation resistance min. 100M, contact resistance max. 100m Environmental characteristics Humidity resistance (with FPC inserted) Saltwater spray resistance (with FPC inserted) H2S resistance (with FPC inserted) Soldering heat resistance Lifetime characteristics Unit weight Insertion and removal life Order Temperature (C) 1 -55 -30 2 3 85 +30 4 -55 -30 Time (minutes) 30 Max. 5 30 Max. 5 120 hours, insulation resistance min. 100M, contact resistance max. 100m 24 hours, insulation resistance min. 100M, contact resistance max. 100m 48 hours, contact resistance max. 100m Peak temperature: 260C or less 300C within 5 sec. 350C within 3 sec. Bath temperature 402C, gas concentration 31 ppm, humidity 75 to 80% R.H. Reflow soldering Soldering iron 20 times Repeated insertion and removal: min. 10 sec./time Bath temperature 402C, humidity 90 to 95% R.H. Bath temperature 352C, saltwater concentration 51% Y5B (50 pin contacts): 0.16 g 2. Material and surface treatment Part name Molded portion Material Housing: LCP resin (UL94V-0) Lever: LCP resin (UL94V-0) Contact Copper alloy Holding contact portion Soldering terminal portion Copper alloy Copper alloy 2 Surface treatment -- Contact portion; Base: Ni plating, Surface: Au plating Terminal portion; Base: Ni plating, Surface: Au plating Terminal portion; Base: Ni plating, Surface: Au plating Base: Ni plating, Surface: Au plating ds_65315_en_y5b_y5bw: 311012J AYF53 DIMENSIONS (Unit: mm) Interested in CAD data? You can obtain CAD data for all products with a mark from your local Panasonic Electric Works representative. CAD Data Y5B A 0.500.10 1.000.10 (3.70) Number of pins/ dimension 4 A B C 4.00 3.36 1.50 5 6 8 10 12 14 16 24 28 30 32 34 40 42 50 4.50 5.00 6.00 7.00 8.00 9.00 10.00 14.00 16.00 17.00 18.00 19.00 22.00 23.00 27.00 3.86 4.36 5.36 6.36 7.36 8.36 9.36 13.36 15.36 16.36 17.36 18.36 21.36 22.36 26.36 2.00 2.50 3.50 4.50 5.50 6.50 7.50 11.50 13.50 14.50 15.50 16.50 19.50 20.50 24.50 (1.76) 1.60 (Suction area) Terminal coplanarity 0.30 0.1 0.50 (Contact and soldering terminals) B0.20 2.90 3.20 (0.15) (1.50) (FPC insertion depth) (0.32) (0.15) C0.20 Y5B RECOMMENDED FPC/FFC DIMENSIONS (Finished thickness: t = 0.30.03) The conductive parts should be based by Ni plating and then Au plating. Number of pins/ dimension 4 1.50 5 6 8 10 12 14 16 24 28 30 32 34 40 42 50 2.00 2.50 3.50 4.50 5.50 6.50 7.50 11.50 13.50 14.50 15.50 16.50 19.50 20.50 24.50 (A+1)0.05 A0.03 20 0. R 0.300.03 2.50 min. (Reinforcing plate) (FPC) 0.350.03 (FFC) 0.300.03 1.50 min. (Exposed part of the conductor) 0.500.07 0.500.03 Cutting direction Cut FPC from the copper foil side to the reinforcing plate side. A Y5BW A 3.70 1.60 (Suction area) (1.76) 1.000.10 0.500.10 Terminal coplanarity B0.20 0.1 (0.30) (Contact, holding (0.50) contact and soldering terminals) (0.15) ds_65315_en_y5b_y5bw: 311012J D0.20 C0.20 (0.32) (0.15) (0.32) (0.15) 2.90 3.20 (1.50) (FPC insertion depth) Number of pins/ dimension 2 A B C D 4.00 3.36 1.50 0.50 3 4 6 8 10 12 14 22 26 28 30 32 38 40 48 4.50 5.00 6.00 7.00 8.00 9.00 10.00 14.00 16.00 17.00 18.00 19.00 22.00 23.00 27.00 3.86 4.36 5.36 6.36 7.36 8.36 9.36 13.36 15.36 16.36 17.36 18.36 21.36 22.36 26.36 2.00 2.50 3.50 4.50 5.50 6.50 7.50 11.50 13.50 14.50 15.50 16.50 19.50 20.50 24.50 1.00 1.50 2.50 3.50 4.50 5.50 6.50 10.50 12.50 13.50 14.50 15.50 18.50 19.50 23.50 3 AYF53 Y5BW RECOMMENDED FPC DIMENSIONS (Finished thickness: t = 0.30.03) The conductive parts should be based by Ni plating and then Au plating. Notches type R0.20R 0.20 R0 .25 ma x. 3 4 6 8 10 12 14 22 26 28 30 32 38 40 48 1.00 1.50 2.50 3.50 4.50 5.50 6.50 10.50 12.50 13.50 14.50 15.50 18.50 19.50 23.50 *1 Not interfere conductor 2.50 min. (Reinforcing plate) x. ma .25 R0 0.50 *1 0.700.05 0.300.03 .20 R0 0.800.05 1.300.10 1.50 min. (Conductor exposed area) (A+2)0.05 A0.03 0.500.03 (Pitch) 0.350.03 1.000.07 Number of pins/ dimension 2 Cutting direction (*2) (*2) Cut FPC from the copper foil side to the reinforcing plate side. A EMBOSSED TAPE DIMENSIONS (Unit: mm) (Common for respective contact type) * Specifications for taping Tape I Tape II (A0.3) (A0.3) (C) (D1) (B) Taping reel Top cover tape (1.75) Embossed carrier tape 380 dia. (2.0) (4.0) (1.75) (2.0) (4.0) Leading direction after packaging (B) * Specifications for the plastic reel (In accordance with EIAJ ET-7200B.) Embossed mounting-hole 8.0 (8.0) Label 1.5 .1 +0 0.0 50 1. 0 +00.1 .0 dia a. di . * Y5B Dimension table (Unit: mm) Number of pins 4 to 10 12 to 30 32 to 34 40 to 50 Type of taping Tape I Tape I Tape II Tape II A 16.0 24.0 32.0 44.0 B 7.5 11.5 14.2 20.2 C - - 28.4 40.4 D 17.4 25.4 33.4 45.4 Quantity per reel 5,000 5,000 5,000 5,000 A 16.0 24.0 32.0 44.0 B 7.5 11.5 14.2 20.2 C - - 28.4 40.4 D 17.4 25.4 33.4 45.4 Quantity per reel 5,000 5,000 5,000 5,000 * Y5BW Dimension table (Unit: mm) Number of pins 2 to 8 10 to 28 30 to 32 38 to 48 Type of taping Tape I Tape I Tape II Tape II * Connector orientation with respect to embossed tape feeding direction Type Direction of tape progress 4 Y5B Y5BW ds_65315_en_y5b_y5bw: 311012J AYF53 NOTES 1. Recommended PC board and metal mask patterns Connectors are mounted with high pitch density, intervals of 0.3 mm or 0.5 mm. In order to reduce solder bridges and other issues make sure the proper levels of solder is used. The figures to the right are recommended metal mask patterns. Please use them as a reference. * Y5B/Y5BW 0.500.03 0.300.03 00.03 00.03 0.800.03 0.800.03 Recommended PC board pattern (mounting layout) (TOP VIEW) 1.000.03 Recommended metal mask pattern 0.500.01 00.01 00.01 1.000.01 0.800.01 0.310.01 Metal mask thickness: Here, 120m (Terminal portion opening area ratio: 31.8%) (Soldering terminal portion opening area ratio: 100%) 0.250.01 2. Precautions for insertion/removal of FPC Do not apply an excessive load to the lever in the opening direction beyond its open position; otherwise, the lever may be deformed or removed. Do not open/close the lever without an FPC inserted; otherwise, the terminals may be deformed, and the FPC insertion force may increase. Do not apply an excessive load to the lever in a direction perpendicular to the lever rotation axis or in the lever opening direction; otherwise, the terminals may be deformed, and the lever may be removed. These connectors are of the back lock type, which has the FPC insertion section on the opposite side of the lever. Carefully place the FPC in the insertion position or the lever opening/closing position. Otherwise, a contact failure or connector breakage may occur. These connectors have top and bottom double contacts. Do not insert an FPC upside down. Inserting an FPC in a direction opposite to that you intended may cause an operation failure or malfunction. Fully open the lever to insert an FPC. Completely insert the FPC horizontally. An FPC inserted at an excessive angle to the board may cause the deformation of metal parts, FPC insertion failures, and FPC circuit breakages. Insert the FPC to the full depth of the connector without altering the angle. To close the lever, turn down the lever by pressing the entire lever or both sides of the lever with fingers tips. If pressure to the lever is applied unevenly, such as to an edge only, it may deform or break. Also, make sure that the lever is closed completely. Not doing so will cause a faulty connection. Avoid applying an excessive load to the top of the lever during or after closing the lever. Otherwise, the terminals may be deformed. When opening the lever to remove the FPC, ensure that the lever will not go over the initial position; otherwise, the lever may be removed. Remove the FPC at parallel with the lever fully opened. If the lever is closed, or if the FPC is forcedly pulled, the product or FPC may break. If a lever is accidentally detached during the handling of a connector, do not use the connector any longer. After an FPC is inserted, carefully handle it so as not to apply excessive stress to the base of the FPC. 3. Cautions for using Y5BW The holding contacts cannot be used as conductors. The holding contacts are located on both ends of the contacts, and the shape of the soldered portions is the same as that of the other contacts. Use caution to ensure connect identification. Please refer to the latest product specifications when designing your product. For Cautions for Use, see the "GENERAL NOTES FOR USING FPC CONNECTORS" in the Connector Technical Information. For other details, please verify with the product specification sheets. ds_65315_en_y5b_y5bw: 311012J 5