4/15/2019 Type 4, 4X Polyester Pushbutton Enclosure (PJPBLC Series) - Hammond Mfg.
https://www.hammfg.com/electrical/products/operator/pjpblc 1/2
Additional Inner Panels Terminal Kit Assemblies
PJ Stainless Replacement Mounting Feet Hole Plugs
Type 4, 4X Polyester Pushbutton Enclosure PJPBLC Series
Application
Designed for use as pushbutton enclosures for 30.5mm devices.
Provides outstanding insulation and protection where equipment may be hosed down or
be very wet.
Ideal in applications with high temperatures or highly corrosive environments.
Standards
UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
NEMA Type 1, 2, 3, 4, 4X, 12 and 13
IEC 60529, IP66
Construction
Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or
drilled.
Standard JIC sizes under 18" x 16".
Threaded brass inserts are provided for optional inner panel or terminal kit mounting.
Cover is fastened with captive stainless steel screws in threaded brass inserts.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
Stainless steel mounting brackets and hardware are provided for mounting to the rear of
the enclosure.
Enhanced UV inhibitors protect against outdoor weathering.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in Technical Information.
Finish
Fiberglass polyester material has a gray finish.
Optional inner panels are available in white powder coated finished steel or unfinished
aluminum.
Accessories
Quality Products. Service Excellence.
4/15/2019 Type 4, 4X Polyester Pushbutton Enclosure (PJPBLC Series) - Hammond Mfg.
https://www.hammfg.com/electrical/products/operator/pjpblc 2/2
Data subject to change without notice
Lift Off Cover Hinged Cover No. Enclosure Optional Inner Panel
30.5mm PB Part No. 30.5mm PB Part No. Holes H W D Part No. H W
PJ664P4 PJ664HP4 4 6.10 6.10 4.18 14R0505 4.88 4.88
PJ864P6 PJ864HP6 6 8.00 6.12 4.13 14R0705 6.75 4.88
PJ1084P9 PJ1084HP9 9 10.13 8.26 4.13 14R0907 8.75 6.88
PJ1086P9 PJ1086HP9 9 10.13 8.26 6.13 14R0907 8.75 6.88
PJ1086P12 PJ1086HP12 12 10.13 8.26 6.13 14R0907 8.75 6.88
PJ12106P16 PJ12106HP16 16 12.13 10.26 6.13 14R1109 10.75 8.88
PJ12106P20 PJ12106HP20 20 12.13 10.26 6.13 14R1109 10.75 8.88
PJ14126P25 PJ14126HP25 25 14.13 12.26 6.13 14R1311 12.75 10.88
PJ16148P30 PJ16148HP30 30 16.27 14.40 8.13 14R1513 14.75 12.88
PJ18168P42 PJ18168HP42 42 18.40 16.40 8.13 P1868 16.88 14.88
Alternative inner panel options available.
© 2019. Hammond Manufacturing Ltd. All rights reserved.
