SF2073B - RF Monolithics - Datasheet.Directory

®

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 1 of 9

RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com

Notes:

1. Unless noted otherwise, all specifications apply over the operating temperature range.

2. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance

matching design. See Application Note No. 42 for details.

3. The design, manufacturing process, and specifications of this filter are subject to change.

4. Tape and Reel Standard ANSI / EIA 481.

5. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that

the filter must always be installed in one direction per the circuit design.

6. US and international patents may apply.

7. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.

9. Electrostatic Sensitive Device. Observe precautions for handling.

Electrical Characteristics

Characteristic Sym Notes Min Typ Max Units

Nominal Frequency fN1456.000 MHz

Minimum Insertion Attenuation αmin 112.5 14.5 dB

Amplitude Variation fN ±5.0 MHz ∆α 10.6 1.5 dB p-p

fN ±5.2 MHz 10.8 2.5

Absolute Group Delay (at fN)10.5 0.7 µs

Group Delay Variation (p-p) fN ±5.0 MHz 1 35 100 ns

Relative Attenuation 256 to 360 MHz 1, 2 35 50

dB

360 to 416.0 MHz 1, 2 38 64

416 to 443 MHz 1, 2 35 40

468 to 656 MHz 1, 2 35 40

656 to 946 MHz 1, 2 50 60

Temperature Range Operating -40 85 °C

Storage -40 85

Case Style SMP-03 7 x 5 mm Nominal Footprint

Lid Symbolization (YY=year, WW=week, S=shift) RFM SF2073B YYWWS

SMP-03

•Designed for 802.16 and WIMAX Receiver IF Application

•Low Insertion Loss

•5.0 X 7.0 mm Surface-Mount Case

•Differential or Single Ended Input and Output

•Complies with Directive 2002/95/EC (RoHS)

Absolute Maximum Ratings

Rating Value Units

Maximum Incident Power in Passband +13 dBm

Max. DC voltage between any 2 terminals 30 VDC

Storage Temperature Range -40 to +85 °C

Suitable for lead-free soldering - Max Soldering Temperature 260°C for 30 s

456.00 MHz

SAW Filter

SF2073B

Pb

I. 200 ohm Matching ............page 2

II. 50 ohm Matching .............page 4

III. SMI 7035 Matching .......page 6

456.00 MHz SAW Filter

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 2 of 9

RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com

S11

S22

P10

P5

SF2073B

DEMO

BALANCE

P1

P6

1:4 4:1

3.9pf

18nh

18nh 16nh

16nh

0603 coilcraft inductor

I. Impedance Matching for Differential 200 Ohm Load: Coilcraft Inductors

(SAW Matched to 200 Ohms Balanced, 4:1 Transformers Account for 2dB of Loss)

456.00 MHz SAW Filter

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 3 of 9

RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com

CH1 S21 DEL 50 ns/ REF 580 ns

C

Smo

CH3 S21 LOG 1 dB/ REF -15.41 dB

CENTER 456 .000 000 MHz SPAN 14 .000 000 MHz

C

1 May 2006 15:13:37

12

3

3:-1 .3663 ns -10 .000 000 MHz

REF=2

CH1 Markers

mean :575 .92 ns

s.dev :6.9993 ns

p-p :30 .436 ns

12

3

3:-.89960 dB -10 .000 000 MHz

REF=2

CH3 Markers

mean :-15 .215 dB

s.dev : . 28750 dB

p-p :1.2745 dB

SF2073B

demo 16

Full

CH1 S11 1 U FS

CENTR 456 .000 MHz SPAN 40 .000 MHz

Cor

CH2 S21 LOG 10 dB/ REF -15 dB

START 436 .000 000 MHz STOP 476 .000 000 MHz

Cor

CH3 S22 1 U FS

CENTR 456 .000 MHz SPAN 40 .000 MHz

Cor

1 May 2006 15:05:21

1

1:54 .389 10 .383 3.6239 nH

456 .000 000 MHz

1

2

3 4

1:0.0000 dB 0.000 000 MHz

Max REF=1

CH2 Markers

BW:10 .165654 MHz

cent :456 .277377 MHz

Q: 44 .884

1_ loss :-14 .794 dB

1

1:58 .283 1.2910 450 .60 pH

456 .000 000 MHz

SF2073B

demo 16

Full

I. Impedance Matching for Differential 200 Ohm Load: Coilcraft Inductors

(SAW Matched to 200 Ohms Balanced, 4:1 Transformers Account for 2dB of Loss)

456.00 MHz SAW Filter

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 4 of 9

RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com

CH1 S21 DEL 20 ns/ REF 626.4 ns

CH1 CENTER 456 .000 000 MHz SPAN 12 .000 000 MHz

Cor

Smo

PRm

CH2 S21 LOG .5 dB/ REF -9.386 dB

CH2 CENTER 456 .000 000 MHz SPAN 12 .000 000 MHz

sf2073B

narrow span

C

PRm

9 Jun 2005 16:00:19

1

2

2:-2 .3948 ns 10 .000 000 MHz

REF=1

CH1 Markers

mean :534 .52 ns

s.dev :5.6156 ns

p-p :23 .778 ns

1

2

2:-.37890 dB 10 .000 000 MHz

REF=1

CH2 Markers

mean :-11 .551 dB

s.dev : . 10500 dB

p-p : . 62390 dB

II. Impedance Matching for Single Ended 50 Ohm load.

50 ohm

456.00 MHz SAW Filter

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 5 of 9

RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com

CH1 S11 1 U FS

CENTR 456 .000 MHz SPAN 80 .000 MHz

Cor

PRm

CH2 S21 LOG 10 dB/ REF -40 dB

CENTER 456 .000 000 MHz SPAN 80 .000 000 MHz

sf2073B

single 50

Cor

PRm

CH3 S22 1 U FS

CENTR 456 .000 MHz SPAN 80 .000 MHz

Cor

3 Jun 2005 14:55:19

1

1:50 .992 -1 .4707 237 .32 pF

456 .000 000 MHz

1

2

3 4

1:0.0000 dB 0.000 000 MHz

Max REF=1

CH2 Markers

BW:10 .971922 MHz

cent :456 .090221 MHz

Q:41 .569

1_ loss :-11 .233 dB

1

1:47 .150 10 .828 3.7793 nH

456 .000 000 MHz

II. Impedance Matching for Single Ended 50 Ohm load.

456.00 MHz SAW Filter

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 6 of 9

RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com

III. Impedance Matching on SMI Radio Board: SMI 7035

456.00 MHz SAW Filter

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 7 of 9

RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com

456.00 MHz SAW Filter

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 8 of 9

RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com

SMP-03 Case

Recommended PCB Footprint

Case Dimensions

Dimension mm Inches

Min Nom Max Min Nom Max

A6.80 7.00 7.20 0.268 0.276 0.283

B4.80 5.00 5.20 0.189 0.197 0.205

C1.50 1.65 2.00 0.059 0.065 0.079

D.47 0.60 .73 0.019 0.024 0.029

E2.41 2.54 2.67 0.095 0.100 0.105

H0.87 1.0 1.13 0.034 0.039 0.044

J4.87 5.00 5.13 0.192 0.197 0.202

K2.87 3.00 3.13 0.113 0.118 0.123

P1.14 1.27 1.40 0.045 0.050 0.055

Materials

Solder Pad

Termination Au plating 30 - 60 µinches (76.2-152 µm) over 80-

200 µinches (203-508 µm) Ni.

Lid Fe-Ni-Co Alloy Electroless Nickel Plate (8-11%

Phosphorus) 100-200 µinches Thick

Body Al2O3 Ceramic

Pb Free

ElectricalConnections

Connection Terminals

Port 1 Input or Return 10

Return or Input 1

Port 2 Output or Return 5

Return or Output 6

Ground All others

Single Ended Operation Return is ground

Differential Operation Return is hot

A

BCHE

P

D

H

J

K

10-Terminal Ceramic Surface-Mount Case

7 x 5 mm Nominal Footprint

456.00 MHz SAW Filter

RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 E-mail: info@rfm.com Page 9 of 9

RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 http://www.rfm.com

Tape and Reel Specifications

“B “

Nominal Size Quantity Per Reel

Inches millimeters

7178 500

13 330 2000

USER DIRECTION OF FEED

COMPONENT ORIENTATION and DIMENSIONS

See Detail "A"

13.0

20.2

2.0

12.0

100 REF.

"B" REF.

PIN #1

Carrier Tape Dimensions Tolerance

Ao 5.5 mm ± 0.1mm

Bo 7.5 mm ± 0.1mm

Ko 2.0 mm ± 0.1mm

Pitch 8.0 mm ± 0.1mm

W16.0 mm ± 0.2mm