FX15S-31S-0.5SH - HIROSE ELECTRIC

1mm Pitch Wire-to-Board Connectors supporting LVDS signal

FX15 Series

Contacts consolidated into 1 row for equal length transmission lines

Mating side: 1 mm pitch, staggered 2-row construction

Termination side: 0.5mm pitch, 1-row construction

■Features

1. Space-saving

Reduction in space is achieved by designing the

contacts in 2-row staggered 1mm pitch on the

mating side and on a single row 0.5mm pitch on

the termination side (Fig.1).

2. Equal length transmission lines

Contact configuration provides equal length

transmission lines, which prevents LVDS signal

loss within the connector.

3. Variations

Availability of shielded and non-shielded types

allows for design flexibility and cost reduction.

4. Self alignment and self-guiding

Built-in guide posts allow secure self-alignment

within ±1.5mm (Fig.2).

5. Secure and complete mating / unmating

Side latch locking provides complete and secure

mating, as well as easy unmating (Fig.3).

6. Enhanced shielding performance with

FX15S

Enlarged metal shields prevent intrusion and

emission of electromagnetic interference, which

enhances the integrity of the LVDS signal (Fig.4).

7. RoHS compliant

All materials and substances used to produce this

product comply with RoHS standards.

Space saving, Equal length transmission lines

0.1 0.2 0.3 0.5 1 2 31.5

-10

-20

-30

-40

-50

Frequency (GHz)

With metal

Without metal

Emitting Noise Level (dBm)

High Shielding Performance

Fig.1

Self-alignment of ±1.5mm

Side latch -locks

Large guide post

1.5mm

With metal shields

(FX15 and FX15S Series)

Without metal shields

(FX15M Series)

Fig.2

Fig.3

Fig.4

2015.10e

In cases where the application will demand a high level of reliability, such as automotive,

please contact a company representative for further information.

Dec.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

Note 1 : Includes temperature rise caused by current flow.

Note 2 : The term “storage” refers to products stored for long period of time prior to mounting and use. Operating

temperature and humidity range includes non-conducting condition of installed connectors in storage, shipment or

during transportation.

Note 3 : Includes wire conductor resistance (12mm long).

●Receptacle

●Plug

■Product Specifications

■Materials / Finish

Ratings Current rating

Voltage rating

0.5A

100V AC

Operating temperature range

Storage temperature range

-55ç to +80ç (Note 1)

-10ç to +60ç (Note 2)

Item Specification Conditions

1. Contact resistance 60mø max. (Note 3) 1mA

2. Insulation resistance 500Mø min. 100V DC

3. Withstanding voltage No flashover or insulation breakdown. 300V AC/one minute

4. Insertion-Extraction force 2N min., 30N max. With corresponding connector

5. Mating cycles Contact resistance : 80mø max.(Note 3) 50 cycles

6. Vibration resistance No electrical discontinuity of 1µs or more.

Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 2 hours, 3 axis

7. Shock resistance No electrical discontinuity of 1µs or more.

Acceleration of 490m/s

, 11ms durations, sine half-wave waveform, 3 cycles, 3axis.

8. Humidity resistance Contact resistance : 80mø max.

No damage, cracks, or parts dislocation.

(Note 3) 96 hours at 40ç, RH 90% to 95%

9. Temperature cycle Contact resistance : 80mø max. (Note 3)

Insulation resistance : 500Mø min.

Temperature : -55ç → +15ç to +35ç → +85ç → +15ç to +35ç

Time : 30 → 5 → 30 → 5 (Minutes) 5 cycles

10. Salt spray Contact resistance : 80mø max. (Note 3)

No corrosions 5% water solution for 48 hours.

Component Material Finish Remarks

Insulator Polyamide Color : Black UL94V-0

Contact Phosphor bronze Contact area : Gold plated

Termination area : Tin plated ---------------

Metal shell (shielded version only) FX15S : Nickel silver

FX15SC : Stainless steel

FX15S : ---------------

FX15SC : Tin plated ---------------

Metal fittings (shielded version only) Phosphor bronze Selective gold flash plated ---------------

Component Material Finish Remarks

Insulator Polyamide Color : Black UL94V-0

Contact Phosphor bronze Contact area : Gold plated

Termination area : Tin plated ---------------

Metal shell (shielded version only) Nickel silver --------------- ---------------

Metal latch locks (shielded version only) Stainless steel --------------- ---------------

Metal shell, metal latch locks

(on micro coax version only) Stainless steel Nickel plated ---------------

qSeries Name : FX15

wConfiguration Blank : With shields (or crimp contact)

15S : With shields – enhanced shielding

15SC : With shields – enhanced shielding

(PCB mounting pattern : VESA standard)

15M : Without shields

eNumber of contacts

rConnector type P : Male contact

S : Female contact

tContact pitch : 0.5 mm

yHousing configuration SH : Right angle

SV : Straight

uTermination

C : Crimp

0.5SD : Micro-coaxial cable

GND : Separate ground plate

iApplicable conductor 2830 : 28 to 30 AWG

3032 : 30 to 32 AWG

oPackaging PCF : Male contact / reel

!0Plating (contact area) B : Gold plated

!1Packaging Blank :

Embossed Packaging (1,000 pcs/reel)

(30) :

Embossed Packaging (100 pcs/reel)

FX15 S - 31 S - 0.5 SH (**)

●Receptacle

FX15 S - 31 P - C

●Plug

FX15 - 3032 PCF B

●Crimp contact

■Product Number Structure

!0oiq

!1ytrewq

rewq

Dec.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

■FX15 Series – Functional Diagram

Crimp contact

(FX15-3032-PCFB)

Crimp contact

(FX15-2830-PCFB)

Plugs Receptacles

Without shields

(FX15M-P-C)

Right angle, with shields

–enhanced shielding

(FX15S-S-0.5SH)

With shields – enhanced shielding

(FX15S-P-C)

Right angle, without shields

X15M-S-0.5SH)

With shields – enhanced shielding

PCB mouting pattern : VESA standard

X15SC-S-0.5SH)

With shields – enhanced shielding

PCB mouting pattern : VESA standard

X15SC-S-0.5SV)

With shields – enhanced shielding

28 to 30 AWG

X15SW-31P-C)

Micro-coaxial cable

(FX15S-P-0.5SD)

With shields-standard

(FX15-31P-C)

Vertical, with shields

(FX15-31S-0.5SV)

Ground plate

(FX15S-P-GND)

Dec.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

3.7±0.3

4±0.3

B±0.3

(A)

9.4±0.3

D±0.3

C±0.15

(13.45)

2.7±0.1

E±0.15

P=1±0.1

F±0.15

No.1

No.2

No.n

No.n-1

Polarizing mark

indicator

■Plugs

No.2

No.1

No.30

No.31

Polarizing mark

indicator

22.57±0.15

(27)

9.4±0.3

18.3±0.3

(13.45)

P=1±0.1

14±0.15

P=1±0.1

15±0.15

24.6±0.3

2.7±0.1

3.7±0.3

●With shields (FX15-31P-C)

Note 1 : Packaged in trays.

Note 2 : Dimensions in parenthesis ( ) are reference dimensions.

Part No. HRS No.

No. of contacts

RoHS

FX15-31P-C 575-2101-2 31 Yes

●With shields, enhanced shielding (FX15S-**P-C)

Note 1: Packaged in trays.

Note 2 : Dimensions in parenthesis ( ) are reference dimensions.

Part No. HRS No.

No. of contacts

A B C D E F RoHS

FX15S-31P-C 575-2106-6 31 27 24.6 22.6 18.3 14 15

Yes

FX15S-41P-C 575-2107-9 41 32 29.6 27.6 23.3 19 20

FX15S-51P-C 575-2103-8 51 37 34.6 32.6 28.3 24 25

Dec.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

C±0.3

F±0.15

P=1±0.1

E±0.15

No.1

No.n-1

No.2

No.n

B±0.3

9.55±0.3

(A)

(D)

(13)

(13.6)

4.2±0.3

Polarizing mark

indicator

●Without shields (FX15M-**P-C)

4±0.3

24.6±0.3

(27)

9.4±0.3

18.3±0.3 3.7±0.3

22.57±0.15

(13.45)

2.7±0.1

14±0.15

P=1±0.1

15±0.15No.1

No.2 No.30

No.31

Polarizing mark

indicator

● With shields – enhanced shielding

28 to 30 AWG (FX15SW-31P-C)

Note 1 : Packaged in trays.

Note 2 : Dimensions in parenthesis ( ) are reference dimensions.

Part No. HRS No.

No. of contacts

RoHS

FX15SW-31P-C 575-2113-1 31 Yes

Part No. HRS No.

No. of contacts

A B C D E F RoHS

FX15M-21P-C 575-2109-4 21 24.8 20.5 13.7 25.8 9 10 Yes

FX15M-31P-C 575-2108-1 31 29.8 25.5 18.7 30.8 14 15

Note 1 : Sold in 100 piece packages. Please order in full package quantities.

Note 2 : Dimensions in parenthesis ( ) are reference dimensions.

Dec.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

BPlug crimp contacts

Part No. HRS No. Packaging Quantity Finish RoHS

FX15-2830PCFB 575-2002-0 Reel 20,000 pcs/reel Gold plated Yes

FX15-3032PCFB 575-2003-3

●Applicable cable (Tin plated, annealed copper wire)

FX15-2830PCFB

Applicable wire size

(Stranded wire conductor) Jacket diameter UL No.

28 AWG (7/0.127mm) Ø0.56 to 0.72mm 1517

30 AWG (7/0.1mm) 1571

FX15-3032PCFB

Applicable wire size

(Stranded wire conductor) Jacket diameter UL No.

30 AWG (7/0.1mm) Ø0.5 to 0.6mm 1516, 1571(Note)

32 AWG (7/0.08mm) 1571

●Wire strip length: 1.1 to 1.8mm

Note : When using wires other than those noted above, please contact Hirose for asistance.

●Tools

Item Part No. HRS No.

Applicable crimp contact

Applicator AP105-FX15-2830 901-4036-0 FX15-2830PCFB

AP105-FX15-3032 901-4033-1 FX15-3032PCFB

Press unit CM-105C 901-0001-0 –––––––––

0.5±0.15 0.9±0.15

0.72±0.1

(7)

2±0.15

0.35±0.1

t=0.15±0.05

Dec.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

8¤%#&*

9¤%#&*

E2%#*¤%#&

'#,¤%#&*

Cd#& Cd#c

Cd#&

Cd#'

Cd#c

Cd#c"&

(#*¤%#(

6

7¤%#(

-#,*¤%#(

&(

EdaVg^o^c\bVg`

^cY^XVidg

●Plug – Micro-coaxial cable (FX15S-**P-0.5SD)

6¤%#'

&&#)*¤%#(

7¤%#' '#'¤%#'

&#**¤%#'

●Ground plate for micro-coaxial cable type

Part No. HRS No.

No. of contacts

A B RoHS

FX15S-41P-GND 575-2111-6 41 29.2 30.06 Yes

FX15S-51P-GND 575-2117-2 51 34.2 35.06

Note 1 : Packaged in trays.

Note 2 : Dimensions in parenthesis ( ) are reference dimensions.

Part No. HRS No. No. of contacts A B C D RoHS

FX15S-41P-0.5SD 575-2110-3 41 31.9 29.6 27.57 20 Yes

FX15S-51P-0.5SD 575-2118-5 51 36.9 34.6 32.57 25

Note 1 : Packaged in trays.

Note 2 : Dimensions in parenthesis ( ) are reference dimensions.

●Applicable cable (Micro-coaxial cable)

Wire size

(Standed wire inner conductor) Jacket diameter

36 AWG (7/0.05mm)

0.3mm to 0.5mm38 AWG (7/0.04mm)

40 AWG (7/0.03mm)

No. of contacts A B

41 23.1 20

51 28.1 25

●Cable preparation

7¤%#&*

E2%#*¤%#%,

%#.B6M

'#& %

"%#&

>ccZgXdcYjXidg

>chjaVidg

DjiZgXdcYjXidg

%#+¤%#&

(+id)%6L<B^Xgd"XdVm^VaXVWaZ

& %#%*

"%#'

6¤%#'

<gdcY^c\WVg

& B>C

HdaYZgXdVi

?VX`Zi

Dec.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

No.1

No.2

No.31

No.30

P=0.5±0.1

15±0.15

19.82±0.2

25.7±0.3

4±0.3

5.6±0.3

(6)

(0.8)

0.9±0.2

22.8±0.3

4.8±0.3

1.5±0.2 1±0.2 1±0.2 1.5±0.2 0.8±0.1

■Receptacles

●Vertical, with shielding (FX15-31S-0.5SV)

1.5 0

-0.05

3.2+0.05

2-Ø1(TH)

2-Ø1.4(LND) 0.9 0

-0.1

4.1+0.1

17.72 0

-0.1

21.92 +0.1

2.2 0

-0.1

6.7+0.1

22.8±0.05

15±0.05

P=0.5±0.03

0.3±0.03(Land)

0.25±0.03(Metal mask)

0.2+0.1

Note 1 : The co-planarity of the terminal leads is as follows:

• All signals and shield leads “c” and “d”: 0.1mm max.

• Shield leads “a”, “b”, “e” and “f”: 0.15mm max.

2 :

Area indicated by the crosshatched lines must be free of conductive traces or the conductive traces must be covered

by resist film.

3 : Packaged on tape-and-reel.

4 : Dimensions in parenthesis ( ) are reference dimensions.

BRecommended PCB mounting pattern and metal mask dimensions

Part No. HRS No.

No. of contacts

RoHS

FX15-31S-0.5SV(**) 575-2201-7 ** 31 Yes

[Speciﬁ cation Number : **, (**) ]

Blank : Embossed packaging (1,000 pcs/reel)

(30) : Embossed packaging (100 pcs/reel)

Dec.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

4.45±0.1

(3)

(0.2) (1.7)

0.5±0.1

A±0.2

P=1±0.1

C±0.15

D±0.15

B±0.2

E±0.3

0.2±0.05

No.1

No.2 No.n

No.n-1

(2.6)

(4)

Polarizing mark

indicator

4.4±0.3

●Right angle with shields – enhanced shielding (FX15S-**S-0.5SH)

L 0

-0.05

4.25

4.15

K±0.05

0.5±0.03

0.25±0.03(Metal mask)

J 0

-0.05

H+0.05

G 0

-0.05

F+0.05

3.55 +0.05

2.05 0

-0.05

M+0.05

N23.2 0

-0.05

P26.8+0.05

3.7

+0.05

1.45 0

-0.05

2.2+0.05

1.7 0

-0.05

3.7

+0.05

13.85

0.3±0.03(Land)

Note 1 : The coplanarity of the terminal leads is 0.1mm max. for all signal leads and 0.15mm max. for the shield leads.

2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and

latch lock operation.

3 :

Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered

by resist film.

4 : The area marked indicates vacuum pick-and-place area for board placement with automatic equipment.

5 : Vacuum pick-up area

6 : Packaged on tape-and-reel.

7 : Dimensions in parenthesis ( ) are reference dimensions.

BRecommended PCB mounting pattern and metal mask dimensions

Part No.

FX15S-31S-0.5SH(**)

FX15S-41S-0.5SH(**)

FX15S-51S-0.5SH(**)

575-2306-5 **

575-2307-8 **

575-2303-7 **

HRS No.

No. of contacts

A B

27.8

32.8

37.8

28.8

33.8

38.8

24.8

29.8

34.8

21.6

26.6

31.6

27.4

32.4

37.4

J K

------

5.2

------

8.8

13.2

18.2

23.2

16.8

21.8

26.8

24.8

29.8

34.8

Yes

S RoHS

Dec.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

4.3±0.3

4.8±0.3

(5.5)

Vacuum pick and place area

Polarizing mark

indicator

No.1

No.2

No.n

No.n-1

6.55±0.3

B±0.2

D±0.15

P=1±0.1

C±0.15

A±0.2

0.5±0.1

0.2±0.05

6.15±0.3

●Right angle, without shielding (FX15M-**S-0.5SH)

E±0.05

0.3±0.03(Land)

0.9±0.03

3.7 0

-0.05

7.4+0.05

(1.85)

0.25±0.03(Metal mask)

14 2

F±0.05

P=0.5±0.03

1.9 0

-0.05

3.4+0.05

Note 1 : The co-planarity of all terminal leads is 0.1mm max.

2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and

latch lock operation.

3 : Packaged on tape-and-reel.

Recommended PCB mounting pattern and metal mask dimensions

Part No. HRS No.

No. of contacts

A B C D E F G RoHS

FX15M-21S-0.5SH(**) 575-2309-3 ** 21 10 22.4 9 10 17.9 10 35 Yes

FX15M-31S-0.5SH(**) 575-2308-0 ** 31 15 27.4 14 15 22.9 15 40

[Speciﬁ cation Number : **, (**) ]

Blank : Embossed packaging (1,000 pcs/reel)

(30) : Embossed packaging (100 pcs/reel)

Dec.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

0.18±0.05

1.5±0.1

3.1±0.2

4.45±0.2

0.5±0.1

F±0.3

1.5±0.1

(0.25 ) (1.1)

P=1±0.1

G±0.15

H±0.15

P=1±0.1

No.1 No.n

4.4±0.3

P=0.5±0.1

C±0.2

B±0.2

E±0.2

P=D±0.1

A±0.3

Polarizing mark

indicator

● Right angle with shields – enhanced shielding (FX15SC-**S-0.5SH)

PCB mounting pattern : VESA standard

1.55±0.05

5.6

3.5±0.05

5.1±0.05

J±0.05

2.05±0.05

2.5±0.05

C±0.05

P=0.5±0.03 n-0.25±0.03

B±0.05

2.5±0.05

1.55±0.05

E±0.05

P=D±0.05

6-1.3±0.05

No.1 No.n

Recommended PCB mounting pattern and metal mask dimensions

Note 1 : The coplanarity of the terminal leads is 0.1mm max.

2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and

latch lock operation.

3 :

Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered

by resist film.

4 : Packaged on tape-and-reel.

5 : Dimensions in parenthesis ( ) are reference dimensions.

Part No. HRS No.

No. of contacts

A B C D E F G H J K RoHS

FX15SC-41S-0.5SH(**)

575-2310-2 **

41 32.85 26 20 4 20 32.4 19 20 29.75 45 Yes

FX15SC-51S-0.5SH(**)

575-2311-5 **

51 37.85 31 25 5 25 37.4 24 25 34.75 50

[Speciﬁ cation Number : **, (**) ]

Blank : Embossed packaging (1,000 pcs/reel)

(30) : Embossed packaging (100 pcs/reel)

Dec.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

E±0.3

A±0.2

D±0.2

P=C±0.1 0.5±0.1

P=0.5±0.1

1.5±0.1

0.18±0.05

No.n

B±0.2

No.1

5.3±0.3

4.2±0.2

5.5±0.3

● Vertical with shields – enhanced shielding (FX15SC-**S-0.5SV)

PCB mounting pattern : VESA standard

B±0.05

A±0.05

D±0.05

A±0.05

P=C±0.05

P=0.5±0.3 n-0.25±0.03 2.5±0.05

3.5±0.051.55±0.05 1.55±0.05

2.5±0.056-1.3±0.05

No.1 No.n

Recommended PCB layout and metal mask dimensions

Note 1 : The coplanarity of the terminal leads is 0.1mm max.

2 :

Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered

by resist film.

3 : Packaged on tape-and-reel.

Part No. HRS No.

No. of contacts

A B C D E RoHS

FX15SC-41S-0.5SV(**) 575-2205-8 ** 41 26 20 4 20 32.4 Yes

FX15SC-51S-0.5SV(**) 575-2204-5 ** 51 31 25 5 25 37.4

[Speciﬁ cation Number : **, (**) ]

Blank : Embossed packaging (1,000 pcs/reel)

(30) : Embossed packaging (100 pcs/reel)

Dec.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

A±0.1

B±0.1

C±0.3

Ø1.5 +0.1

4±0.1

12±0.1

(0.5)

(4.7)

(6.7)

Unreeling direction

(4.8)

(0.5)

(6.3)

Unreeling direction

40.45±0.1

44±0.3

20.25±0.1 1.75±0.1

Ø1.5 +0.1

4±0.1

2±0.15

12±0.1

Packaging Specifications

● Vertical, with shields

(FX15-31S-0.5SV)

Part No. HRS No.

No. of contacts

FX15-31S-0.5SV(**) 575-2201-7 **

31 44.5

● Right angle, with shields-enhanced shielding

(FX15S-**S-0.5SH)

Part No. HRS No.

No. of contacts

ABCD

FX15S-31S-0.5SH(**) 575-2306-5 **

31 20.3 40.5 44 44.5

FX15S-41S-0.5SH(**) 575-2307-8 **

41 26.3 52.5 56 56.5

FX15S-51S-0.5SH(**) 575-2303-7 **

●

Right angle, without shields

(FX15M-**S-0.5SH)

Part No. HRS No.

No. of contacts

ABCD

FX15M-21S-0.5SH(**) 575-2309-3 **

21 20.2 40.4 44 44.5

FX15M-31S-0.5SH(**) 575-2308-0 **

A±0.1

B±0.1

C±0.3

Ø1.5+0.1

4±0.1

2±0.1

12±0.1

(0.5)

(5.15)

(6.5)

Unreeling direction

Ø13±0.5

(1.6)

(Ø380)

(Ø80)

(D)

●Reel dimensions

Dec.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

A±0.1

B±0.1

C±0.3

Ø1.5

4±0.1

2±0.1

12±0.1 (0.5)

(6.7)

+0.1

Unreeling direction

● Right angle with shields – enhanced shielding

(FX15SC-**S-0.5SH)

Part No. HRS No.

No. of

contacts ABCD

RoHS

FX15SC-41S-0.5SH(**) 575-2310-2 **

26.2 52.4 56 56.5

Yes

FX15SC-51S-0.5SH(**) 575-2311-5 **

● Vertical with shields – enhanced shielding

(FX15SC-**S-0.5SV)

Part No. HRS No.

No. of

contacts ABCD

RoHS

FX15SC-41S-0.5SV(**) 575-2205-8 **

26.2 52.4 56 56.5

Yes

FX15SC-51S-0.5SV(**) 575-2204-5 **

Unreeling direction

(0.5)

A±0.1

B±0.1

C±0.3

Ø1.5

+0.1

4±0.1

2±0.1

12±0.1 (7)

Ø13±0.5

(1.6)

(Ø380)

(Ø80)

(D)

●Reel dimensions

Dec.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

250

150ç

180ç

30±10sec.

90±30sec.

230ç

MAX 250ç

Time (sec.)

Sodering

(230çmin)

Preheating(150 to 180ç)

230

180

150

100

Temperature (ç)

BRecommended temperature profile

HRS test conditions

Test board Glass epoxy 40mm∞30mm∞1mm thick

Solder method : Reflow

Solder composition : Paste

96.5%Sn/3%Ag/0.5%Cu

Metal mask : 0.12mm thick

Reflow cycles : 2 cycles

The temperature profile is based on the above

conditions.

In individual applications the actual temperature

may vary, depending on solder paste type, volume/

thickness and board size/thickness. Consult your

solder paste and equipment manufacturer for

specific recommendations.

Note : The temperature profile indicates the maximum temperature

of the connector surfaces at the highest point from the PCB

mounting surface.

BWashing Conditions

Water Type Washing

When using water type cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the

documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins.

Be careful that parts are not left with moisture remaining on them.

Washing Precautions

Residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give rise to

the deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been

performed.

Organic Solvent Washing

Solvent type Room temperature washing Heated washing

IPA (Isoporopyl alcohol) Yes Yes

Dec.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

Precautions and recommendations

Retention tab

Crimp side

Molded-in lance

Molded-in lance Retention tab facing down

Retention tab facing up

Retention tab

◆Wire termination

The following documents will be needed in order to perform the cable terminations.

1Basic cable termination and crimp requirements (general explanations).

2Contact crimp termination machine instruction manual (Explanation of the press)

3Applicator parts installation table (Applicator installation explanation)

4Crimp conditions table (Crimp height/Tensile strength standard values)

5Crimp quality fundamentals manual (Bell-mouth dimensions, bent up, bent down, rolling, etc.)

Correct cable preparation and crimp termination is based on understanding and following the procedures in the above documents.

◆Insertion of the crimp contacts in the housing

Crimp contacts are inserted in the housing as illustrated below.

Exercising caution when inserting, align the retention tab of the contact with the corresponding molded-in lance in the

housing’s contact cavity and push the contacts in.

Make sure that the contact is fully inserted and the retention tab clears the molded-in lance.

◆Verify that the retention tabs clear the molded-in lances as shown on the illustration below.

Light pull on the wire, with force NOT EXCEEDING 3N will also verify the correct contact insertion.

◆Removal of the contacts

Using sharp-pointed tool of appropriate size gently lift the molded-in tab and pull-out the terminated contacts.

Excersize caution as NOT to damage the molded-in lance.

Should the damage occur, the entire housing will need to be replaced.

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

Soldering area 1

Soldering area 2

(Ground harness examples)

B B

[ Soldering precautions related to FX15S-**P-C connectors ]

◆Grounding Methods of the ground wire or shields for the cable assemblies

1 Solder the ground wire or the shields ONLY in the areas specifically designated for this purpose, as shown on the

illustrations below.

2Observe the soldering iron tip temperature and soldering time specified.

3Do not apply excessive force to the connector by pressing it with the tip of a soldering iron.

4Do not splatter the flux from the solder core.

Precautions and recommendations

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

2 Minimize the length of outer conductor beyond the ground the

bar.

3 Length of cutting the extra cable should be 2.1mm Max.

Any longer cable may cause contact with the connector

during assembly and could damage the product.

Recommended minimum length is 2.0mm, but this can be

altered as long as good soldering ability is maintained.

4Pre-solder and coat the inner conductor at the cable end.

2. Recommended solder for the assembly is flux cored solder with

0.2mm dia. (Lead-free: Sn-3Ag-0.5Cu), 21mm length.

If additional flux is used, make sure to prevent wicking onto the

contact area.

Wicking onto the contact area will cause the contacts to fail.

3. Before soldering the cable and connector with a cable assembly

machine, check the points to avoid below.

1 Misalinment of cable end to the terminals in pitch direction

2 Excessive floating of cable end

4. Follow the recommended temperature profile shown below for

the soldering.

The optimum conditions for soldering can vary depending on cable type and length, and solder type. Be sure to check the

recommended temperate profile and adjust the conditions accordingly.

◆Plug – micro-coaxial cable

Cautions for soldering

1. For the micro coaxial cable assembled to this connector, cable alignment process as shown in "Recommended cable" on

the page 1 is required before assembly.

Width of ground bar shall be 1.05mm Max. including misalignment of overlapping, flush by cutting, side drop or soldering.

Using an inadequate cable will interfere the assembly to the connector. Forceful assembly and soldering could cause

mis-soldering and damage the product.

Precautions and recommendations

Inner conductor

Outer conductor

Grounding bar

w w

rSolder coating

qMisalignment in pitch direction wfloating

50ç

250ç

265ç

Pre-heating

Heating

Idling

2s 1s 2s 3-4s

220ç

Duration of pressure application

Solder tip

pressurization

Temperature

Duration

Heating

265±5ç

3~4 sec

13~17N

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

[ Coutions for potting process ]

1. Protect the soldered area by UV cured resin (referred as "potting" hereafter), in order to prevent cable breakage during

cabling and other issues.

2. Apply 3033 manufactured by THREEBOND CO., LTD. or any equivalent product for potting.

Follow the instruction of the potting manufacturer for UV curing exposure.

3. Refer to the following conditions the potting area.

4. Use extreme care in handling the soldered and potted assembly. Too much stress applied to the cable could break it.

5. After soldering, check that no defect is found at soldered area.

Examples of correct soldered and defective soldered state are shown below.

Precautions and recommendations

Correct soldering

Solder shortage

solder bridge

Floating

A 0

-3

2.15 0

-0.4

1.25 0

-0.75

Enlarged view

23.7

28.7

Number of contacts A

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

3. Check the six fitting points after assembly and make sure that they are all correctly fitted together.

[ Soldering to ground plate ]

1. Solder down the metal bar of the cable and ground plate after the assembly of the ground plate to enhance grounding

capability and to protect against vertical cable puling forces.

[ Coutions for ground plate assembly ]

1. Attach a ground plate separately provided as FX15S-41P-GND after the cable assembly process.

Place the ground plate onto the connector horizontally and pinch the two components from top and bottom with your fingers.

Precautions and recommendations

Pinch from top and bottom with fingers

Ground plate

(FX15S-41P-GND)

qAssembly wHorizontally

from the top

ePinch with fingers

Fitting

AGround plate does not hook the

protrusion of connector housing

Ground plate hooks the

protrusion of connector housing

How to check fitting points

OK NG

(Cut section of fitting points)

Soldering Soldering

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

Precautions and recommendations

Connectors

Packaging

Triangle mark

Mating

Arrow mark

Triangle mark

Center mark Center mark

◆Packaging of the complete cable assemblies

Exercise caution as not to tangle, twist or deform the complete cable assemblies when packaging. Special care should be

taken NOT to apply any excessive stress to the individual wires.

When removing the cable assemblies from the packaging do not pull on the wires. Make sure that the latch-locks are not

interfering with packaging.

◆Mating of the connectors

These connectors have a built in polarizing feature and will NOT mate when reversed. Do NOT try and force tem together.

Align the connectors as shown on the illustration below and fully insert the plug into the receptacle. Confirm that both latch-

locks are fully engaged.

Additionally, this connector is equipped with reverse-insertion preventing mechanism, but a forced mating with a minimum

force of 25N could damage the connector.

Avoid any inappropriate mating, and perform the mating operation after checking the above-mentioned polarity indication.

◆Treatment after mating has been completed

After mating, please take care to prevent any stress or load on the connector during the routing of cables.

If a load of a minimum of 5N is applied on the cable, the cable (crimp contact) could come off. Further, if the entire cable is

pulled with a minimum force of 20N, the connector could be broken.

Please take extra care not to pull the cable and cause cable disconnection.

If you use a small gauge coaxial plug, a repeated rotation could also cause cable disconnection. Do not use the cable by

rotating it repeatedly. The rotation times should be limited to a maximum of 10 even if rotation is required for routing.

If your use requires folding back of the cable over the base of the connector, make sure to maintain a large turn-back

radius away from the connector base.

Pulling in the horizontal direction:

Not acceptable

When you use the cable

by turning it back

Take a large radius

Keep the turn-back position away

from the root of the connector.

Rotation in the vertical direction:

Up to a maximum of 10 times

Pulling in the vertical direction:

Not acceptable

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

Precautions and recommendations

2Pull straight back.

Press

Lock latches

◆Handling of Connectors after Mating

Do not to apply excessive force to the connectors when routing the cable after mating.

Pulling on the entire cable with a force of 20N or greater can damage the connector. Please take care not to pull the cable.

◆Un-mating of the connectors

Equally depress both sides of the latch-locks as shown on the illustration and pull the plug straight out. Do not pull on the

cables!

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

BTechnical Information (FX15S Series)

●Eye Pattern Waveforms (700MHz)

●Shielding Effectiveness (Shielding Characteristics Comparison Using a 2-chamber Shielded Room)

Notes : The measurement value of “Without plug-side shields + Without receptacle-side shields” are taken as the zero level of

the graph vertical axis dB.

The respective results express the noise suppression effect (dB) as a relative comparison value to the “without shields”

condition as the reference.

With cable-side shields + With PCB-side shields

With cable-side shields + Without PCB-side shields

Without cable-side shields + With PCB-side shields

Without cable-side shields + Without PCB-side shields

¤ (0 dB line)

-10 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.5 2

Frequency (GHz)

Shielding Effect (dB)

Measured shielding effectiveness for frequencies from 100MHz to 2GHz.

Shielded connectors show noise suppression of 10db to 20dB, when compared with connectors without the shields.

1 m Cable Length 1.5 m Cable Length

FX15 Series●1mm Pitch Wire-to-Board Connectors supporting LVDS signal

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 10/2015. Contents are subject to change without notice for the purpose of improvements.

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: +81-45-620-3526 Fax: +81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

USA:

HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE

3255 Scott Boulevard, Building 7, Suite 101

Santa Clara, CA 95054

Phone : +1-408-253-9640

Fax : +1-408-253-9641

http://www.hirose.com/us/

USA:

HIROSE ELECTRIC (U.S.A.), INC. CHICAGO OFFICE

580 Waters Edge Lane, Suite 205 Lombard IL

60148

Phone : +1-630-282-6701

Mail : inquiries@hirose.com

http://www.hirose.com/us/

USA:

HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS

2688 Westhills Court, Simi Valley, CA 93065-6235

Phone : +1-805-522-7958

Fax : +1-805-522-3217

http://www.hirose.com/us/

CHINA:

HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH

A1001, Ocean International Center, Building 56# East 4th

Ring Middle Road, ChaoYang District, Beijing, 100025

Phone : +86-10-5165-9332

Fax : +86-10-5908-1381

http://www.hirose.com/cn/

TAIWAN:

HIROSE ELECTRIC TAIWAN CO., LTD.

103 8F, No.87, Zhengzhou Rd., Taipei

Phone : +886-2-2555-7377

Fax : +886-2-2555-7350

http://www.hirose.com/tw/

GERMANY:

HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH

Herzog-Carl-Strasse 4 D-73760 Ostfildern

(Scharnhauser Park)

Phone : +49-711-4560-02-1

Fax : +49-711-4560-02-299

http://www.hirose.com/eu/

GERMANY:

HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE

Muggenhofer Str. 136 90429 Nuernberg

Phone : +49-911 32 68 89 63

Fax : +49-911 32 68 89 69

http://www.hirose.com/eu/

THE NETHERLANDS:

HIROSE ELECTRIC EUROPE B.V.

Hogehillweg #8 1101 CC Amsterdam Z-O

Phone : +31-20-6557460

Fax : +31-20-6557469

http://www.hirose.com/eu/

GERMANY:

HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE

Bayernstr. 3, Haus C 30855 Langenhagen, Germany

Phone : +49-511 97 82 61 30

Fax : +49-511 97 82 61 35

http://www.hirose.com/eu/

USA:

HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)

17197 N. Laurel Park Drive, Suite 253, Livonia,

MI 48152

Phone : +1-734-542-9963

Fax : +1-734-542-9964

http://www.hirose.com/us/

FRANCE:

HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE

Regus La Garenne Colombes,Place de La Belgique,

71 Boulevard National La Garenne Colombes, 92250, France

Phone : +33 (0) 1 7082 3170

Fax : +33 (1) 7082 3101

http://www.hirose.com/eu/

UNITED KINGDOM:

HIROSE ELECTRIC EUROPE BV (UK BRANCH)

4 Newton Court, Kelvin Drive, Knowlhill,

Milton Keynes, MK5 8NH

Phone : +44-1908 202050

Fax : +44-1908 202058

http://www.hirose.com/eu/

CHINA:

HIROSE ELECTRIC (SHANGHAI) CO., LTD.

1601, Henderson Metropolitan, NO.300, East Nanjing

Road, Huangpu District, Shanghai, China 200001

Phone : +86-21-6391-3355

Fax : +86-21-6391-3335

http://www.hirose.com/cn/

HONG KONG:

HIROSE ELECTRIC HONGKONG TRADING CO., LTD.

Room 1001, West Wing, Tsim Sha Tsui Centre, 66

Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong

Phone : +852-2803-5338

Fax : +852-2591-6560

http://www.hirose.com/hk/

CHINA:

HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.

Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,

5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008

Phone : +86-755-8207-0851

Fax : +86-755-8207-0873

http://www.hirose.com/cn/

SINGAPORE:

HIROSE ELECTRIC SINGAPORE PTE. LTD.

10 Anson Road #26-16, International Plaza

079903, Singapore

Phone : +65-6324-6113

Fax : +65-6324-6123

http://www.hirose.com/sg/

KOREA:

HIROSE KOREA CO., LTD.

250, Huimanggongwon-ro, Siheung-si,

Gyeonggi-do, Korea, 429-849

Phone : +82-31-496-7000,7124

Fax : +82-31-496-7100

http://www.hirose.co.kr/

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE

Office NO.519, Regus-Green Boulevard, Level5, Tower C,

Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India

Phone : +91-12-660-8018

Fax : +91-120-4804949

http://www.hirose.com/sg/

THAILAND:

HIROSE ELECTRIC SINGAPORE PTE. LTD.

BANGKOK OFFICE (REPRESENTATIVE OFFICE)

Unit 4703, 47th FL., 1 Empire Tower, South Sathorn

Road, Yannawa, Sathorn, Bangkok 10120 Thailand

Phone : +66-2-686-1255

Fax : +66-2-686-3433

http://www.hirose.com/sg/

INDIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE

Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma

Gandhi (MG) Road, Bangalore 560 001, Karnataka, India

Phone : +91-80-4120 1907

Fax : +91-80-4120 9908

http://www.hirose.com/sg/

MALAYSIA:

HIROSE ELECTRIC SINGAPORE PTE. LTD.

1-10-07, Suntech @ Penang Cybercity (1164),Lintang

Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia.

Phone : +604-619-2564

Fax : +604-619-2574

http://www.hirose.com/sg/