6KA24HE3_A/C - VISHAY - Datasheet.Directory

6KA24

www.vishay.com Vishay General Semiconductor

Revision: 08-Nov-16 1Document Number: 88309

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PAR® Transient Voltage Suppressors

High Temperature Stability and High Reliability Conditions

FEATURES

• Junction passivation optimized design

passivated anisotropic rectifier technology

•T

J = 185 °C capability suitable for high

reliability and automotive requirement

• Excellent clamping capability

• Low leakage current

• High surge capability

• Solder dip 275 °C max. 10 s, per JESD 22-B106

• AEC-Q101 qualified

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and lighting,

especially for automotive load dump protection application.

MECHANICAL DATA

Case: P600, molded epoxy over passivated junction

Molding compound meets UL 94 V-0 flammability rating

Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified

(“_X” denotes revision code e.g. A, B, .....)

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

HE3 suffix meets JESD 201 class 2 whisker test

Polarity: Color band denotes cathode end

Notes

(1) Non-repetitive current pulse, per fig. 2, with a 10/1000μs waveform

(2) Non-repetitive current pulse, per fig. 5, with a 10 μs/50 ms waveform

(3) Measured on 8.3 ms half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum

PRIMARY CHARACTERISTICS

VWM 24 V

VBR 26.7 V to 32.6 V

PPPM (10 x 1000 μs) 6000 W

PPPM (10 μs/50 ms) 2000 W

PD6.5 W

IRSM 90 A

IFSM 400 A

TJ max. 185 °C

Polarity Uni-directional

Package P600

P600

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL LIMIT UNIT

Peak pulse power dissipation with 10/1000 μs waveform (1)

PPPM

6000 W

with 10μs/50 ms waveform (2) 2000

Power dissipation on infinite heatsink at TL = 75 °C (fig. 3) PD6.5 W

Maximum working stand-off voltage VWM 24 V

Peak forward surge current 8.3 ms single half sine-wave (3) IFSM 400 A

Operating junction and storage temperature range TJ, TSTG -65 to +185 °C

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

DEVICE TYPE

BREAKDOWN VOLTAGE

VBR AT IT

(V)

TEST CURRENT

(mA)

STAND-OFF VOLTAGE

VWM

(V)

MIN. MAX.

6KA24 26.7 32.6 100 24

6KA24

www.vishay.com Vishay General Semiconductor

Revision: 08-Nov-16 2Document Number: 88309

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) Measured on 80 μs square pulse width

(2) Measured on 300 μs square pulse width

Note

(1) AEC-Q101 qualified



RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Fig. 1 - Peak Pulse Power Rating Curve Fig. 2 - 10/1000 μs Pulse Waveform

ADDITIONAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL LIMIT UNIT

Maximum DC reverse leakage current VWM = 24 V TA = 25 °C ID

1.0 μA

TA = 150 °C 50

Reverse breakdown voltage 100 mA TA = 150 °C min. VBR

29.7 V

TA = 150 °C max. 36.7

Maximum clamping voltage IPP = 90 A (1) TA = 25 °C VC

40 V

TA = 150 °C 45

Maximum instantaneous forward voltage 100 A (2) VF1.8 V

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

6KA24HE3_A/C (1) 2.710 C 800 13" diameter paper tape and reel

100

1.0 µs 10 µs 100 µs 1.0 ms 10 ms 100 ms

PPM

- Peak Pulse Power (kW)

td - Pulse Width (s)

Non-Repetitive Pulse

Waveform shown in Fig. 2

TA = 25 °C

100

150

= 10 µs

Peak Value

IPPM

Half Value -

IPPM

10/1000 µs Waveform

as defined by R.E.A.

01.0 2.0 3.0 4.0

t - Time (ms)

PPM

- Peak Pulse Current, % I

RSM

= 25 °C

Pulse Width (t

)

is defined as the Point

where the Peak Current

decays to 50 % of I

PPM

6KA24

www.vishay.com Vishay General Semiconductor

Revision: 08-Nov-16 3Document Number: 88309

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 3 - Pulse Derating Curve

Fig. 4 - Maximum Non-Repetitive Peak Forward Surge Current

Fig. 5 - 10 μs/50 ms Pulse Waveform

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

L = 0.375" (9.5 mm)

Lead Lengths

Power Dissipation

0 50 100 150 175

100

Percentage of Rated Power (%)

TL - Lead Temperature (°C)

Peak Power (Single Pulse)

TJ = Initial Temperature

1 5 10 50 100

300

250

200

150

100

400

350

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

= T

max.

8.3 ms Single Half Sine-Wave

100

150

050 100 150 200

= 10 µs

10 µs/50 ms Waveform

as defined by R.E.A.

t - Time (ms)

PPM

- Peak Pulse Current, % I

Peak Value

PPM

Half Value -

PPM

= 25 °C

Pulse Width (t

)

is defined as the Point

where the Peak Current

decays to 50 % of I

PPM

0.052 (1.32)

0.048 (1.22)

0.360 (9.1)

0.340 (8.6)

DIA.

1.0 (25.4)

MIN.

0.360 (9.1)

0.340 (8.6)

1.0 (25.4)

MIN.

P600

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2021 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.