SN54AC00-SP www.ti.com ............................................................................................................................................................................................. SCHS367 - OCTOBER 2008 RAD-TOLERANT CLASS V, QUADRUPLE 2-INPUT POSITIVE-NAND GATE FEATURES 1 * * * * * (1) 2-V to 6-V VCC Operation Inputs Accept Voltages to 6 V Max tpd of 7 ns at 5 V Rad-Tolerant: 50 KRad(Si) TID (1) - TID Dose Rate < 2 mRad/sec QML-V Qualified, SMD 5962-87549 Radiation tolerance is a typical value based upon initial device qualification. Radiation Lot Acceptance Testing is available - contact factory for details. J OR W PACKAGE (TOP VIEW) 1A 1B 1Y 2A 2B 2Y GND 1 14 2 13 3 12 4 11 5 10 6 9 7 8 VCC 4B 4A 4Y 3B 3A 3Y DESCRIPTION/ORDERING INFORMATION The SN54AC00 device contains four independent 2-input NAND gates. Each gate performs the Boolean function of Y = A * B or Y = A + B in positive logic. ORDERING INFORMATION TA -55C to 125C (1) (2) PACKAGE (1) (2) ORDERABLE PART NUMBER TOP-SIDE MARKING CDIP - J Tube 5962-8754903VCA 5962-8754903VCA CFP - W Tube 5962-8754903VDA 5962-8754903VDA Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at www.ti.com. FUNCTION TABLE (Each Gate) INPUTS OUTPUT Y A B H H L L X H X L H LOGIC DIAGRAM (POSITIVE LOGIC) A Y B 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2008, Texas Instruments Incorporated On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. SN54AC00-SP SCHS367 - OCTOBER 2008 ............................................................................................................................................................................................. www.ti.com ABSOLUTE MAXIMUM RATINGS (1) over operating free-air temperature range (unless otherwise noted) MIN MAX VCC Supply voltage range -0.5 7 V VI Input voltage range (2) -0.5 VCC + 0.5 V -0.5 VCC + 0.5 (2) UNIT VO Output voltage range IIK Input clamp current VI < 0 or VI > VCC 20 mA IOK Output clamp current VO < 0 or VO > VCC 20 mA IO Continuous output current VO = 0 to VCC 50 mA 200 mA Continuous current through VCC or GND JA Package thermal impedance (3) Tstg Storage temperature range (1) (2) (3) J package V C/W W package -65 150 C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. The package thermal impedance is calculated in accordance with JESD 51-7. RECOMMENDED OPERATING CONDITIONS VCC Supply voltage VCC = 3 V VIH High-level input voltage MIN MAX 2 6 UNIT V 2.1 VCC = 4.5 V 3.15 VCC = 5.5 V 3.85 VCC = 3 V V 0.9 VIL Low-level input voltage VCC = 4.5 V 1.35 VI Input voltage 0 VCC V VO Output voltage 0 VCC V IOH High-level output current VCC = 5.5 V IOL Low-level output current t/v Input transition rise or fall rate TA Operating free-air temperature 2 1.65 VCC = 3 V 12 VCC = 4.5 V 24 VCC = 5.5 V 24 VCC = 3 V 12 VCC = 4.5 V 24 VCC = 5.5 V 24 8 -55 Submit Documentation Feedback V 125 mA mA ns/V C Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): SN54AC00-SP SN54AC00-SP www.ti.com ............................................................................................................................................................................................. SCHS367 - OCTOBER 2008 ELECTRICAL CHARACTERISTICS over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS IOH = -50 A VOH IOH = -12 mA IOH = -24 mA VOL TA = 25C MIN TYP MIN MAX 3V 2.9 2.9 4.5 V 4.4 4.4 5.5 V 5.4 5.4 3V 2.56 2.4 4.5 V 3.86 3.7 5.5 V 4.86 MAX 4.7 5.5 V 3V 0.1 0.1 IOL = 50 A 4.5 V 0.1 0.1 5.5 V 0.1 0.1 3V 0.36 0.5 4.5 V 0.36 0.5 5.5 V 0.36 IOL = 12 mA IOL = 50 mA (1) 5.5 V UNIT V IOH = -50 mA (1) IOL = 24 mA 3.85 V 0.5 1.65 VI = VCC or GND 5.5 V 0.1 1 A ICC VI = VCC or GND, IO = 0 5.5 V 4 40 A Ci VI = VCC or GND II (1) VCC 5V 2.6 pF Not more than one output should be tested at a time, and the duration of the test should not exceed 2 ms. SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 3.3 V 0.3 V (unless otherwise noted) (see Figure 1) PARAMETER tPLH tPHL FROM (INPUT) TO (OUTPUT) A or B Y TA = 25C MIN MIN MAX 9.5 1 11 8 1 9 TYP MAX 2 7 1.5 5.5 UNIT ns SWITCHING CHARACTERISTICS over recommended operating free-air temperature range, VCC = 5 V 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER tPLH tPHL FROM (INPUT) TO (OUTPUT) A or B Y TA = 25C MIN MAX 8 1 8.5 6.5 1 7 MIN TYP MAX 1.5 6 1.5 4.5 UNIT ns OPERATING CHARACTERISTICS VCC = 5 V, TA = 25C PARAMETER Cpd Power dissipation capacitance TEST CONDITIONS CL = 50 pF, f = 1 MHz TYP 40 Submit Documentation Feedback Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): SN54AC00-SP UNIT pF 3 SN54AC00-SP SCHS367 - OCTOBER 2008 ............................................................................................................................................................................................. www.ti.com PARAMETER MEASUREMENT INFORMATION TEST S1 tPLH/tPHL Open From Output Under Test CL = 50 pF (see Note A) S1 Open 50% VCC 50% VCC 0V tPLH 2 x VCC 500 VCC Input (see Note B) tPHL In-Phase Output 50% VCC tPHL 500 tPLH Out-of-Phase Output LOAD CIRCUIT VOH 50% VCC VOL 50% VCC VOH 50% VCC VOL VOLTAGE WAVEFORMS NOTES: A. CL includes probe and jig capacitance. B. All input pulses are supplied by generators having the following characteristics: PRR 1 MHz, ZO = 50 , tr 2.5 ns, tf 2.5 ns. C. The outputs are measured one at a time with one input transition per measurement. Figure 1. Load Circuit and Voltage Waveforms 4 Submit Documentation Feedback Copyright (c) 2008, Texas Instruments Incorporated Product Folder Link(s): SN54AC00-SP IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee(R) Solutions amplifier.ti.com dataconverter.ti.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf Applications Audio Automotive Broadband Digital Control Medical Military Optical Networking Security Telephony Video & Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/medical www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2008, Texas Instruments Incorporated