1-phase filters
FN 610
General purpose EMI filter
Approvalsn Rated currents from 1 to 30A
n Good overall differential and common-
mode attenuation
n Optional medical versions (B type)
n Optional safety versions (A type)
Typical applications
n FN 610 filters are designed for easy and
fast chassis mounting.
n FN 610 filters offer a perfect combination
of performance/size ratio.
n All filters provide a good symmetrical and
asymmetrical attenuation performance,
based on chokes with high saturation
resistance and excellent thermal behavior.
n General purpose filter attenuation perform-
ance suitable to be used in a broad range
of applications.
n Multiple terminal connections like faston
with additional spade solder possibility,
wire connection and screw connection.
n Optional safety (A type) or medical (B type)
versions with low leakage current.
n FN 610 filters are also available as two-
stage filters (FN 660, FN 670 series).
n Custom-specific versions on request.
n Electrical and electronical equipment
n Consumer goods
n Household equipment
n Medical equipment
n Office automation equipment
n Datacom equipment
Features and benefits
Technical specifications
Maximum continuous operating voltage: 250VAC, 50/60Hz
Operating frequency: dc to 400Hz
Rated currents: 1 to 30A @ 40°C max.
High potential test voltage: P –> E 2000VAC for 2 sec
P –> E 2500VAC for 2 sec (B types)
P –> N 760VAC for 2 sec
Temperature range (operation and storage): -25°C to +100°C (25/100/21)
Flammability corresponding to: UL 94V-2 or better
Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
MTBF @ 40°C/230V (Mil-HB-217F): 1,200,000 hours
Typical electrical schematic
P
E
N
Line
CxR L Cy
P‘
N‘
Load