Chip Resistor Networks MNR Series < Not for Automotive application > Datasheet Features 1) Can be mounted even more densely than chip resistors. 2) Convex electrodes secures visual inspection of fillets after soldering. 3) ROHM resistors have obtained ISO9001 / ISO / TS16949 certification. Size (mm) (inch) No. of terminals No. of elements Type Code MNR02 1005 x 2 0402 x 2 4 2 MRAP MNR04 1005 x 4 0402 x 4 8 4 MRAP MNR12 1608 x 2 0603 x 2 4 2 ERAP MNR14 1608 x 4 0603 x 4 8 4 ERAP MNR15 1608 x 5 0603 x 5 10 8 ERRP MNR18 1605 x 8 0602 x 8 16 8 ERAP Part No. Packing Specification Quantity / Reel Paper tape (2mm Pitch) 10,000 Paper tape (4mm Pitch) 5,000 Part Number Description M N R 0 2 Part No. Size (mm [inch]) MNR 02 (1005 [0402] x 2) 04 (1005 [0402] x 4) 12 (1608 [0603] x 2) 14 (1608 [0603] x 4) 15 (1608 [0603] x 5) 18 (1605 [0602] x 8) (Chip Resistor Networks) M R A P J 1 0 5 Type Code Resistance Tolerance Nominal Resistance F ( 1% ) J ( 5% )(Including jumper type) Resistance code, 3 or 4 digits. 000 denotes jumper type. Resistance tolerance F J Resistance code : : 4 digits 3 digits Ex.) 1 = 1R0 9.1 = 9R1 10 = 10R0 100 1M = 1004 105 www.rohm.com c 2015 ROHM Co., Ltd. All rights reserved. 1/5 ( 5% ) ( 5% ) ( 1% ) ( 5% ) ( 1% ) ( 5% ) 2015.02 - Rev.C MNR series < Not for Automotive application > Datasheet Products List Part No. MNR02 Type Code MRAP Rated Power (70C) Limiting Element Voltage (W) (V) Maximum Overload Voltage (V) 0.063 / Element 25 - Temperature Resistance Coefficient Tolerance (ppm / C) (%) 200 J(5%) Resistance Range Series 10 to 1M E24 Operating Temperature Range (C) Jumper type : Rmax = 50m / Imax. = 1A (Element) +500/-300 MNR04 MRAP 0.063 / Element 25 1 to 9.1 E24 J(5%) 50 200 10 to 910k Jumper type : Rmax = 50m / Imax. = 1A (Element) MNR12 ERAP 0.063 / Element 50 -55 to +155 200 J(5%) 10 to 1M 200 F(1%) 10 to 1M - E24 Jumper type : Rmax = 50m / Imax. = 1A (Element) 500 MNR14 ERAP 0.063 / Element 50 2.2 to 6.8 E6 J(5%) 200 - 10 to 1M E24 200 10 to 1M F(1%) Jumper type : Rmax = 50m / Imax. = 1A (Element) MNR15 ERRP 0.031 / Element 12.5 200 - 56 to 100k J(5%) E24 -55 to +125 MNR18 ERAP 0.063 / Element 25 250 - 10 to 1M J(5%) E24 Jumper type : Rmax = 50m / Imax. = 1A (Element) Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product before using or ordering it. Circuit Construction MNR02 / 12 R1 R2 MNR04 / 14 R1 R2 R3 MNR15 R1=R2=R3=R4 www.rohm.com c 2015 ROHM Co., Ltd. All rights reserved. R1 R2 R3 R6 R7 R8 R4 R1 R2 R3 R4 R5 R6 R7 R8 R4 R5 R1=R2 MNR18 R1=R2=R3=R4=R5=R6=R7=R8 R1=R2=R3=R4=R5=R6=R7=R8 2/5 2015.02 - Rev.C MNR series < Not for Automotive application > Datasheet Chip Resistor Dimensions and Markings MNR02 / 12 MNR04 / 14 b2 b2 MNR15 b1 L c c a p c a 103 a 103 W W W a a a p p b2 t b1 t L t L MNR18 <Marking method> There are three or four digits used for the calculation number according to IEC code and "R"is used for the decimal point. L p c a 102 W a b2 b1 t (Unit : mm) b1 b2 c p Marking existence Including jumper type 0.150.1 - 0.330.1 0.250.1 0.67 No 0.20.1 0.30.1 - 0.250.2 0.5 Yes 0.450.1 0.30.2 - 0.60.15 0.30.2 0.8 Yes 1.60.15 0.50.1 0.30.2 0.50.15 - 0.30.2 0.8 Yes 3.20.2 1.60.15 0.550.1 0.30.15 0.320.15 - 0.30.15 0.64 Yes 4.00.2 1.60.1 0.40.1 0.30.2 - 0.30.2 0.5 Yes Part No. Type Code (mm) (inch) L W t a MNR02 MRAP 1005 x 2 0402 x 2 1.00.1 1.00.1 0.30.1 MRAP 1005 x 4 0402 x 4 2.00.1 1.00.1 0.40.1 MNR12 ERAP 1608 x 2 0603 x 2 1.60.15 1.60.15 MNR14 ERAP 1608 x 4 0603 x 4 3.20.2 MNR15 ERRP 1608 x 5 0603 x 5 MNR18 ERAP 1605 x 8 0602 x 8 MNR04 0.250.1 Land pattern Example Land MNR02 / 12 MNR04 / 14 MNR15 MNR18 E C C A D A D C C B P2 P1 C C A D A D C C B E P1 B B P2 P2 P1 P1 P2 P1 B P1 (Unit : mm) Dimensions Type Code A B C D MNR02 MRAP 0.5 0.35 to 0.4 0.5 MNR04 MRAP 0.5 0.4 0.5 MNR12 ERAP 1.0 0.4 to 0.6 0.7 to 0.8 MNR14 ERAP 1.0 0.4 to 0.6 0.7 to 0.8 MNR15 ERRP 1.0 0.48 MNR18 ERAP 1.0 0.3 Part No. www.rohm.com c 2015 ROHM Co., Ltd. All rights reserved. E P1 1.5 - 0.65 to 0.7 - 1.5 0.3 0.5 0.5 to 0.55 2.4 to 2.6 - 0.8 to 1.0 - 2.4 to 2.6 0.4 0.8 0.8 to 0.9 0.7 to 0.8 2.4 to 2.6 0.32 0.64 0.72 0.7 to 0.8 2.4 to 2.6 - 0.5 - 3/5 P2 2015.02 - Rev.C MNR series < Not for Automotive application > Datasheet Derating Curve When the ambient temperature exceeds 70C, power dissipation must be adjusted according to the derating curves below. MNR02 / 04 / 12 / 14 80 60 40 20 0 MNR15 / 18 100 PERCENT RATED POWER (%) PERCENT RATED POWER (%) 100 -55 0 70 100 80 60 40 20 0 155 -55 0 70 100 125 AMBIENT TEMPERATURE (C) AMBIENT TEMPERATURE (C) Characteristics Test Items Guaranteed Value Resistor Type Jumper Type Test Conditions Resistance See "Products List" 20C Variation of resistance with temperature See "Products List" Measurement : +20 / -55 / +20 / +125C Overload Solderability Resistance to soldering heat (2.0%+0.1) Max. 50m A new uniform coating of minimum of 95% of the surface being immersed and no soldering damage. (1.0%+0.05) Max. 50m No remarkable abnormality on the appearance. Rated voltage (current) x2.5, 2s. Maximum overload voltage Rosin*Ethanol : 25% (weight) Soldering condition : 2355C Duration of immersion : 2.00.5s Soldering condition : 2605C Duration of immersion : 101s Rapid change of temperature (1.0%+0.05) Max. 50m Test temp. : -55C to +125C 5cycle Damp heat, steady state (3.0%+0.1) Max. 100m 40C, 93%RH (Relative Humidity) Test time : 1,000h to 1,048h Endurance at 70C (3.0%+0.1) Max. 100m 70C Rated voltage (current) 1.5h : ON - 0.5h : OFF Test time : 1,000h to 1,048h Endurance (3.0%+0.1) Max. 100m 125C (MNR15 / 18) 155C (MNR02 / 04 / 12 / 14) Test time : 1,000h to 1,048h Resistance to solvent (1.0%+0.05) Max. 50m 235C, Immersion cleaning, 50.5min Solvent : 2-propanol (1.0%+0.05) Max. 50m Bend strength of the end face plating Without mechanical damage such as breaks. - Compliance Standard(s) : IEC60115-8 JISC 5201-8 www.rohm.com c 2015 ROHM Co., Ltd. All rights reserved. 4/5 2015.02 - Rev.C MNR series < Not for Automotive application > Datasheet Tape Dimensions (Unit : mm) Paper Tape P0 P2 P1 D0 E F Part No. Type Code W F E A0 B0 MNR02 MRAP 8.00.3 3.50.05 1.750.1 1.20.1 1.20.1 MNR04 MRAP 8.00.3 3.50.05 1.750.1 1.20.1 2.20.1 MNR12 ERAP 8.00.3 3.50.05 1.750.1 1.90.1 1.90.1 MNR14 ERAP 8.00.3 3.50.05 1.750.1 1.90.1 3.450.1 MNR15 ERRP 8.00.3 3.50.05 1.750.1 1.90.1 3.50.2 MNR18 ERAP 12.00.2 5.50.05 1.750.1 1.90.2 4.30.2 Part No. Type Code D0 P0 P1 P2 T2 MNR02 MRAP +0.1 1.5 0 4.00.1 2.00.1 2.00.05 Max 0.5 MNR04 MRAP 1.5 +0.1 0 4.00.1 2.00.1 2.00.05 Max 1.1 MNR12 ERAP 1.5 +0.1 0 4.00.1 4.00.1 2.00.05 Max 1.1 MNR14 ERAP 1.5 +0.1 0 4.00.1 4.00.1 2.00.05 Max 1.1 MNR15 ERRP 1.5 +0.1 0 4.00.1 4.00.1 2.00.05 Max 1.1 MNR18 ERAP 1.5 +0.1 0 4.00.1 4.00.1 2.00.05 Max 1.1 W B0 A0 Top tape Base paper (Bottom tape) Cavity Components T2 Reel Dimensions 02 04 08 06 D 04 B 02 A 06 (MNR02 / 04 / 12 / 14 / 15 / 18) 08 Fig.1 C Label According to EIAJ ET-7200B (RRM) (Unit : mm) Part No. Type Code MNR02 MRAP MNR04 MRAP MNR12 ERAP MNR14 ERAP MNR15 ERRP MNR18 ERAP www.rohm.com c 2015 ROHM Co., Ltd. All rights reserved. A 1782.0 5/5 B C 601.0 9.00.5 801.0 13.80.5 D 13.50.5 2015.02 - Rev.C Notice Notes 1) The information contained herein is subject to change without notice. 2) Before you use our Products, please contact our sales representative and verify the latest specifications : 3) Although ROHM is continuously working to improve product reliability and quality, semiconductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. 4) Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. 5) The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. 6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communication, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. 7) The Products specified in this document are not designed to be radiation tolerant. 8) For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. 9) Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. 10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. 11) ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. 12) Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. 13) When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. 14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. R1102A