SPECIFICATION CONTROL DRAWING Product Name Marking* SGRT-2-03 2-3/6 SGRT-2-04 2-4/8 SGRT-2-05 2-5/10 SGRT-2-06 2-6/14 SGRT-2-08 2-8/516 SGRT-3-06 3-6/14 3.90.3 (0.1550.012) SGRT-3-08 3-8/516 SGRT-4-06 4-6/14 SGRT-4-08 oA 4-8/516 5.60.5 (0.2200.020) 8.20.5 (0.3250.020) Product Dimensions oB oC L3.5 Nom Nom (L0.140) 3.8 (0.150) 4.3 (0.170) 5.5 (0.216) 6.5 (0.255) 8.4 (0.330) 6.5 (0.255) 8.4 (0.330) 6.5 (0.255) 8.4 (0.330) 7.3 (0.285) 8.0 (0.315) 10.0 (0.394) 11.0 (0.435) 14.0 (0.550) 11.0 (0.435) 14.0 (0.550) 11.0 (0.435) 14.0 (0.550) 37.0 (1.455) 37.0 (1.455) 39.0 (1.535) 40.5 (1.595) 45.0 (1.772) 47.2 (1.860) 51.7 (2.035) 47.4 (1.865) 50.9 (2.005) Conductor Cross Section Bundle oD max E Max. Min. mm2 (CMA) Max. mm2 (CMA) 12.8 1.2 (2400) 3.0 (6000) 5.0 (0.195) 15A 14.0 2.5 (5000) 6.6 (132000) 6.5 (0.255) 33A 16.0 6.0 (12000) 11.2 (22400) 9.0 (0.355) 56A Current Rating * Marking color: black. See marking code below. MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Sn60 per ANSI/J-STD-006. FLUX: TYPE ROM1 per ANSI/J-STD-004. 3. OPEN CONICAL COIL: Tin-plated copper alloy. 4. RING TERMINAL: Tin-plated copper alloy. APPLICATION 1. These controlled soldering devices are designed to terminate tin-plated copper stranded wires having an insulation rated for 85C minimum, to a ring terminal. Marking Code: 2. Temperature range: -55C to +150C. X - X / XXX 3. Parts conform to the performance requirements of SAE-AS 7928 Specification. 4. See RPIP-820-01 for installation procedure. Stud Size in inches. For best results, prepare the cable as shown: 6 = #6 8 = #8 10 = #10 14 = 1/4 516 = 5/16 Stud Size in mm. Product Size: 2 to 4 = Tyco Electronics Corporation 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. TITLE: Raychem Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A DRAWN BY: ANGLES: N/A ROUGHNESS IN MICRON CAGE CODE: Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. REPLACES: DCR NUMBER: P.TALLY 06090 D040166 D060372 (c) 2006 Tyco Electronics Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision SOLDERGRIP RING TERMINAL DOCUMENT NO.: SGRT-X-XX REV.: DATE: A SCALE: 13-Nov-06 SIZE: NTS SHEET: A 1 of 1