NC7SZ332 TinyLogic UHS 3-Input OR Gate Description T h e N C 7 S Z 3 3 2 i s a s i n g l e 3 -I n p u t O R G a t e f r o m ON Semiconductor's Ultra High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65 V to 5.5 V VCC range. The inputs and output are high impedance when VCC is 0 V. Inputs tolerate voltages up to 5.5 V independent of VCC operating voltage. www.onsemi.com MARKING DIAGRAMS SIP6 1.45x1.0 CASE 127EB Features * * * * * * * * * Space Saving SC70 6-Lead Package Ultra-Small MicroPakTM Leadless Package Ultra High Speed: tPD 2.4 ns Typ into 50 pF at 5 V VCC High Output Drive 24 mA at 3 V VCC Broad VCC Operating Range 1.65 V to 5.5 V Power Down High Impedance Inputs / Output Overvoltage Tolerant Inputs Facilitate 5 V to 3 V Translation Patented Noise / EMI Reduction Circuitry Implemented These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant IEEC / IEC A B & C SC-88 (SC-70 6 Lead) 1.25x2 CASE 419AD-01 F3, 332 KK XY Z 332T = Specific Device Code = 2-Digit Lot Run Traceability Code = 2-Digit Date Code Format = Assembly Plant Code = Year Coding Scheme = Plant Code Identifier = Die Run Code = Eight-Week Datacoding Scheme ORDERING INFORMATION See detailed ordering, marking and shipping information in the package dimensions section on page 5 of this data sheet. Figure 1. Logic Symbol (c) Semiconductor Components Industries, LLC, 2004 June, 2019 - Rev. 1 Pin 1 T Y F3KK XYZ 1 Publication Order Number: NC7SZ332/D NC7SZ332 Connection Diagrams A 1 6 C GND 2 5 VCC B 3 4 Y A 1 GND 2 5 VCC B 3 4 Y Figure 4. MicroPak (Top Through View) Figure 2. SC70 (Top View) (Top View) 6 C AAA Pin One AAA represents Product Code Top Mark - see ordering code NOTE: Orientation of Top Mark determines Pin One location. Read the Top Product Code Mark left to right, Pin One is the lower left pin (see diagram). Figure 3. Pin 1 Orientation PIN DESCRIPTIONS FUNCTION TABLE (Y = A + B + C) Pin Name Description Output Input A, B, C Inputs A B C Y Y Output H X X H X H X H X X H H L L L L H = HIGH Logic Level L = LOW Logic Level X = Either LOW or HIGH Logic Level www.onsemi.com 2 NC7SZ332 ABSOLUTE MAXIMUM RATINGS Symbol Min Max Unit VCC Supply Voltage -0.5 6.5 V VIN DC Input Voltage -0.5 6.5 V DC Output Voltage -0.5 6.5 V @ VIN < -0.5 V - -50 mA @ VIN > 6 V - +20 mA @ VOUT < -0.5 V - -50 mA @ VOUT > 6 V, (VCC = GND) - +20 DC Output Current - 50 mA DC VCC / GND Current - 50 mA -65 +150 C - 150 C VOUT IIK IOK IOUT ICC / IGND TSTG Parameter DC Input Diode Current DC Output Diode Current Storage Temperature TJ Junction Temperature under Bias TL Junction Lead Temperature (Soldering, 10 Seconds) - 260 C PD Power Dissipation @ +85C SC70-5 - 190 mW MicroPak - 327 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. RECOMMENDED OPERATING CONDITIONS Symbol VCC VIN VOUT Parameter Min Max Unit Supply Voltage Operating 1.65 5.5 V Supply Voltage Data Retention 1.5 5.5 Input Voltage 0 5.5 V Output Voltage 0 VCC V TA Operating Temperature tr, tf Input Rise and Fall Times qJA Thermal Resistance Conditions -40 +85 C VCC at 1.8 V, 2.5 V 0.2 V 0 20 ns/V VCC at 3.3 V 0.3 V 0 10 VCC at 5.0 V 0.5 V 0 5 SC70-5 - 659 MicroPak - 382 C/W Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. 1. Unused inputs must be held HIGH or LOW. They may not float. www.onsemi.com 3 NC7SZ332 DC ELECTICAL CHARACTERISTICS TA = +25C Symbol VIH VIL VOH VOL Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage Typ Max Min Max Unit 1.8 0.15 0.65 VCC - - 0.65 VCC - V 2.3 to 5.5 0.70 VCC - - 0.70 VCC - 1.8 0.15 - - 0.35 VCC - 0.35 VCC 2.3 to 5.5 - - 0.30 VCC - 0.30 VCC VCC (V) 1.65 Conditions VIN = VIH 1.55 1.65 - 1.55 - 2.3 IOH = -100 mA 2.2 2.3 - 2.2 - 3.0 2.9 3.0 - 2.9 - 4.5 4.4 4.5 - 4.4 - 1.65 IOH = -4 mA 1.29 1.52 - 1.29 - 2.3 IOH = -8 mA 1.9 2.15 - 1.9 - 3.0 IOH = -16 mA 2.4 2.80 - 2.4 - 3.0 IOH = -24 mA 2.3 2.68 - 2.3 - 4.5 IOH = -32 mA 3.8 4.20 - 3.8 - IOL = 100 mA - 0.0 0.1 - 0.1 2.3 - 0.0 0.1 - 0.1 3.0 - 0.0 0.1 - 0.1 1.65 VIN = VIL 4.5 IIN Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current TA = -40 to +85C Min V V V - 0.0 0.1 - 0.1 1.65 IOL = 4 mA - 0.08 0.24 - 0.24 2.3 IOL = 8 mA - 0.10 0.3 - 0.3 3.0 IOL = 16 mA - 0.15 0.4 - 0.4 3.0 IOL = 24 mA - 0.22 0.55 - 0.55 4.5 IOL = 32 mA - 0.22 0.55 - 0.55 VIN = 5.5 V, GND - - 1 - 10 mA VIN or VOUT = 5.5 V - - 1 - 10 mA VIN = 5.5 V, GND - - 2.0 - 20 mA 1.65 to 5.5 0 1.65 to 5.5 www.onsemi.com 4 NC7SZ332 AC ELECTRICAL CHARACTERISTICS TA = 25C Symbol tPLH, tPHL Parameter Propagation Delay (Figure 5, 7) Conditions Min Typ Max Min Max Unit 1.80 0.15 CL = 15 pF, RL = 1 MW - 6.5 18.5 - 19.0 ns - 3.0 11.0 - 11.5 3.30 0.3 - 2.4 7.5 - 8.0 5.00 0.5 - 1.9 5.5 - 6.0 - 3.0 8.5 - 9.0 - 2.4 7.0 - 7.5 - 4 - - - pF - 20 - - - pF - 26 - - - 2.50 0.2 3.30 0.3 5.00 0.5 CIN Input Capacitance CPD Power Dissipation Capacitance (Figure 6) TA = -40 to +85C VCC (V) CL = 50 pF, RL = 500 W 0 3.3 (Note 2) 5.0 2. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle.(See Figure 6) CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD) (VCC) (fIN) + (ICCstatic). AC Loading and Waveforms VCC tf = 3 ns VCC tr = 3 ns 90% INPUT CL 50% INPUT OUTPUT 10% RL 90% 50% tW tPLH CL includes load and stray capacitance Input PRR = 1.0 MHz, tW = 500 ns. GND tPHL 50% OUTPUT 10% VOH 50% Figure 5. AC Test Circuit VOL Figure 7. AC Waveforms VCC A INPUT Input = AC Waveform; tr = tf = 1.8 ns; PRR = 10 MHz; Duty Cycle = 50%. Figure 6. ICCD Test Circuit DEVICE ORDERING INFORMATION Top Mark Packages Shipping NC7SZ332P6X 332 6-Lead SC70, EIAJ SC88, 1.25 mm Wide 3000 / Tape & Reel NC7SZ332L6X F3 6-Lead MicroPak, 1.00 mm Wide 5000 / Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. MicroPak is trademark of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. www.onsemi.com 5 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SIP6 1.45X1.0 CASE 127EB ISSUE O DOCUMENT NUMBER: DESCRIPTION: 98AON13590G SIP6 1.45X1.0 DATE 31 AUG 2016 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped "CONTROLLED COPY" in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. (c) Semiconductor Components Industries, LLC, 2019 www.onsemi.com MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SC-88 (SC-70 6 Lead), 1.25x2 CASE 419AD-01 ISSUE A SYMBOL D e e E1 E DATE 07 JUL 2010 MIN MAX A 0.80 1.10 A1 0.00 0.10 A2 0.80 1.00 b 0.15 0.30 c 0.10 0.18 D 1.80 2.00 2.20 E 1.80 2.10 2.40 E1 1.15 1.25 1.35 0.65 BSC e L TOP VIEW NOM 0.26 0.36 L1 0.42 REF L2 0.15 BSC 0.46 0 8 1 4 10 q1 A2 A q b q1 L L1 A1 SIDE VIEW c L2 END VIEW Notes: (1) All dimensions are in millimeters. Angles in degrees. (2) Complies with JEDEC MO-203. DOCUMENT NUMBER: DESCRIPTION: 98AON34266E Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped "CONTROLLED COPY" in red. SC-88 (SC-70 6 LEAD), 1.25X2 PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. (c) Semiconductor Components Industries, LLC, 2019 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800-282-9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative