SMD TCXO/VCTCXO for GPS Applications Model: FOX923_-GP SERIES RoHS Compliant / Pb Free Rev. 6/21/2011 Page 1 of 1 http://www.foxonline.com/need_a_sample.htm FEATURES OPTIONS * * * * * * Voltage Control 0.5PPM Stability Supply Voltages of 1.8V ~ 3.3V 1.2 mm Max Height Clipped SINE Output Tape and Reel (3,000 pcs. STD) * PART NUMBER SELECTION Learn More - Internet Required Supply Model Voltage (Vdd) Number 3.3V 5% FOX923C-GP 3.3V 5% FOX923CE-GP 3.0V 5% FOX923B-GP 3.0V 5% FOX923E-GP 2.8V 5% FOX923D-GP 2.8V 5% FOX923DE-GP 2.7V 5% FOX923F-GP 2.7V 5% FOX923FE-GP 2.5V 5% FOX923G-GP 2.5V 5% FOX923GE-GP 1.8V 5% FOX923L-GP 1.8V 5% FOX923LE-GP Part Number 673CGP-Frequency-xxxxx 638CGP-Frequency-xxxxx 673GP-Frequency-xxxxx 638GP-Frequency-xxxxx 673DGP-Frequency-xxxxx 638DGP-Frequency-xxxxx 673FGP-Frequency-xxxxx 638FGP-Frequency-xxxxx 673GGP-Frequency-xxxxx 638GGP-Frequency-xxxxx 673LGP-Frequency-xxxxx 638LGP-Frequency-xxxxx TCXO/VCTCXO TCXO VCTCXO TCXO VCTCXO TCXO VCTCXO TCXO VCTCXO TCXO VCTCXO TCXO VCTCXO #4 #3 Marking Top View 2.50.2 #1 #2 Dot denotes pin 1. 1.2 Max 1.95 * ELECTRICAL CHARACTERISTICS PARAMETERS MAX (unless otherwise noted) Frequency Range (Fo) Temperature Range Operating (Topr) Storage (Tstg) Supply Voltage (Vdd) Input Current (Idd) See Table Below #1 Bottom View 0.65 #4 -30C ~ +85C -40C ~ +90C 1.8V ~ 3.3V 2.0mA #3 R eco m m e nded S olde r P a d Layout Initial Frequency Tolerance @ 25C (after 2 reflows) (VCTCXO: Vc = 0.5Vdd)1 Frequency Stability Over Temperature Range Over Supply Voltage Change (Vdd 5%) Over Load Change (10K 10%//10pF10%) Output Waveform (Clipped Sine) Peak-to-Peak Level (Vp-p) Output Load Pullability Vdd = 2.5V~3.3V, Vc = 50% Vdd 1.0V Vdd = 1.8V, Vc = 0.9V 0.6V Aging per year Phase Noise (26.000MHz, @ 10kHz offset) Reflow Soldering Temp Moisture Sensitivity Level (MSL) Termination Finish #2 2.0 PPM 1.6 0.5 PPM 0.3 PPM 0.2 PPM 1.3 #4 #3 0.8V Min 10K 10% // 10pF 10% 5 ~ 15PPM 3 ~ 5PPM 1.0PPM -145 dBc/Hz Typical 260C / 10 Seconds 1 Au 1.3 0.4 #1 #2 All dimensions are in millimeters. Pin Connections TCXO #1 NC #3 Output #2 GND #4 VDD VCTCXO #1Vc #3 Output #2 GND #4 V DD * STANDARD FREQUENCIES2&3 13.000MHz 16.367677 MHz 19.200 MHz 27.456 MHz 16.367 MHz 16.368 MHz 23.104 MHz 16.3676 MHz 16.369 MHz 24.5535 MHz 16.367667 MHz 16.800 MHz 26.000 MHz 1 For proper operation, a control Voltage (Vc) must be applied to pin 1 on VCTCXO's. Does not imply a stocked part. All frequencies may not be available for all Vdd. 3 Other fequencies may be available. Contact Fox Technical support with your requirements. *Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may very. All specifications subject to change without notice. 2 FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 www.foxonline.com EMEA Tel: +44 .11283.568153 | Canada +1.888.438.2369 | Asia Hong Kong Tel: +852.2854.4285 | Japan Tel: +81.3.3374.2079 (c) 2011 FOX ELECTRONICS | ISO9001:2008 Certified SMD TCXO/VCTCXO for GPS Applications Model: FOX923_-GP SERIES RoHS Compliant / Pb Free Page 2 of 2 * TAPE SPECIFICATIONS (millimeters) B C MODEL A FOX923_-GP 1.5 4.0 4.0 FOXElectronics Rev. 6/21/2011 http://www.foxonline.com/need_a_sample.htm D 3.5 * REEL SPECIFICATIONS (millimeters) G H I J K L E F STD Reel QTY MODEL 2.0 21 60 180 9.0 13 FOX923_-GP 8.0 1.4 3,000 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 www.foxonline.com EMEA Tel: +44 .11283.568153 | Canada +1.888.438.2369 | Asia Hong Kong Tel: +852.2854.4285 | Japan Tel: +81.3.3374.2079 (c) 2011 FOX ELECTRONICS | ISO9001:2008 Certified M 1.5 17