6 Port Gigabit Industrial PoE+ Ethernet switch with 2 SFP ports ESWGP206-2SFP-T * IEEE 802.3at/af PoE+ standard ports * Up to 30 watts output per PoE+ port * Smart PoE+ over current, over temp & short circuit protection * -40 to 85C operating temperature range * Industrial IP30 rated DIN rail enclosure * SFP slot for Gigabit Fiber * Dual power inputs, 24 to 52 VDC * Remote PD reset PRODUCT FEATURES The ESWGP206-2SFP-T is an Industrial PoE+ Ethernet switch that complies with IEEE 802.3at standards. It provides four PoE+ 10/100/1000Mbps copper ports supplying up to 30W of power to PD devices such as CCTV and WI-FI. Two 1000Mbps SFP ports are available to support gigabit fiber. The ESWGP206-2SFP-T also provided remote PD reset function to help eliminate the cost of sending personal to site. Unmanaged and easy to install in a variety of Ethernet applications, it provides PoE+, dual power inputs, wide temperature and an SFP form factor. The ESWGP206-2SFP-T is designed to work in hard to reach and harsh environments. Power over Ethernet PoE+ 802.3at provides 30W of power per port and is backwards compatible with 802.3.af devices. The switch detects and classifies a PD device before providing the required power to the PD device. PoE power simplifies the installation of PD devices by eliminating the need for additional cable and power supplies. ORDERING INFORMATION MODEL NUMBER ESWGP206-2SFP-T DESCRIPTION Industrial PoE+ Ethernet Switch (4 Copper, 2 SFP) ACCESSORIES MODEL NUMBER DESCRIPTION 808-38201 IIE-SFP/1250-ED, MM850-LC, 220/550m 808-38200 IE-SFP/1250-ED, SM1310-LC, 20KM 808-38203 IE-SFP-1250-ED, SM1310/PLUS-LC, 40KM SDR-240-24 DIN rail mount power supply 24VDC, 10A, 240W output power Dual Power Input: To reduce the risk of power failure, the ESWGP2062SFP-T provides two 24 to 52 VDC power inputs. If the power fails, the switch will automatically use the secondary power input. Flexible Mounting: The switch features a space saving IP30 metal enclosure that can be DIN or Panel mounted. Small Form-factor Pluggable (SFP) Port: The SFP Port provides flexibility when planning a network. The slot can accept any MSAcompliant SFP module. Gigabit fiber types for SM,MM & SSF. Wide Operating Temperature: With an operating temperature of -40 to 85C (-40 to 185F), this switch is suitable for use in some of the harshest industrial environments. Remote PoE+ Reset: Dip switch selectable, the PoE+ reset works on fiber loss off signal on both slots. PoE+ reset is an advanced function that, when enabled, will force the PSE output power to reset when LINK state is lost on the SFP ports Easy Troubleshooting: LED indicators allow you to quickly diagnose problems. www.advantech-bb.com / Enabling an Intelligent Planet All product specifications are subject to change without notice. ESWGP206-2SFP-T_3715ds 6 Port Gigabit Industrial PoE+ Ethernet switch with 2 SFP ports ESWGP206-2SFP-T SPECIFICATIONS TECHNOLOGY Standard POWER REQUIREMENTS IEEE802.3, 802.3u, 802.3x, 802.3z, 802.3ab, 802.3af/at Processing Type Store and forward Broadcast Storm Disabled Flow Control Full Duplex Flow Control, Half Duplex Back Pressure Control Protocols CSMA/CD (Carrier Sense Multiple Access/Collision Detect) Input Voltage 24 to 52VDC redundant power inputs Power Budget 130W Input Connection Standard 4-pin terminal block PHYSICAL CHARACTERISTICS SWITCH PROPERTIES Case Slim Metal Case, IP30 Design Dimensions 4.5x14.5 x10.8cm (1.77 x 5.70 x 4.25in) Installation DIN Rail or Panel Mounting ENVIRONMENTAL MAC Table Size 2W max. Packet Buffer Size 128K Jumbo Frame Size Supports up to 9720 bytes INTERFACE RJ-45 Port Auto-negotiation 10/100/1000Base-T, Full/Half Duplex, Auto-MDI/MDIX Fiber Ports SFP form factor for MSA-compliant Gigabit SFPs PoE+ Pinout V+, V+, V-, V-, for 1,2,3,6 Alternative A LED Indicators P1, P2, 10/100/1000Mbps, POE+ (1~4) DIP Switch DIP 1- POE ON/OFF RESET DIP 2 - POE AUTO RESET WARRANTY Operating Temp -40 to 85C Storage Temp -40 to 85C Ambient Relative Humidity 5 to 95% (Non-condensing) CERTIFICATIONS Safety IEC/UL/EN60950-1 EMI CE, FCC Part 15, EN55022: Class A CE EN61000-6-4 (Industrial) EMS CE EN61000-4-2 (ESD) CE EN61000-4-3 (RS) CE EN61000-4-4 (EFT) CE EN61000-4-5 (Surge) CE EN61000-4-6 (CS) CE EN61000-4-8 CE EN61000-4-11 EN61000-6-2 (Industrial) Free Fall IEC60068-2-32 Shock IEC60068-2-27 Vibration IEC60068-2-6 Limited Lifetime RoHS, REACH, WEEE MECHANICAL DIAGRAM orders@advantech-bb.com support@advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445