CATALOGUE

Products

Leading position in power supplies

Continuous further development of our high-quality products,

their innovative design, and our technical expertise have made

CEAG AG/FRIWO Group a reliable and experienced industry partner

worldwide. Highly qualified, flexible employees guarantee the

of the Group’s high level of expertise and innovative ability.

CEAG AG/FRIWO Group

FRIWO is the wholly owned subsidiary of CEAG AG. Listed in

the Prime Standard, CEAG AG is the holding company of the

FRIWO Group, with its registered office in Bad Homburg and

headquarters in Ostbevern/Westphalia. As such, it is the world’s

leading provider – through the FRIWO brand – of charging

units for mobile phones. The major shareholder of CEAG AG is

DELTON AG with almost 77 percent of the share capital.

Asia, Shanghai Asia, Tokyo Asia, Seoul North America,

South America, São Paulo

All devices are tested for operational safety in our own accredited

testing centres and leave our factories as “zero-fault products“.

FRIWO power supply and charger platforms are approved in

Europe, USA, Canada, Japan and Australia without further

RoHS:

FRIWO completely abandoned the use

of environmentally unfriendly substances;

in this transition, we have for example

implemented lead free soldering. Major

Waste Electrical and Electronic Equipment

FRIWO products already bear today all the

markings that will be required by inter-

national laws for an integrated recycling

process tomorrow.

Switchmode Power Supply

FRIWO offers an extensive range of standard devices with excel-

kinds of special requirements can be developed. In the process,

the application considerably determines the design:

Safety Regulations, Protection Classes, and Connection

Types

The EMC conformity according to EN 61000-6-X, under conside-

ration of system perturbations according to EN 61000-3-2 should

be observed for power supply units independent of the switching

When selecting the housing, the ambient conditions, for ex-

ample in moist environments, must be considered. For general

applications, the type of protection according to EN 60529-IP20

(Operation in Dry Rooms – Protection Against the Penetration

of Solid Foreign Body) suffices. According to application, power

supply units are designed in accordance with the respective appli-

Switchmode power supply units are particularly suited for fee-

form mean they can be just as advantageously combined with all

other types of applications.

An additional increase in attractiveness results from the wide-

wide standardised IEC sockets (our DT series) or as plug-in power

following pages.

First, here is some important technical information:

Primary Switched Power Supply Units

In such a power supply unit, the mains voltage is first rectified

and smoothed. After that, it is switched at high frequencies and

transferred via a converter transformer. The required low voltage

mized. The requirements for very low stand-by power consumption

(stand-by power) can only be met using this technology.

Secondary Adapter Plug System

wire diameter which is generally used in our units ranges from 0.25 mm2 to

1.5 mm2. Both flat and round cables can be used.

FRIWO has its own plug system with self-cleaning fork contacts and the

corresponding sockets for snap-in or PCB installation. This plug connection

is available in 2- or 3-pin design. Beyond the safe contact due to the self-

cleaning of the fork terminals, this system also provides the advantage of

extremely small dimensions.

The low-voltage plugs shown only represent a selection of the com-

prehensive range. Customized designs, special versions and types with

other dimensions can be obtained upon request.

Length

mm Order No. o. Ø

Lenght

mm Order No. o. Ø i. Ø

Length

mm Order No. o. Ø

Length

mm Order No.

(upon request)

Description Order No.