ALUMINUM ELECTROLYTIC CAPACITORS HE Miniature Sized, Low Impedance,High Reliability Approved by Reliability Center for Electronic Component, Japan-Certification No. RCJ-03-23C series Low impedance and high reliability withstanding 4000 hours to 10000 hours. Compliant to the RoHS directive (2002/95/EC). HE HD Long Life Specifications ltem Performance Characteristics Category Temperature Range - 40 to +105C Rated Voltage Range 6.3 to 100V Rated Capacitance Range 0.47 to 18000F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (A), whichever is greater. Rated voltage (V) 6.3 10 16 25 35 50 63 100 120Hz tan (MAX.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08 20C 120Hz Tangent of loss angle (tan ) For capacitance of more than 1000F, add 0.02 for every increase of 1000F. 6.3 10 16 25 35 50 63 100 Z-25C / Z+20C 4 3 2 2 2 2 2 2 Z-40C / Z+20C 8 6 4 3 3 3 3 3 Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) The following specifications shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied at 105C , the peak voltage shall not exceed the rated voltage. D < = 6.3 D = 8 , 10 6.3 to 10WV 4000 hours 6000 hours 8000 hours 16 to 100WV 5000 hours 7000 hours 10000 hours Case size Rated voltage (V) Endurance D > = 12.5 Capacitance change Within 25% of the initial capacitance value tan 200% or less than the initial specified value Leakage current Less than or equal to the initial specified value Printed with white color letter on black sleeve. Marking Type numbering system (Example : 10V 1000F) Radial Lead Type d 1 Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 U HE 1 A 1 0 2 M PD P 0.5 D+0.5 MAX. Size code Configuration Capacitance tolerance ( 20%) Rated capacitance (1000F) L+ 15MIN MAX. 4MIN Rated voltage (10V) Pressurerelief vent (6.3up) Series name (mm) (L < 20) 1.5 (L 20) 2.0 D 5 6.3 8 10 12.5 16 18 P 2.0 2.5 3.5 5.0 5.0 7.5 7.5 d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 Type Configuration D In case L > 25 for the 12.5 dia. unit, lead dia. d = 0.8mm * Please refer to page 20 about the end seal configulation. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more 0.45 0.55 0.70 0.90 1.00 39 to 330 0.60 0.70 0.85 0.95 1.00 390 to 1000 0.65 0.75 0.90 0.98 1.00 1200 to 18000 0.75 0.80 0.95 1.00 1.00 Cap. (F) 0.47 to 33 Pb-free leadwire Pb-free PET sleeve 5 DD 6.3 8 * 10 12.5 to 18 ED PD HD Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100Z ALUMINUM ELECTROLYTIC CAPACITORS HE series Standard Ratings V (Code) Item Cap.(F) Code 100 101 150 151 220 221 330 331 470 471 680 681 6.3 (0J) Case size D x L (mm) 5 x 11 6.3 x 11 8 x 11.5 10 (1A) Rated ripple (mArms) 20C / 100kHz -10C / 100kHz 105C / 100kHz Impedance () MAX. 0.58 0.22 0.13 2.3 0.87 0.52 5 x 11 0.58 2.3 210 6.3 x 11 0.22 0.87 340 8 x 11.5 0.13 0.52 640 340 640 821 10 x 12.5 0.080 0.32 865 1000 102 8 x 15 0.087 0.35 840 8 x 20 0.069 0.27 1050 10 x 16 0.060 0.24 1210 122 1500 152 10 x 20 0.046 0.18 1400 1800 182 12.5 x 15 0.049 0.16 1450 8 x 15 0.087 0.35 840 10 x 12.5 0.080 0.32 865 8 x 20 0.069 0.27 1050 10 x 16 0.060 0.24 1210 10 x 20 0.046 0.18 1400 10 x 25 0.042 0.17 1650 12.5 x 15 0.049 0.16 1450 0.031 0.12 1910 12.5 x 20 0.035 0.12 1900 16 x 15 0.042 0.12 1940 18 x 15 0.043 0.11 2210 10 x 31.5 2200 2700 222 272 3300 332 3900 392 4700 5600 6800 8200 10000 12000 472 562 682 822 103 123 Rated ripple (mArms) 20C / 100kHz -10C / 100kHz 105C / 100kHz Impedance () MAX. 210 820 1200 Case size D x L (mm) 10 x 25 0.042 0.17 1650 10 x 31.5 0.031 0.12 1910 16 x 15 0.042 0.12 1940 12.5 x 20 0.035 0.12 1900 12.5 x 25 0.027 0.089 2230 12.5 x 25 0.027 0.089 2230 12.5 x 31.5 0.024 0.078 2650 18 x 15 0.043 0.11 2210 16 x 20 0.027 0.078 2530 12.5 x 31.5 0.024 0.078 2650 12.5 x 35.5 0.020 0.065 2880 12.5 x 35.5 0.020 0.065 2880 12.5 x 40 0.017 0.056 3350 16 x 20 0.060 2930 0.078 2530 16 x 25 0.021 0.027 18 x 20 0.026 0.067 2860 16 x 31.5 0.017 0.050 3450 12.5 x 40 0.017 0.056 3350 16 x 25 0.021 0.060 2930 18 x 20 0.026 0.067 2860 16 x 31.5 0.017 0.050 3450 18 x 25 0.019 0.049 3140 16 x 35.5 0.015 0.044 3610 18 x 31.5 0.015 0.040 4170 16 x 35.5 0.015 0.044 3610 16 x 40 0.013 0.038 4080 18 x 25 0.019 0.049 3140 18 x 35.5 0.014 0.038 4220 16 x 40 0.013 0.038 4080 18 x 31.5 18 x 40 0.012 0.032 4280 0.015 0.040 4170 15000 153 18 x 35.5 0.014 0.038 4220 18000 183 18 x 40 0.012 0.032 4280 : In this case, 6 will be put 12th digit type numbering system. : In this case, 3 will be put 12th digit type numbering system. CAT.8100Z ALUMINUM ELECTROLYTIC CAPACITORS HE series Standard Ratings V (Code) Item Cap.(F) Code 47 470 56 560 100 101 120 121 220 221 330 470 680 331 471 681 820 821 1000 102 16 (1C) Case size D x L (mm) 5 x 11 6.3 x 11 8 x 11.5 25 (1E) Rated ripple Impedance () MAX. (mArms) 20C / 100kHz -10C / 100kHz 105C / 100kHz 0.58 0.22 0.13 2.3 0.87 0.52 5 x 11 0.58 2.3 210 6.3 x 11 0.22 0.87 340 8 x 11.5 0.13 0.52 640 8 x 15 0.087 0.35 840 10 x 12.5 0.080 0.32 865 840 8 x 20 0.069 0.27 1050 210 340 640 0.087 0.35 10 x 12.5 0.080 0.32 865 10 x 16 0.06 0.24 1210 8 x 20 0.069 0.27 1050 10 x 20 0.046 0.18 1400 10 x 16 0.060 0.24 1210 12.5 x 15 0.049 0.16 1450 10 x 25 0.042 0.17 1650 10 x 31.5 12.5 x 15 0.046 0.049 0.18 0.16 1400 1450 1200 122 10 x 25 0.042 0.17 1650 10 x 31.5 0.031 0.12 1910 1500 152 12.5 x 20 0.035 0.12 1900 16 x 15 0.042 0.12 1940 2200 2700 3300 3900 4700 5600 182 222 272 332 392 472 562 Rated ripple (mArms) 20C / 100kHz -10C / 100kHz 105C / 100kHz Impedance () MAX. 8 x 15 10 x 20 1800 Case size D x L (mm) 0.031 0.12 1910 12.5 x 20 0.035 0.12 1900 16 x 15 0.042 0.12 1940 18 x 15 0.043 0.11 2210 12.5 x 25 0.027 0.089 2230 12.5 x 31.5 0.024 0.078 2650 16 x 20 0.027 0.078 2530 12.5 x 25 0.027 0.089 2230 12.5 x 35.5 0.020 0.065 2880 18 x 15 0.043 0.11 2210 18 x 20 0.026 0.067 2860 12.5 x 31.5 0.024 0.078 2650 12.5 x 40 0.017 0.056 3350 16 x 20 0.027 0.078 2530 16 x 25 0.021 0.060 2930 16 x 31.5 0.017 0.050 3450 18 x 25 0.019 0.049 3140 16 x 35.5 0.015 0.044 3610 12.5 x 35.5 0.020 0.065 2880 12.5 x 40 0.017 0.056 3350 16 x 25 0.021 0.060 2930 16 x 20 0.026 0.067 2860 18 x 31.5 0.015 0.040 4170 16 x 31.5 0.017 0.050 3450 16 x 40 0.013 0.038 4080 18 x 25 0.019 0.049 3140 18 x 35.5 0.014 0.038 4220 16 x 35.5 0.015 0.044 3610 18 x 31.5 18 x 40 0.012 0.032 4280 0.015 0.040 4170 6800 682 16 x 40 0.013 0.038 4080 8200 822 18 x 35.5 0.014 0.038 4220 10000 103 18 x 40 0.012 0.032 4280 : In this case, 6 will be put 12th digit type numbering system. : In this case, 3 will be put 12th digit type numbering system. CAT.8100Z ALUMINUM ELECTROLYTIC CAPACITORS HE series Standard Ratings V (Code) Item Cap.(F) 0.47 Code 35 (1V) Case size D x L (mm) 50 (1H) Rated ripple (mArms) 20C / 100kHz -10C / 100kHz 105C / 100kHz Impedance () MAX. Case size D x L (mm) R47 5 x 11 Rated ripple (mArms) 20C / 100kHz -10C / 100kHz 105C / 100kHz Impedance () MAX. 5.5 22 17 1 010 5 x 11 4 16 30 2.2 2R2 5 x 11 2.5 10 43 3.3 3R3 5 x 11 2.2 8.8 53 4.7 4R7 5 x 11 1.9 7.6 88 10 100 5 x 11 1.5 6 100 22 220 5 x 11 0.70 2.8 180 33 330 47 470 6.3 x 11 5 x 11 0.58 2.3 210 6.3 x 11 0.22 0.87 340 56 560 0.30 1.2 295 100 101 8 x 11.5 0.17 0.68 555 120 121 8 x 15 0.12 0.48 730 150 151 10 x 12.5 0.12 0.48 760 180 181 8 x 20 0.091 0.36 910 10 x 16 0.084 0.34 1050 10 x 20 0.060 0.24 1220 8 x 11.5 0.13 0.52 640 8 x 15 0.087 0.35 840 10 x 12.5 0.080 0.32 865 220 221 270 271 8x20 0.069 0.27 1050 12.5 x 15 0.061 0.20 1260 330 331 10 x 16 0.060 0.24 1210 10 x 25 0.055 0.22 1440 10 x 20 0.046 0.18 1400 10 x 31.5 0.043 0.17 1690 12.5 x 20 0.045 0.15 1660 470 560 680 471 561 681 820 821 1000 102 1200 122 1500 152 1800 182 2200 222 2700 272 3300 332 3900 392 12.5 x 15 0.049 0.16 1450 10 x 25 0.042 0.17 1650 10 x 31.5 0.031 0.12 1910 12.5 x 20 0.035 0.12 1900 16 x 15 0.042 0.12 1940 16 x 15 0.055 0.17 1690 12.5 x 25 0.034 0.11 1950 18 x 15 0.054 0.15 1930 12.5 x 31.5 0.030 0.10 2310 12.5 x 35.5 0.025 0.083 2510 16 x 20 0.034 0.10 2210 12.5 x 25 0.027 0.089 2230 12.5 x 40 0.021 0.069 2920 18 x 15 0.043 0.11 2210 16 x 25 0.025 0.075 2555 18 x 20 0.036 0.097 2490 16 x 31.5 0.022 0.066 3010 12.5 x 31.5 0.024 0.078 2650 16 x 20 0.027 0.078 2530 18 x 25 0.026 0.070 2740 12.5 x 35.5 0.020 0.065 2880 16 x 35.5 0.019 0.057 3150 12.5 x 40 0.017 0.056 3350 16 x 25 0.021 0.060 2930 16 x 40 0.016 0.048 3710 18 x 20 0.026 0.067 2860 18 x 31.5 0.021 0.057 3635 16 x 31.5 0.017 0.050 3450 18 x 25 0.019 0.049 3140 18 x 35.5 0.017 0.046 3680 16 x 35.5 0.015 0.044 3610 18 x 31.5 0.015 0.040 4170 18 x 40 0.014 0.038 3800 16 x 40 0.013 0.038 4080 18 x 35.5 0.014 0.038 4220 18 x 40 0.012 0.032 4280 : In this case, 6 will be put 12th digit type numbering system. : In this case, 3 will be put 12th digit type numbering system. CAT.8100Z ALUMINUM ELECTROLYTIC CAPACITORS HE series Standard Ratings V (Code) Item Cap.(F) Code Case size D x L (mm) 9.3 62 5.0 126 8 x 11.5 0.63 2.8 260 390 8 x 15 0.45 2.1 335 470 10 x 12.5 0.43 1.8 325 8 x 20 0.33 1.6 408 10 x 16 0.31 1.5 400 270 33 330 39 47 56 560 68 680 82 820 100 101 120 121 150 151 180 181 221 5 x 11 6.3 x 11 8 x 11.5 560 680 820 1000 271 331 391 471 561 681 821 102 1200 122 1500 152 2.3 1.2 0.63 9.3 5.0 2.8 62 126 260 8 x 15 0.45 2.1 335 10 x 20 0.21 0.94 518 10 x 12.5 0.43 1.8 325 12.5 x 15 0.23 1.1 527 10 x 25 0.20 0.84 595 10 x 31.5 0.15 0.71 740 12.5 x 20 0.16 0.64 765 16 x 15 0.14 0.66 895 8 x 20 0.33 1.6 408 10 x 16 0.31 1.5 400 10 x 20 0.21 0.94 518 12.5 x 25 0.12 0.45 875 12.5 x 15 0.23 1.1 527 18 x 15 0.12 0.50 1030 10 x 25 0.42 1010 0.84 595 12.5 x 31.5 0.10 0.20 16 x 20 0.091 0.38 1130 12.5 x 35.5 0.083 0.35 1140 10 x 31.5 470 Rated ripple (mArms) 20C / 100kHz -10C / 100kHz 105C / 100kHz Impedance () MAX. 1.2 27 390 Case size D x L (mm) 2.3 150 330 Rated ripple (mArms) 20C / 100kHz -10C / 100kHz 105C / 100kHz Impedance () MAX. 5 x 11 6R8 15 270 100 (2A) 6.3 x 11 6.8 220 63 (1J) 0.15 0.71 740 12.5 x 20 0.16 0.64 765 16 x 15 0.14 0.66 895 12.5 x 25 0.12 0.45 875 16 x 25 0.073 0.27 1350 12.5x 40 0.071 0.30 1280 18 x 20 0.080 0.30 1300 16 x 31.5 0.054 0.20 1650 18 x 15 0.12 0.50 1030 18 x 25 0.057 0.21 1560 12.5 x 31.5 0.10 0.42 1010 16 x 35.5 0.045 0.17 1900 16 x 20 0.091 0.38 1130 18 x 31.5 0.047 0.17 1720 12.5 x 35.5 0.083 0.35 1140 16 x 25 16 x 40 0.040 0.15 2130 0.073 0.27 1350 12.5 x 40 0.071 0.30 1280 18 x 20 18 x 35.5 0.040 0.15 1890 0.080 0.30 1300 16 x 31.5 0.054 0.20 1650 18 x 25 18 x 40 0.036 0.13 2470 0.057 0.21 1560 16 x 35.5 0.045 0.17 1900 18 x 31.5 0.047 0.17 1720 16 x 40 0.040 0.15 2130 18 x 35.5 0.040 0.15 1890 18 x 40 0.036 0.13 2470 : In this case, 6 will be put 12th digit type numbering system. : In this case, 3 will be put 12th digit type numbering system. CAT.8100Z