VJ1825A222FBBAT4X - Vishay Presicion Group

Document Number: 45047 For technical questions, contact: mlcc@vishay.com www.vishay.com

Revision: 26-Feb-10 1

Surface Mount Multilayer Ceramic Chip Capacitor Solutions

for Boardflex Sensitive Applications

VJ OMD - C0G (NP0)

Vishay Vitramon

FEATURES

•Open Mode Design reduces risk of shorts or

leakage in board flex applications.

•Surface mount, wet build process

•Reliable Noble Metal Electrode (NME) system

•High frequency filtering for switching power supplies

•100 % voltage conditioning available up to 630 VDC rating

(process code “5H”)

Contact mlcc@vishay.com for higher voltages.

•Polymer termination available for intensive board flex

requirements

•Halogen-free according to IEC 61249-2-21 definition

APPLICATIONS

•Demanding boardflex applications

•Input filter capacitors

•Output filter capacitors

•Snubber capacitors reduce MOSFET voltage spikes

•High frequency filtering for switching power supplies

•Lighting and AC power applications contact:

mlcc@vishay.com

ELECTRICAL SPECIFICATIONS

Note

Electrical characteristics at + 25 °C unless otherwise stated.

Operating Temperature: - 55 °C to + 125 °C

Capacitance Range: 10 pF to 47 nF

Voltage Range: 50 VDC to 3000 VDC

Temperature Coefficient of Capacitance (TCC):

0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C

Dissipation Factor:

0.1 % max. at 1.0 VRMS and 1 MHz for values ≤ 1000 pF

0.1 % max. at 1.0 VRMSand 1 kHz for values > 1000 pF

Aging Rate: 0 % maximum per decade

Insulation Resistance (IR):

At + 25 °C and rated voltage 100 000 MΩ minimum or

1000 ΩF, whichever is less

At + 125 °C and rated voltage 10 000 MΩ minimum or

100 ΩF, whichever is less

Dielectric Strength Test:

Performed per Method 103 of EIA 198-2-E.

Applied test voltages:

≤ 500 VDC-rated: 200 % of rated voltage

630 VDC/1000 VDC-rated: 150 % of rated voltage

1500 VDC to 3000 VDC-rated: 120 % of rated voltage

VJ OMD - C0G (NP0)

Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitor Solutions

for Boardflex Sensitive Applications

www.vishay.com For technical questions, contact: mlcc@vishay.com Document Number: 45047

2Revision: 26-Feb-10

Notes

(1) DC voltage rating should not be exceeded in application

(2) Process code with 2 digits has to be added

•Lighting and AC power applications please contact: mlcc@vishay.com

• Polymer (B-termination) have increased dimensions:

1206 and smaller case sizes: Length 0.002" (0.05 mm)

1210 and larger case sizes: Length 0.004" (0.10 mm)

DIMENSIONS in inches [millimeters]

PART

ORDERING

NUMBER

LENGTH (L) WIDTH (W)

MAXIMUM

THICKNESS

(T)

TERMINATION PAD (P)

MINIMUM MAXIMUM

VJ1206 0.126 ± 0.008

[3.20 ± 0.20]

0.063 ± 0.008

[1.60 ± 0.20] 0.067 [1.70] 0.010 [0.25] 0.028 [0.71]

VJ1210 0.126 ± 0.008

[3.20 ± 0.20]

0.098 ± 0.008

[2.50 ± 0.20] 0.067 [1.70] 0.010 [0.25] 0.028 [0.71]

VJ1808 0.180 ± 0.010

[4.57 ± 0.25]

0.080 ± 0.010

[2.03 ± 0.25] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76]

VJ1812 0.177 ± 0.010

[4.50 ± 0.25]

0.126 ± 0.008

[3.20 ± 0.20] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76]

VJ1825 0.177 ± 0.010

[4.50 ± 0.25]

0.252 ± 0.010

[6.40 ± 0.25] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76]

VJ2220 0.220 ± 0.008

[5.59 ± 0.20]

0.200 ± 0.008

[5.08 ± 0.20] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76]

VJ2225 0.220 ± 0.010

[5.59 ± 0.25]

0.250 ± 0.010

[6.35 ± 0.25] 0.086 [2.18] 0.010 [0.25] 0.030 [0.76]

MAX.

ORDERING INFORMATION

VJ1206 A 101 J X B A T ## (2)

CASE

SIZE

DIELECTRIC CAPACITANCE

CODE

CAPACITANCE

TOLERANCE

TERMINATION DC VOLTAGE

RATING (1)

MARKING PACKAGING PROCESS

CODE

1206

1210

1808

1812

1825

2220

2225

A = C0G

(NP0)

Expressed in

picofarads (pF).

The first two

digits are

significant, the

third is a

multiplier.

Example:

101 = 100 pF

F = ± 1 %

G = ± 2 %

H = ± 3 %

J = ± 5 %

K = ± 10 %

M = ± 20 %

X = Ni barrier

100 % Tin plate

matte finish

F = AgPd

B = Polymer

100 Tin plate

matte finish

N =

Non-magnetic

A = 50 V

B = 100 V

C = 200 V

E = 500 V

L = 630 V

G = 1000 V

R = 1500 V

F = 2000 V

H = 3000 V

A =

Unmarked

T = 7"

reel/plastic tape

R = 11 1/4"/13"

reel/plastic tape

4X =

OMD Cap

5H =

OMD Cap

100 % Voltage

condition

Document Number: 45047 For technical questions, contact: mlcc@vishay.com www.vishay.com

Revision: 26-Feb-10 3

VJ OMD - C0G (NP0)

Surface Mount Multilayer Ceramic Chip Capacitor Solutions

for Boardflex Sensitive Applications Vishay Vitramon

Note

(1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034

SELECTION CHART

DIELECTRIC C0G (NP0)

STYLE VJ1206 (1) VJ1210 (1) VJ1808 (1)

EIA TYPE 1206 1210 1808

VOLTAG E (VDC)

50 100 200 500 630 1000 1500 50 100 200 500 630 1000 1500 2000 50 100 200 500 630 1000 1500 2000 3000

CAP.

CODE CAP.

100 10 pF ••••••••••••• • ••••••••••

120 12 pF ••••••••••••• • ••••••••••

150 15 pF ••••••••••••• • ••••••••••

180 18 pF ••••••••••••• • ••••••••••

220 22 pF ••••••••••••• • ••••••••••

270 27 pF ••••••••••••• • ••••••••••

330 33 pF ••••••••••••• • ••••••••••

390 39 pF ••••••••••••• • •••••••••

470 47 pF ••••••••••••• • •••••••••

560 56 pF ••••••••••••• • •••••••••

680 68 pF ••••••••••••• • •••••••••

820 82 pF ••••••••••••• • •••••••••

101 100 pF ••••••••••••• • •••••••••

121 120 pF ••••••••••••• • ••••••••

151 150 pF ••••• •••• ••••••••

181 180 pF ••••• •••• ••••••••

221 220 pF ••••• •••• ••••••••

271 270 pF ••••• •••• ••••••

331 330 pF ••••• •••• ••••••

391 390 pF ••••• •••• ••••••

471 470 pF ••••• •••• ••••••

561 560 pF ••••• •••• ••••••

681 680 pF ••••• •••• ••••••

821 820 pF ••••• •••• ••••••

102 1000 pF ••••• •••• ••••••

122 1200 pF ••• •••• ••••

152 1500 pF ••• ••• ••••

182 1800 pF ••• ••• •••

222 2200 pF ••• ••• •••

272 2700 pF •• ••• •••

332 3300 pF •• ••• •••

392 3900 pF • ••• •••

472 4700 pF • ••• •••

562 5600 pF • •••

682 6800 pF •••

822 8200 pF ••

103 0.010 µF

123 0.012 µF

153 0.015 µF

183 0.018 µF

223 0.022 µF

273 0.027 µF

333 0.033 µF

393 0.039 µF

473 0.047 µF

563 0.056 µF

683 0.068 µF

823 0.082 µF

104 0.1 µF

VJ OMD - C0G (NP0)

Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitor Solutions

for Boardflex Sensitive Applications

www.vishay.com For technical questions, contact: mlcc@vishay.com Document Number: 45047

4Revision: 26-Feb-10

Note

(1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034

OMD - C0G (NP0) CAPACITANCE RANGE

DIELECTRIC C0G (NP0)

STYLE VJ1812 (1) VJ1825 (1) VJ2220 (1) VJ2225 (1)

EIA TYPE 1812 1825 2220 2225

VOLTAGE

(VDC)

50 100 200 500 630 1000 1500 2000 3000 50 100 200 500 630 1000 50 100 200 500 630 1000 50 100 200 500 630 1000

CAP.

CODE CAP.

100 10 pF •••••••••

120 12 pF •••••••••

150 15 pF ••••••••• ••

180 18 pF ••••••••• ••

220 22 pF ••••••••• ••

270 27 pF ••••••••• ••

330 33 pF •••••••••••••••

390 39 pF •••••••••••••••

470 47 pF •••••••••••••••

560 56 pF •••••••••••••••

680 68 pF •••••••••••••••

820 82 pF •••••••••••••••

101 100 pF •••••••••••••••

121 120 pF •••••••••••••••

151 150 pF •••••••••••••••

181 180 pF •••••••••••••••

221 220 pF •••••••••••••••

271 270 pF •••••••••••••••••••••••••••

331 330 pF •••••••••••••••••••••••••••

391 390 pF •••••••• ••••••••••••••••••

471 470 pF •••••••• ••••••••••••••••••

561 560 pF •••••••• ••••••••••••••••••

681 680 pF •••••••• ••••••••••••••••••

821 820 pF •••••• ••••••••••••••••••

102 1000 pF •••••• ••••••••••••••••••

122 1200 pF •••••• ••••••••••••••••••

152 1500 pF •••••• ••••••••••••••••••

182 1800 pF •••••• ••••••••••••••••••

222 2200 pF •••••• ••••••••••••••••••

272 2700 pF •••• •••• ••••••••••••

332 3300 pF •••• •••• ••••••••••••

392 3900 pF •••• •••• ••••••••••••

472 4700 pF ••• •••• ••••••••••••

562 5600 pF ••• •••• ••• ••••

682 6800 pF ••• •••• ••• ••••

822 8200 pF ••• •••• ••• ••••

103 0.010 µF ••• ••• ••• ••••

123 0.012 µF •• ••• ••• ••••

153 0.015 µF • ••• •• •••

183 0.018 µF • ••• •• •••

223 0.022 µF ••• •• •••

273 0.027 µF •• •• •••

333 0.033 µF •••••

393 0.039 µF •••

473 0.047 µF •

563 0.056 µF

683 0.068 µF

823 0.082 µF

104 0.1 µF

Document Number: 45047 For technical questions, contact: mlcc@vishay.com www.vishay.com

Revision: 26-Feb-10 5

VJ OMD - C0G (NP0)

Surface Mount Multilayer Ceramic Chip Capacitor Solutions

for Boardflex Sensitive Applications Vishay Vitramon

OMD - C0G (NP0) CAPACITORS - TYPICAL PARAMETERS

- 75 - 50 - 25 0 25 50 75 100 125

2.0

1.5

1.0

0.5

0.0

- 0.5

- 1.0

- 1.5

- 2.0

TEMPERATURE COEFFICIENT OF CAPACITANCE

NP0

TEMPERATURE °C

% CAPACITANCE CHANGE

AGING RATE

HOURS

1 10 100 1000 10 000

0.2

0.1

0.0

- 0.1

- 0.2

% CAPACITANCE CHANGE

TEMPERATURE °C

10 25 100 125

10 000

1000

100

INSULATION RESISTANCE

(ΩF)

MIN. INSULATION RESISTANCE VS. TEMPERATURE

0 100 200 300 400 500 600 700 800 900 1000

- 20

- 30

VOLTAGE COEFFICIENT OF CAPACITANCE

DC VOLTS APPLIED

% CAPACITANCE CHANGE

- 10

VJ OMD - C0G (NP0)

Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitor Solutions

for Boardflex Sensitive Applications

www.vishay.com For technical questions, contact: mlcc@vishay.com Document Number: 45047

6Revision: 26-Feb-10

BOARDFLEX SENSITIVE APPLICATIONS - SOLUTION:

A predominant failure mode in multilayer ceramic chip capacitors is cracking caused by board flexure. Cracks can then create a

path for current to pass from one electrode through the dielectric to an opposing electrode or from the terminations at one end of

the MLCC through the dielectric to an opposing electrode. This may subsequently result in capacitance loss, leakage - low

Insulation Resistance (IR) - and/or more seriously, high current shorts. A short circuit condition in the surface mounted capacitors

can cause further failures of downstream components. Vishay’s Open Mode Design Capacitors (VJ OMD - Cap series) reduce

the risk of these destructive conditions through MLCC designs that prevent board flexure cracks reaching the opposing electrode.

VJ OMD - Cap MLCCs reduce the risk of early field failures associated with board flex cracks. However, it is important to note

that even in the open mode designs the presence of flexure related cracks can cause capacitance loss leading to localized

stresses on the parts. eventually, depending on the application environment, including such factors and high voltage pulse

frequency and thermal cycling this may lead to internal breakdown of the component.

POLYMER TERMINATION

Polymer termination provides additional protection against board flexure damage by absorbing greater mechanical and thermal

stresses. Components can be packaged, transported, stored and handled the same standard terminated product. Wave and

reflow soldering of MLCC does not require modification to equipment and/or process. Polymer termination greatly reduces the

risk of mechanical cracking however it does not completely eliminate.

STANDARD TERMINATION OMD CAP PLUS POLYMER TERMINATION

Exposed Electrodes = Electrical short No Exposed Electrodes = No Electrical short

BEND TEST RESULTS 2220 CASE SIZE

0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0

Log. (Polymer Termination)

Polymer Termination

Log. (Standard Termination)

Standard Termination

BOARD FLEXURE in (mm)

FAILED PERCENTAGE OF PARTS

0 %

10 %

20 %

30 %

40 %

50 %

60 %

70 %

80 %

90 %

100 %

Document Number: 45047 For technical questions, contact: mlcc@vishay.com www.vishay.com

Revision: 26-Feb-10 7

VJ OMD - C0G (NP0)

Surface Mount Multilayer Ceramic Chip Capacitor Solutions

for Boardflex Sensitive Applications Vishay Vitramon

Notes

(1) Vishay Vitramon uses embossed plastic carrier tape

(2) REFERENCE: EIA Standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”

(3) N/a = Not available

(4) Lower quantities can depend form product thickness

STANDARD PACKAGING QUANTITIES (1)(2)(3)

7" REEL

QUANTITIES

11 1/4" AND 13" REEL

QUANTITIES

BODY SIZE TAPE SIZE

PAPER TAPE

PACKAGING CODE

“C”

PLASTIC TAPE

PACKAGING CODE

“T”

PAPER TAPE

PACKAGING CODE

“P”

PLASTIC TAPE

PACKAGING CODE

“R”

1206 (4) 8 mm N/a 3000/2500 N/a 10 000/9000

1210 (4) 8 mm N/a 3000/2500/2000 N/a 10 000/9000

1808 (4) 12 mm N/a 2000 N/a 10 000

1812 (4) 12 mm N/a 1000 N/a 4000

1825 12 mm N/a 1000 N/a 4000

2220 12 mm N/a 1000 N/a 4000

2225 12 mm N/a 1000 N/a 4000

Document Number: 91000 www.vishay.com

Revision: 18-Jul-08 1

Disclaimer

Legal Disclaimer Notice

Vishay

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.